Comparison of Microleakage and Compressive Strength of Different Base Materials
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This study compared the microleakages and compressive strengths of various base materials. To evaluate microleakages, 50 extracted permanent premolars were prepared. The teeth divided into 5 groups of 10 each according to the base materials. Cavities with a 5.0 mm width, 3.0 mm length, and 3.0 mm depth were formed on the buccal surfaces of the teeth. After filling the cavities with different base materials, a composite resin was used for final restoration. Each specimen was immersed in 2% methylene blue solution and then observed under a stereoscopic microscope (× 30). To evaluate the compressive strength, 5 cylindrical specimens were prepared for each base material. A universal testing machine was used to measure the compressive strength. The microleakage was highest in the Riva light cureTM group and lowest in the BiodentineTM and Well-RootTM PT groups. For the compressive strengths, in all groups, acceptable strength values for base materials were found. The highest compressive strength was observed in the Fuji II LCTM group and the lowest strength in the Well-RootTM PT group.
Abstract
This study compared the microleakages and compressive strengths of various base materials. To evaluate microleakages, 50 extracted permanent premolars were prepared. The teeth divided into 5 groups of 10 each according to the base materials. Cavities with a 5.0 mm width, 3.0 mm length, and 3.0 mm depth were formed on the buccal surfaces of the teeth. After filling the cavities with different base materials, a composite resin was used for final restoration. Each specimen was immersed in 2% methylene blue solution and then observed under a stereoscopic microscope (× 30). To evaluate the compressive strength, 5 cylindrical specimens were prepared for each base material. A universal testing machine was used to measure the compressive strength. The microleakage was highest in the Riva light cureTM group and lowest in the BiodentineTM and Well-RootTM PT groups. For the compressive strengths, in all groups, acceptable strength values for base materials were found. The highest compressive strength was observed in the Fuji II LCTM group and the lowest strength in the Well-RootTM PT group.
참고문헌 (19)
- Weiner RS, "Liners, bases, and cements : a solid foundation", Gen Dent, 50, pp.442~446 (2002)
- Anusavice K, "Phillip’s Science of Dental Materials" (2003), WB Saunders
- Ferracane JL, "Materials in dentistry: principles and applications" (2001), Lippincott Williams and Wilkins
- Craig RG, "Restorative dental materials" (2002), Mosby
- Masih S, "Comparative evaluation of the microleakage of two modified glass ionomer cements on primary molars. an in vivo study", J Indian Soc Pedod Prev Dent, 29, pp.135~139 (2011)
- Ragu VG, "Comparative evaluation of shear bond strength and microleakage of tricalcium silicate-based restorative material and radiopaque posterior glass ionomer restorative cement in primary and permanent teeth : An in vitro study", J Indian Soc Pedod Prev Dent, 32, pp.304~310 (2014)
- Samuel A, "Evaluation of sealing ability of BiodentineTM and mineral trioxide aggregate in primary molars using scanning electron microscope : A randomized controlled in vitro trial", Comtemp Clin Dent, 7, pp.322~325 (2016)
- Noh YS, "Mechanical properties and microstructure analysis of mineral trioxide aggregate mixed with hydrophilic synthetic polymer", J Biomed Mater Res B Appl Biomater, 103, pp.777~782 (2015)
- Butt N, "Comparison of physical and mechanical properties of mineral trioxide aggregate and Biodentine", Indian J Dent Res, 25, pp.692~697 (2014)
- Nomoto R, "Effect of mixing method on the porosity of encapsulated glass-ionomer cement", Dent Mater, 20, pp.972~978 (2004)
- Nekoofar MH, "The effect of various mixing technique on the surface microhardness of mineral trioxide aggregate", Int Endod J, 43, pp.312~320 (2010)
- Mitchell CA, "Comparison of the porosity of hand-mixed and capsulated glass-ionomer luting cements", Biomater, 18, pp.1127~1131 (1997)
- Kayahan MB, "Effect of acid etching procedures on the compressive strength of 4 calcium silicate-based endodontic cements", J Endod, 39, pp.1646~1648 (2013)
- International Organization for Standardization, "Dentistry-Zinc oxide", eugenol cements and zinc oxide, ISO 3107, pp.2011, ~
- International Organization for Standardization, "Dentistry-Water-based cements-Part 1: Powder", liquid acid-base cements, 2007
- Govindaraju L, "Effect of root canal irrigating solutions on the compressive strength of tricalcium silicate cements", Clin Oral Investig, 21, pp.567~571 (2017)
- Nomoto R, "Effect of mixing methods on the compressive strength of glass ionomer cements", J Dent, 29, pp.205~210 (2001)
- Grech L, "Investigation of the physical properties of tricalcium silicate cement-based root-end filling materials", Dent Mater, 29, pp.20~28 (2013)
- Camilleri J, "Investigation of the hydration and bioactivity of radiopacified tricalcium silicate cement, Biodentine and MTA angelus", Dent Mater, 29, pp.580~593 (2013)