수압시험 시 관 단면적 비 및 충수 속도별 탱크 내부 과압 발생에 관한 해석
Analysis of Internal Overpressure by Pipe Cross-Sectional Area Ratio and Filling Rate in the Hydraulic Test of Shipboard Tank
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study was conducted based on the case of an accident (excessive deformation) that occurred during the hydraulic test of a shipboard tank manufactured in accordance with the design regulations. Over-pressure phenomenon was noted as the main cause of accidents in the process of testing tanks without physical damage, which can be found in external factors such as cross-sectional difference between inlet pipe and air pipe and higher water filling rate than the recommended one. The main goal of this paper is to establish a safe water filling rate according to the range of sectional area ratio(SAR) reduced below the regulations for each test situation. The simulation was conducted in accordance with the hydraulic test procedure specified in the Ship Safety Act, and the main situation was divided into two types: filling the tank with water and increasing the water head to the test pressure. The structural safety evaluation of the pressure generated inside the tank and the effect on the structure during the test was reviewed according to the SAR range. Based on the results, guidelines for the optimal filling rate applicable according to SAR during the hydraulic test were presented for the shipboard tanks used in this study.
Abstract
This study was conducted based on the case of an accident (excessive deformation) that occurred during the hydraulic test of a shipboard tank manufactured in accordance with the design regulations. Over-pressure phenomenon was noted as the main cause of accidents in the process of testing tanks without physical damage, which can be found in external factors such as cross-sectional difference between inlet pipe and air pipe and higher water filling rate than the recommended one. The main goal of this paper is to establish a safe water filling rate according to the range of sectional area ratio(SAR) reduced below the regulations for each test situation. The simulation was conducted in accordance with the hydraulic test procedure specified in the Ship Safety Act, and the main situation was divided into two types: filling the tank with water and increasing the water head to the test pressure. The structural safety evaluation of the pressure generated inside the tank and the effect on the structure during the test was reviewed according to the SAR range. Based on the results, guidelines for the optimal filling rate applicable according to SAR during the hydraulic test were presented for the shipboard tanks used in this study.
참고문헌 (19)
- "Architectural structural design standards" (2005)[URL]
- "ANSYS FLUENT 12.0/12.1 Documentation" (2012)[URL]
- "Welded tanks for oil storage" (2020)[URL]
- 조형규, "과도 다차원 2상 유동 해석을 위한 비정렬 격자계에서의 Semi-Implicit 수치 해법 개발", 에너지공학, 17(4), pp.218~226 (2008), 한국에너지학회
- 정소명, "Parameter Study of Boiling Model for CFD Simulation of Multiphase-Thermal Flow in a Pipe", 한국해양공학회지, 35(1), pp.50~58 (2021), 한국해양공학회[DOI]
- Design of offshore steel structures (DNVGL-OS-C101), "Det Norske Veritas(DNV)", ~ (2018)
- Rules for classfication :Ships (RU-SHIP), "Det Norske Veritas(DNV)", ~ (2021)
- "Examples of hazards of pressure testing" (2017)[URL]
- Ansys mechanical basic, "DNDE", 221~266 (2021)
- Heo, J., "Effects of valve characteristics and pipe diameter on water hammer phenomena", Proceedings of the Korean Nuclear Society Autumn Meeting (2021), International Association of Classification Societies (IACS)
- Two-phase flow models and numerical methods of the commercial CFD codes, "Korea Atomic Energy Research Institute(KAERI)", ~ (2007)
- Rules for the classification of steel ships(Part 3-Hull Structures), "Korean Register(KR)", ~ (2021)
- "Steel structural member design criteria" (2019)[URL]
- "Three months before the Samsung’s Water Tank Disaster, There was a ‘Preview’" (2013)[URL]
- Ship safety act, "Ministry of Oceans and Fisheries(MOF)", ~, pp.Additional shipbuilding inspection, Article 11 (2020)
- National fire safety code 109, "National Fire Agency(NFA)", ~ (2013)
- "Engineering fluid mechanics" (2014)[URL]
- "An accident with brittle fracture during hydrotest" (2012)[URL]
- Vince, A., "Building better products with finite element analysis. 3rd Ed" (2009), Sci-Tech Media Publisher