멕조인트를 이용한 다관절 로봇핸드 설계
Design of a Humanoid Robot-hand with MEC-Joint
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
A humanoid robot hand with one thumb and two fingers has been developed. Each finger has the specially designed compact joints, called "MEC Joint", which convert the rotation of a motor to the swing motion of a pendulum. The robot hand with the MEC Joints is compact and relatively light but strong enough to grasp objects in the same manner as human being does in daily activities. In this paper the kinematic model and the torque characteristics of the MEC Joint are presented and compared with the results of the dynamic simulation and the dynamometer test. The dynamic behavior of the thumb and two fingers with MEC Joints are also presented by computer simulation.
Abstract
A humanoid robot hand with one thumb and two fingers has been developed. Each finger has the specially designed compact joints, called "MEC Joint", which convert the rotation of a motor to the swing motion of a pendulum. The robot hand with the MEC Joints is compact and relatively light but strong enough to grasp objects in the same manner as human being does in daily activities. In this paper the kinematic model and the torque characteristics of the MEC Joint are presented and compared with the results of the dynamic simulation and the dynamometer test. The dynamic behavior of the thumb and two fingers with MEC Joints are also presented by computer simulation.
참고문헌 (16)
- Jacobsen, S., "Design of the Utah", M.I.T. Dextrous Hand, 1986, 1520~1532
- J. Butterfass, "DLR-Hand II: Next Generation of a Dextrous Robot Hand", Proceedings of the IEEE International Conference on Robotics and Automation, pp.109~114 (2001)
- T. B. Martin, "Tactile Gloves for Autonomous Grasping with the NASA", DARPA Robonaut, 2004, ~
- H. kawasaki, "Anthropomorphic Robot Hand: Gigu Hand III", Int. conf. on Control, Automation, and Systems, pp.1288~1293 (2002)
- Haruhisa Kawasaki, "Dexterous Anthropomorphic Robot Hand With Distributed Tactile Sensor: Gifu Hand II", IEEE, 2002, pp.7(3), 296~303
- B.‐H. Kim, "Independent finger and independent joint‐basedcompliance control of multifingered robot hands", IEEE Trans. Robotics and Automation, 19(2), pp.185~199 (2003)
- S.‐I. An, "Design of a Humanoids Specific Anthropomorphic Robot Hand by Imitating Human Finger's Motion", URAI 2007 (2007)
- 이석원, "병렬 구동 인체 모방형 로봇 핸드의 개발과 제어", 석사, 기계공학, pp.2010
- 천주영, "인간형 다지 다관절 로봇 핸드의 개발", 로봇학회 논문지, 5(2), pp.102~109 (2010), 한국로봇학회
- K. DeLaurentis, "Development of a shape memory alloy actuatedhand", Proc. 7th Int. Conf. New Actuators, pp.281~284 (2000)
- 이민규, "정밀한 파지를 할 수 있는 로봇손의 안정성평가", 한국소음진동공학회 추계학술대회논문집 (2007)
- V. Agrawal, "Modeling of a closed loop cableconduit transmission system", Proc. of IEEE Int. Conf. on Robotics and Automation, 3407(3412) (2008)
- Y. Kurita, "NAIST Hand 2: Human-sized Anthropomorphic Robot hand with Detachable mechanism at the Wrist", The 2009 IEEE, 2009, 2271~2276
- I. I. Artobolevsky, "Mechanisms in Modern Engineering Design: Vol. 1. Lever Mechanisms", pp.373~ (1979), MIR Publishers Moscow
- 안상익, "인간손의 동작과 모양을모방한 휴머노이드 로봇손 설계", 제어·로봇·시스템확회 논문집, 14(1), pp.62~69 (2008)