보행 재활 로봇 개발을 위한 1자유도 무릎 관절 설계
Design of an 1 DOF Assistive Knee Joint for a Gait Rehabilitation Robot
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
One of the important issues for structural and electrical specifications in developing a robot is to determine lengths of links and motor specifications, which need to be appropriate to the purpose of robot. These issues become more critical for a gait rehabilitation robot, since a patient wears the robot. Prior to developing an entire gait rehabilitation robot, designing of a 1DOF assistive knee joint of the robot is considered in this paper. Human gait motions were used to determine an allowable range of knee joint that was rotated with a linear type actuator (ball-screw type) and links. The lengths of each link were determined by using an optimization process, minimizing the stroke of actuator and the total energy (kinetic and potential energy). Kinetic analysis was performed in order to determine maximum rotational speed and maximum torque of the motor for tracking gait trajectory properly. The prototype of 1 DOF assistive knee joint was built and examined with a impedance controller.
Abstract
One of the important issues for structural and electrical specifications in developing a robot is to determine lengths of links and motor specifications, which need to be appropriate to the purpose of robot. These issues become more critical for a gait rehabilitation robot, since a patient wears the robot. Prior to developing an entire gait rehabilitation robot, designing of a 1DOF assistive knee joint of the robot is considered in this paper. Human gait motions were used to determine an allowable range of knee joint that was rotated with a linear type actuator (ball-screw type) and links. The lengths of each link were determined by using an optimization process, minimizing the stroke of actuator and the total energy (kinetic and potential energy). Kinetic analysis was performed in order to determine maximum rotational speed and maximum torque of the motor for tracking gait trajectory properly. The prototype of 1 DOF assistive knee joint was built and examined with a impedance controller.
참고문헌 (17)
- 최형식, "배관 검사 및 청소 로봇의 개발", 한국마린엔지니어링학회지, 33(5), pp.662~671 (2009), 한국마린엔지니어링학회
- 박찬훈, "산업용 양팔로봇의 설계 및 제어", 한국정밀공학회지, 25(11), pp.58~65 (2008), 한국정밀공학회
- Ozer Unluhisarcikli, "Design and Control of a Robotic Lower Extremity Exoskeleton for Gait Rehabilitation", 2011 IEEE, 2011, 25~30
- Ping Wang, "Synchronized Walking Coordination for Impact-less Footpad Contact of an Overground Gait Rehabilitation System : NaTUre-gaits", 2011 IEEE International Conference on Rehabilitation Robotics Rehab Week Zurich (2011)
- Jan F. Veneman, "Design and Evaluation of the LOPES Exoskeleton Robot for Interactive Gait Rehabilitation", IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING, 15(3) (2007)
- Sai K. Banala, "Robot Assisted Gait Training With Active Leg Exoskeleton (ALEX)", IEEE Transactions on Neural System and Rehabilitation Engineering, 17(1) (2009)
- Kyle N. Winfree, "Design of a Minimally Constraining, Passively Supported Fait Training Exoskeleton: ALEX Ⅱ", 2011 IEEE International Conference on Rehabilitation Robotics Rehab Week Zurich (2011)
- Alexander Duschau-Wicke, "Path Control: A Method for Patient-Cooperative Robot-Aided Gait Rehabilitation", IEEE Transactions on Neural System and Rehabilitation Engineering, 18(1) (2010)
- Donald A. Neumann, "Kinesiology of the Musculoskeletal system Foundations for physical rehabilitation", Mosby
- Donald A. Neumann, "KINESIOLOGY of the MUSCULOSKELETAL SYSTEM, Foundations for Physical Rehabilitation", pp.557~, Mosby
- David A. winters, "Biomechanics and motor control of human movement" (2009), WILEY
- 이기상, "익형의 형상최적화를 통한 고효율 축류송풍기 설계", 한국유체기계학회 논문집, 11(2), pp.46~54 (2008), 한국유체기계학회
- THK, "Ball Screw THK General Catalog", A15.49~A15.60
- Adam B. Zoss, "Biomechanical Design of the Berkeley Lower Extremity Exoskeleton (BLEEX)", IEEE, 2006, pp.11(2), ~
- Andrew Chu, "On the Biomimetic Design of the Berkeley Lower Extremity Exoskeleton (BLEEX)", IEEE International Conference on Robotics and Automation Barcelona (2005)
- Erhan Akdoğan, "The design and control of a therapeutic exercise robot for lower limb rehabilitation Physiotherabot", Mechatronics, 21, pp.509~522 (2011)
- Kyu-Jung Kim, "Conceptualization of an exoskeleton Continuous Passive Motion(CPM) device using a link structure", 2011 IEEE International conference on Rehabilitation Robotics Rehab Week Zurich (2011)