임의 선박 단면형상의 입수충격력에 관한 수치적 연구
Numerical Investigation of the Impact Pressure Acting on Arbitrary Ship Sections Falling into the Water Surface
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The interaction between the hull of ship and free surface of water generates important loads during slamming motion. In the present study, the slamming load applied on the sectional surface of two-dimensional arbitrary bodies has been investigated under several falling velocities. This simulation has been done with the commercial CFD software ANSYS FLUENT®. Through the conventional MARINTEK experiments for the benchmark of the simulation, we verified the impact pressure values between the experiments and simulation results. Two arbitrary ship bow section models, Panamax-like(with small convex bulb and flare) and Post panamax-like(with large convex bulb and flare) are also investigated. Simulation results show that a maximum impact pressure on the Post panama-like shape is higher than the Panamax-like shape. According to both a lump of water generated by arbitrary shape and various dead-rise angles of the shape, the pressure picks were enhanced in the simulation
Abstract
The interaction between the hull of ship and free surface of water generates important loads during slamming motion. In the present study, the slamming load applied on the sectional surface of two-dimensional arbitrary bodies has been investigated under several falling velocities. This simulation has been done with the commercial CFD software ANSYS FLUENT®. Through the conventional MARINTEK experiments for the benchmark of the simulation, we verified the impact pressure values between the experiments and simulation results. Two arbitrary ship bow section models, Panamax-like(with small convex bulb and flare) and Post panamax-like(with large convex bulb and flare) are also investigated. Simulation results show that a maximum impact pressure on the Post panama-like shape is higher than the Panamax-like shape. According to both a lump of water generated by arbitrary shape and various dead-rise angles of the shape, the pressure picks were enhanced in the simulation
참고문헌 (15)
- "ANSYS Fluent User’s Guide" (2015)[URL]
- "ANSYS Fluent UDF Manual" (2015)[URL]
- Fairlie-Clarke, A.C., "Momentum and Gravity Effects during the Constant Velocity Water Entry of Wedge-Sections", Ocean Engineering, 35, pp.706~716 (2008)
- Greenhow, M., "Numerical simulation of non-linear free surface flows generated by wedge entry and wave maker motions", Proceedings 4th Internatioal Conference on Numerical Ship Hydrodynamics (1985)
- Kapsenberg, G. K., "Slamming of Ships Review", Philosophical Transactions of the Royal Society A, 2011(369), pp.2892~2919 (2011)
- 이병혁, "받음각을 갖는 평판의 유체 충격 시뮬레이션", 대한조선학회 논문집, 45(1), pp.1~9 (2008), 대한조선학회
- Muzaferija, S., "A two-fluid Navier-Stokes solver to simulate water entry", Proceedings of 22nd Symposium on Naval Hydrodynamics, pp.638~651 (2000)
- "Research on flare slamming of a large container ship. NK Class research report" (2004)[URL]
- Ochi, M.K., "Prediction of Slamming Characteristics and Hull Responses for Ship Design", Transaction of SNAME, 81, pp.144~176 (1973)
- 찬후피, "CFD 기반 유체충격 해석에서 공기 압축성 효과", 대한조선학회 논문집, 48(6), pp.581~591 (2011), 대한조선학회
- The impact on sea plane floats during landing, "Von Karman, T.", ~, pp.Technical report, NACA TN 321 (1929)
- Wagner, H., "UberStoss-und Gleitvorgange and der Oberflache von Flussigkeiten", Zeitschr. F. AngewandteMathematik und Mechanik(ZAMM), 12(4), pp.192~235 (1932)
- 염덕준, "2차원 쐐기형 구조물의 슬래밍 현상에 대한 수치 유동해석", 대한조선학회 논문집, 45(5), pp.477~486 (2008), 대한조선학회
- Zhao, R., "Water Entry of Two Dimensional Bodies", Journal of Fluid Mechanics, 246, pp.593~612 (1993)
- Zhao, R., "Water entry of arbitrary two-dimensional sections with and without flow separation", Proceedings of 21st Symposium on Naval Hydrodynamics, pp.408~423 (1996)