다자유도 수동식 중력보상장치 기반의 6자유도 산업용 로봇
6 DOF Industrial Robot Based on Multi-DOF Counterbalance Mechanism
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Static balance of an articulated robot arm at various configurations requires a torque compensating for the gravitational torque of each joint due to the robot mass. Such compensation torque can be provided by a spring-based counterbalance mechanism. However, simple installation of a counterbalance mechanism at each pitch joint does not work because the gravitational torque at each joint is dependent on other joints. In this paper, a 6 DOF industrial robot arm based on the parallelogram for multi-DOF counterbalancing is proposed to cope with this problem. Two passive counterbalance mechanisms are applied to pitch joints, which reduces the required torque at each joint by compensating the gravitational torque. The performance of this mechanism is evaluated experimentally.
Abstract
Static balance of an articulated robot arm at various configurations requires a torque compensating for the gravitational torque of each joint due to the robot mass. Such compensation torque can be provided by a spring-based counterbalance mechanism. However, simple installation of a counterbalance mechanism at each pitch joint does not work because the gravitational torque at each joint is dependent on other joints. In this paper, a 6 DOF industrial robot arm based on the parallelogram for multi-DOF counterbalancing is proposed to cope with this problem. Two passive counterbalance mechanisms are applied to pitch joints, which reduces the required torque at each joint by compensating the gravitational torque. The performance of this mechanism is evaluated experimentally.
참고문헌 (9)
- Q. Lu, "Passive Gravity Compensation Mechanisms : Technologies and Applications", Recent Patents on Engineering, 5(1), pp.32~44 (2011)
- T. Rahman, "A Simple Technique to Passively Gravity-Balance Articulated Mechanisms", Journal of Mechanical Design, 117(4), pp.655~658 (1995)
- 송재복, "기어유닛 기반 중력보상장치를 갖는 머니퓰레이터", 대한기계학회논문집 A, 38(3), pp.289~294 (2014), 대한기계학회
- T. Wongratanaphisan, "Gravity Compensation of Spatial Two-DOF Serial Manipulators", Journal of Robotic Systems, 19(7), pp.329~347 (2002)
- S. K. Agrawal, "Gravity-Balancing of Spatial Robotic Manipulators", National Conference on Machines and Mechanisms, 39(12), pp.1331~1344 (2003)
- A. Fattah, "Gravity-Balancing of Classes of Industrial Robots", IEEE Int. Conf. on Robotics and Automation, pp.2872~2877 (2006)
- N. Ulrich, "Passive Mechanical Gravity Compensation for Robot Manipulators", IEEE Int. Conf. on Robotics and Automation, pp.1536~1541 (1991)
- G. Endo, "A Passive Weight Compensation Mechanism with a Non-Circular Pulley and a Spring", IEEE Int. Conf. on Robotics and Automation, pp.3843~3848 (2010)
- H. S. Kim, "Low-cost robot arm with 3-DOF counterbalance mechanism", IEEE Int. Conf. on Robotics and Automation, pp.4168~4173 (2013)