여유자유도를 가지는 인간형 로봇 손의 자세 및 힘 제어
Force and Pose control for Anthropomorphic Robotic Hand with Redundancy
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The versatility of a human hand is what the researchers eager to mimic. As one of the attempt, the redundant degree of freedom in the human hand is considered. However, in the force domain the redundant joint causes a control issue. To solve this problem, the force control method for a redundant robotic hand which is similar to the human is proposed. First, the redundancy of the human hand is analyzed. Then, to resolve the redundancy in force domain, the artificial minimum energy point is specified and the restoring force is used to control the configuration of the finger other than the force in a null space. Finally, the method is verified experimentally with a commercial robot hand, called Allegro Hand with a force/torque sensor.
Abstract
The versatility of a human hand is what the researchers eager to mimic. As one of the attempt, the redundant degree of freedom in the human hand is considered. However, in the force domain the redundant joint causes a control issue. To solve this problem, the force control method for a redundant robotic hand which is similar to the human is proposed. First, the redundancy of the human hand is analyzed. Then, to resolve the redundancy in force domain, the artificial minimum energy point is specified and the restoring force is used to control the configuration of the finger other than the force in a null space. Finally, the method is verified experimentally with a commercial robot hand, called Allegro Hand with a force/torque sensor.
참고문헌 (12)
- M. Grebenstein, "Antagonistically driven finger design for the anthropomorphic DLR Hand Ann System", IEEE-RAS Int. Conf. on Humanoid Robotics, pp.609~616 (2010)
- 천주영, "인간형 다지 다관절 로봇 핸드의 개발", 로봇학회 논문지, 5(2), pp.102~109 (2010), 한국로봇학회
- Ma, Raymond R., "A modular, open-source 3d printed underactuated hand", Proc. IEEE Int. Conf. Robotics and Automation, pp.2737~2743 (2013)
- L. U. Odhner, "A compliant, underactuated hand for robust manipulation", Int. J. of Robo. Res., 33(5), pp.736~757 (2014)
- 유홍선, "와이어 기반의 적응형 로봇 핸드", 로봇학회 논문지, 9(4), pp.258~263 (2014), 한국로봇학회[DOI]
- M. Cutkosky, "On Grasp Choice, Grasp Models, and the Design of hands for manufacturing tasks", IEEE Treans. Robotics and Automation (1989)
- J. Hollerbach, "Redundancy resolution of manipulators through torque optimization", IEEE J. Robot. Autom., (4) (1987)
- J. Bae, "Robotic arm control inspired by human muscle tension effect under the gravity", Proc. Int. Com. Robotics and Automation, pp.1404~1411 (2011)
- 권우영, "힘과 위치를 동시에 고려한 양팔 물체 조작 솜씨의 모방학습", 로봇학회 논문지, 8(1), pp.20~28 (2013), 한국로봇학회[DOI]
- O. Khatib, "A Unified Approach for Motion and Force Control of Robot manipulators", IEEE J. Robot. Autom., RA-3 (1987)
- B. Nemec, "Force control of redundant robots in unstructured environment", IEEE Trans. Ind. Electron., 49(1), pp.233~240 (2002)
- Park, S., "Development of an anthropomorphic robot hand aimed at practical use for wide service robot application", Proc. IEEE Int. Conf. Automation Science and Engineering (2014)