정적압입 관통 실험을 이용한 복합재 적층판의 고속충격 탄도한계속도 예측
Prediction of Ballistic Limit for Composite Laminates Subjected to High-velocity Impact Using Static Perforation Test
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 논문에서는 유효 면적의 제한이 있는 복합재 적층판의 탄도한계속도를 예측하였다. 탄도한계속도를 예측하기 위해 정적압입 관통실험과 고속충격 실험 그리고 준실험식을 이용하였다. 정적압입 관통실험을 통해 하중-변위 데이터를 취득하고 이를 이용해서 관통에너지를 측정하였다. 고속충격 실험을 통해 실제 관통 속도 및 관통 에너지를 측정하였다. 정적압입 관통실험과 고속충격 실험을 통해 구한 에너지를 이용해 준실험식을 만들고, 준실험식과 고속충돌 실험결과와 비교해 보았다. 위 방법을 이용해 탄도한계속도를 예측하였고 정적압입 관통 실험과 준실험식에 의한 탄도한계속도 예측의 타당성을 확인하였다.
Abstract
The ballistic limit of Carbon/Epoxy composite laminates with the finite effective area are predicted by using the quasi-static perforation test and semi-empirical formula. The perforation energy were calculated from force-displacement curve in quasi-static perforation test. Also, the actual ballistic limit and penetration energy were obtained through the high-velocity impact test. The quasi-static perforation test and high-velocity impact test were conducted for the specimens with 3 different effective areas. In the high-velocity impact test, the air gun impact tester were used, and the ballistic and residual velocity was measured. The required inputs for the semi-empirical formula were determined by the quasi-static perforation tests and high-velocity impact tests. The comparison between semi-empirical formula and high-velocity impact test results were conducted and examined. The ballistic limits predicted by semi-empirical formula were agreed well with high-velocity impact test results.
참고문헌 (9)
- Abrate, S., "Impact on Lamina Composite Materials", Applied Mechanics Review, 44(4), pp.155~190 (1991)
- Ruiz, C., "Modelling Impact of Composite Structures Using Small Specimens in Impact Behaviour of Fiver-reinforced Composite materials and Structures" (2000), Woodhead Publishing Ltd.
- Reid, S. R., "Impact Behaviour of Fiberreinforced Composite Materials and Structures", pp.237~279 (2000), CRC Press
- Sun, C.T., "A Simple Model to Predict Residual Velocities of Thick Composite Laminates Subjected to High Velocity Impact", International Journal of Impact Engineering, 18(3), pp.339~353 (1996)
- Potti, S.V., "Prediction of Impact Induced Penetration and Delamination in Thick Composite Laminates", International Journal of Impact Engineering, 19(1), pp.31~48 (1997)
- Mines, R. A. W., "High Velocity Perforation Behaviour of Polymer Composite Laminates", International Journal of Impact Engineering, 22(6), pp.561~588 (1999)
- Ulven, C., "Effect of Projectile Shape During Ballistic Perforation of VARTM Carbon", Epoxy Composite Panels, 2003, pp.61(1), 143~150
- Wen, H. M., "Predicting the Penetration and Perforation of FRP Laminates Struck Normally by Projectiles with Different Nose Shapes", Composite Structures, 49(3), pp.321~329 (2000)
- 유원영, "정적압입 관통실험을 이용한 복합재 적층판의 고속충격 관통에너지 예측", Composites Research, 25(5), pp.147~153 (2012), 한국복합재료학회