기계식 중력보상 기반의 가정용 5자유도 로봇 팔
5 DOF Home Robot Arm based on Counterbalance Mechanism
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Home robot arms require a payload of 2 kg to perform various household tasks; at the same time, they should be operated by low-capacity motors and low-cost speed reducers to ensure reasonable product cost. Furthermore, as robot arms on mobile platforms are battery-driven, their energy efficiency should be very high. To satisfy these requirements, we designed a lightweight counterbalance mechanism (CBM) based on a spring and a wire and developed a home robot arm with five degrees of freedom (DOF) based on this CBM. The CBM compensates for gravitational torques applied to the two pitch joints that are most affected by the robot’s weight. The developed counterbalance robot adopts a belt-pulley based parallelogram mechanism for 2-DOF gravity compensation. Experiments using this robot demonstrate that the CBM allows the robot to meet the above-mentioned requirements, even with low-capacity motors and speed reducers.
Abstract
Home robot arms require a payload of 2 kg to perform various household tasks; at the same time, they should be operated by low-capacity motors and low-cost speed reducers to ensure reasonable product cost. Furthermore, as robot arms on mobile platforms are battery-driven, their energy efficiency should be very high. To satisfy these requirements, we designed a lightweight counterbalance mechanism (CBM) based on a spring and a wire and developed a home robot arm with five degrees of freedom (DOF) based on this CBM. The CBM compensates for gravitational torques applied to the two pitch joints that are most affected by the robot’s weight. The developed counterbalance robot adopts a belt-pulley based parallelogram mechanism for 2-DOF gravity compensation. Experiments using this robot demonstrate that the CBM allows the robot to meet the above-mentioned requirements, even with low-capacity motors and speed reducers.
참고문헌 (10)
- H. Qian, "Household Service Robotics, ch. 2, sec. 1", pp.19~34 (2014), Academic Press
- S. -J. Lee, "Novel Design and Control of a Home Service Robot for Korean Floor-Living Life Style : KOBOKER", 2011 8th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), pp.863~867 (2011)
- T. Nakayama, "A new gravity compensation mechanism for lower limb rehabilitation", 2009International Conference on Mechatronics and Automation, pp.943~948 (2009)
- C. Cho W. Lee, "Static balancing of manipulator with hemispherical workspace", 2010 IEEE, 2010, 1269~1274
- H. -S. Kim, "Multi-DOF Counterbalance Mechanism for a Service Robot Arm", IEEE, 2014, pp.19(6), 1756~1763
- H. -S. Kim, "Multiple Degree of Freedom Counterbalance Robot Arm Based on Slider-Crank Mechanism and Bevel Gear Units", IEEE Transactions on Robotics, 32(1), pp.230~235 (2016)
- B. -Y. Moon, "Development of counterbalance mechanism and robot manipulator applicable to complex joints", M.S., Dept. Mechatronics, pp.2018
- 엄윤설, "효과적으로 기부를 받기 위한 인간형 로봇의 외형 디자인 및 행동에 관한 연구", 로봇학회 논문지, 14(3), pp.163~169 (2019), 한국로봇학회[DOI]
- 양영하, "보틀플리핑의 로봇 강화학습을 위한 효과적인 보상 함수의 설계", 로봇학회 논문지, 14(2), pp.081~086 (2019), 한국로봇학회[DOI]
- D. Paulius, "A Survey of Knowledge Representation in Service Robot", Robotics and Autonomous System, 118, pp.13~30 (2019)