함정용 고장력 판재의 방호한계속도 추정을 위한 간이 실험식
Simplified Formula for Predicting the Ballistic Limit Velocity of High Strength Shipbuilding Steel Plates Based on Experimental Data
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Naval ships are designed to have a variety of active and passive systems to defend against enemy threats. One of the passive defense systems is to protect crew members and core equipment against the threat by using the outer plate of the equipment. This study was intended to deal with design methods against small arms ammunition and fragments. The Korea Institute of Machinery and Materials has measured the ballistic limit velocity of two types of high-tensile plate materials (AH36 and EH36) widely used in ships and offshore structures through tests in cooperation with various related organizations, and the result data is continuously accumulated. Based on the accumulated test results and data, such as mil test certificates of plate materials, it is intended to estimate the protection limit speed of high-tensile plates and to develop a simple calculating formula that can be used in the early design stage.
Abstract
Naval ships are designed to have a variety of active and passive systems to defend against enemy threats. One of the passive defense systems is to protect crew members and core equipment against the threat by using the outer plate of the equipment. This study was intended to deal with design methods against small arms ammunition and fragments. The Korea Institute of Machinery and Materials has measured the ballistic limit velocity of two types of high-tensile plate materials (AH36 and EH36) widely used in ships and offshore structures through tests in cooperation with various related organizations, and the result data is continuously accumulated. Based on the accumulated test results and data, such as mil test certificates of plate materials, it is intended to estimate the protection limit speed of high-tensile plates and to develop a simple calculating formula that can be used in the early design stage.
참고문헌 (17)
- Joint Technical Coodinating Group Report, "Air Force Flight Dynamics Laboratory", ~ (1976)
- Jun-Min Cheon, "Influence of Projectile Velocity on Penetration into a Steel Plate", International Journal of Precision Engineering and Manufacturing, 21(1), pp.137~144 (2020), 한국정밀공학회[DOI]
- Department of Defense, "V50 Ballistic Test for Armor. MIL-STD-662F", ~ (1997)
- Department of Defense, "Projectile, Calibers .22, .30, .50, And 20MM Fragment-Simulating. MIL-DTL-46593B", ~ (2006)
- partment of Defense, "Unified Facilities Criteria(UFC)Structures to resist the effects of accidental explosions. UFC 3-340-02", ~ (2008)
- Department of Justic, "Ballistic Resistance of Body Armor, NIJ(National Institute of Justice) Standard-0101.06", ~ (2008)
- Jordan, J.B, "Calculating fragment impact velocity from penetration data", International Journal of ImpactEngineering, 17, pp.530~536 (2010)
- Kim, J.H, "Small caliber projectile ballistic limit velocity analysis", Proceeding of the Korea Institute of Military Science and Technology, pp.3~4 (2015)
- 김종환, "적성소화기 위협에 대한 함정용 선체재질별 방호한계속도 비교 연구", 대한조선학회 논문집, 54(4), pp.286~293 (2017), 대한조선학회[DOI]
- "ASTM A131 steel, Grade AH36" (2021)[URL]
- McKenzie, G, "Design strategies for fragment and projectile penetration into steel and concrete structural elements using CONWEP", Asian Journal of Civil Engineering, 19, pp.792~809 (2018)
- "AH36, DH36, EH36 Steel Plate for Shipbuilding" (2021)[URL]
- Republic of Korea Navy, "Criteria for ballistic resistant protective materials", ~ (2020)
- Yun-ho Shin, "Test and estimation of ballistic armor performance for recent naval ship structural materials", International Journal of Naval Architecture and Ocean Engineering, 10(6), pp.762~781 (2018), 대한조선학회
- Wang, H, "Investigating the dynamic mechanical behaviors of polyurea through experimentation and modeling", Defence Technology, 15, pp.875~884 (2019)
- Wang, J, "Improvement and simulation of THOR Formula with Yaw Angle", Journal of Engineering Science and Technology Review, 7(2), pp.106~112 (2014)
- Zook, J.A, "Terminal ballistics test and analysis guidelines for the penetration mechanics branch" (1992), Ballistic Research Laboratory