3D 스캔을 이용한 콘센트 커버의 역설계 및 금형 개발
Reverse engineering of concentric plug cover by 3D scanning and development of injection mold
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Mold making and product manufacturing process was made by a die through a number of stages. Thereby, it takes a long period of time from the manufacture of mold until passed the products to consumers. However, it is not possible to meet the diverse desires purchasing of consumer. We made a 3D CAD Model aligned with product scan data using reverse engineering. Utilizing thereafter flow analysis to derive the optimal mold conditions, by applying the condition, and devised a mold fabrication process that is much shorter than the conventional process for fabricating a mold. In this study, the outlet cover to the product, it describes a process, as a result, it was confirmed that the number of steps can be shortened much more than the conventional process.
Abstract
Mold making and product manufacturing process was made by a die through a number of stages. Thereby, it takes a long period of time from the manufacture of mold until passed the products to consumers. However, it is not possible to meet the diverse desires purchasing of consumer. We made a 3D CAD Model aligned with product scan data using reverse engineering. Utilizing thereafter flow analysis to derive the optimal mold conditions, by applying the condition, and devised a mold fabrication process that is much shorter than the conventional process for fabricating a mold. In this study, the outlet cover to the product, it describes a process, as a result, it was confirmed that the number of steps can be shortened much more than the conventional process.
참고문헌 (6)
- 이희관, "역공학을 이용한 사출금형제작 공정에 관한 연구", 한국정밀공학회지, 19(6), pp.160~165 (2002), 한국정밀공학회
- Lee, B.W., "A study on the construction of the product shoes analysis and fabrication by rapid prototyping technique", Proceeding of KSMT 2002 Winter Annual Meeting, pp.1~5 (2002)
- 이남필, "역설계를 이용한 자동차부품의 사출성형해석의 관한 연구", 석사, 메카트로닉스공학, pp.2009
- 임원길, "사출성형의 게이트 위치 최적화", 한국정밀공학회 춘계학술대회 논문집, pp.787~791 (1996)
- 안동규, "인서트 변형을 고려한 배터리 케이스 사출 성형 해석", 대한기계학회 추계학술대회, pp.1107~1112 (2008)
- Kim, J.M., "A study on reducing deformation of a wide-thin product manufactured by injection molding", Proceeding of KSME 2008 Autumn Annual Meeting, pp.186~191 (2008)