선박용 연료절감장치 Pre-Swirl Duct의 설계 및 평가방법 연구
Pre-Swirl Duct of Fuel Oil Saving Device Design and Analysis for Ship
2
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
Recently, with oil price jumping and environmental issues, Green ship is paid deep attention to by ship owner, operator, builder, class and government. Fuel efficiency and reduction of CO2 emissions are expected to have a strong influence on the design and operation of merchant ships. Many ship owners and operators are seeking the more economic method by the best operating route and the application of reliable and effective energy saving devices. With the Energy Efficiency Design Index (EEDI) in 2013 attention will more than ever be focused at achieving maximum fuel economy in the hydrodynamic design of hull forms, their appendages and propellers. IMO requirements for CO2 emission for ships will now be implemented for vessels ordered from 1st January 2013. So far, a lot of new idea and patents have been proposed, tested, claimed and applied for various kinds of ship type. This paper shows numerical and experimental work related to a study on a energy saving devices particularly for fuller ship such as merchant vessel of Tanker and Bulker. From the bare hull wake measurements, typical upper/lower asymmetry of hull wake at the propeller disk was found. The pre-swirl duct have been designed and reviewed to recover the loss of propeller running in that condition. The general function of the pre-swirl duct was set to work against this asymmetry of wake and generate pre-swirled flow into the propeller against the propeller rotating direction.
Abstract
Recently, with oil price jumping and environmental issues, Green ship is paid deep attention to by ship owner, operator, builder, class and government. Fuel efficiency and reduction of CO2 emissions are expected to have a strong influence on the design and operation of merchant ships. Many ship owners and operators are seeking the more economic method by the best operating route and the application of reliable and effective energy saving devices. With the Energy Efficiency Design Index (EEDI) in 2013 attention will more than ever be focused at achieving maximum fuel economy in the hydrodynamic design of hull forms, their appendages and propellers. IMO requirements for CO2 emission for ships will now be implemented for vessels ordered from 1st January 2013. So far, a lot of new idea and patents have been proposed, tested, claimed and applied for various kinds of ship type. This paper shows numerical and experimental work related to a study on a energy saving devices particularly for fuller ship such as merchant vessel of Tanker and Bulker. From the bare hull wake measurements, typical upper/lower asymmetry of hull wake at the propeller disk was found. The pre-swirl duct have been designed and reviewed to recover the loss of propeller running in that condition. The general function of the pre-swirl duct was set to work against this asymmetry of wake and generate pre-swirled flow into the propeller against the propeller rotating direction.
참고문헌 (8)
- Choi, J.E., "Study on the scale effects on the flow characteristics around a full slow-speed ship", Proceedings of the 8th Numerical Ship Hydrodynamics (2003)
- 최정은, "대형 유조선의 저항 및 추진성능에 대한 축척효과의 수치적 연구", 대한조선학회 논문집, 48(3), pp.222~232 (2011), 대한조선학회
- Davis, L., "Handbook of Genetic Algorithms" (1991), Van Nostrand Reinhold
- 강용덕, "편재된 비대칭형 전류고정날개 추진시스템에 관한 연구", 대한조선학회 논문집, 41(3), pp.13~21 (2004), 대한조선학회
- 김수영, "조정점 최적탐색에 의한 Form Parameter 방법에 관한 연구", 대한조선학회 논문집, 39(4), pp.8~65 (2002), 대한조선학회
- 김수영, "다구찌 방법을 이용한 뉴로퍼지 시스템 파라미터의 최적화", 대한조선학회 논문집, 40(1), pp.9~73 (2003), 대한조선학회
- Michalewicz, Z., "Genetic Algorithms" (1995), Springer
- Takekuma, K., "Decelopment of reaction fin as a device for improvement of propulsice performance of high block coefficient ships", SNAME Shipboard Energy Conservation Symposium, pp.74~84 (1980)