Electrochemical properties of Ni-Mn hydroxide and carbon cryogel composite electrodes for supercapacitors
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The Ni-Mn hydroxide/carbon cryogel (20 to 80 wt%) composite electrodes were synthesized by freeze-drying to improve electrochemical properties of the Ni-Mn hydroxide. XRD results revealed that the composite electrode showed a distorted spinel-like structure similar to the Ni-Mn hydroxide plus the graphitized carbon. The crystallinity of carbon cryogel in composite electrode was improved dramatically with increasing the carbon cryogel content. The presence of the carbon cryogel played a significant role in inhibiting the crystal growth of Ni-Mn hydroxide on the surface of carbon cryogel. Electrochemical properties of the composite electrodes, such as capacitance, power density, and energy density, were observed to be always higher than those of the Ni-Mn electrodes. The highest specific capacitance of 221 F/g was observed for the electrodes containing 20 wt% of carbon cryogel at a scan rate of 5 mV/s and an electrode loading amount of 15 mg/cm2 due to easy transport of the ions into pores. However, the highest energy density of 10.8 Wh/kg and power density of 927 W/kg were observed for the composite electrodes containing 80 wt% of carbon cryogel. Experimental results suggested that tunable electrochemical properties of the composite electrodes can be adjusted by varying the carbon cryogel content.
Abstract
The Ni-Mn hydroxide/carbon cryogel (20 to 80 wt%) composite electrodes were synthesized by freeze-drying to improve electrochemical properties of the Ni-Mn hydroxide. XRD results revealed that the composite electrode showed a distorted spinel-like structure similar to the Ni-Mn hydroxide plus the graphitized carbon. The crystallinity of carbon cryogel in composite electrode was improved dramatically with increasing the carbon cryogel content. The presence of the carbon cryogel played a significant role in inhibiting the crystal growth of Ni-Mn hydroxide on the surface of carbon cryogel. Electrochemical properties of the composite electrodes, such as capacitance, power density, and energy density, were observed to be always higher than those of the Ni-Mn electrodes. The highest specific capacitance of 221 F/g was observed for the electrodes containing 20 wt% of carbon cryogel at a scan rate of 5 mV/s and an electrode loading amount of 15 mg/cm2 due to easy transport of the ions into pores. However, the highest energy density of 10.8 Wh/kg and power density of 927 W/kg were observed for the composite electrodes containing 80 wt% of carbon cryogel. Experimental results suggested that tunable electrochemical properties of the composite electrodes can be adjusted by varying the carbon cryogel content.
참고문헌 (23)
- J. R. Miller, , Science, 321(5889), pp.651~652 (2008)
- G. Wang, , Chem. Soc. Rev, 41(2), pp.797~828 (2012)
- A. M. Saleem, , J. Nanomater, 2016, pp.1537269~ (2016)
- O.A. Shlyakhtin, , Electrochim. Acta, 50(2-3), pp.511~516 (2004)
- O. A. Shlyakhtin, , J. Electroceram, 23, pp.452~461 (2009)
- 송민섭, "Preparation and Electrochemical Properties of Carbon Cryogel for Supercapacitor", 한국세라믹학회지, 45(11), pp.662~666 (2008), 한국세라믹학회
- Nanasaheb M. Shinde, "An Overview of Self-Grown Nanostructured Electrode Materials in Electrochemical Supercapacitors", 한국세라믹학회지, 55(5), pp.407~418 (2018), 한국세라믹학회
- O. A. Shlyakhtin, , Mater. Lett, 63(1), pp.109~112 (2009)
- J. Cao, , J. Sol-gel Sci. Technol, 85, pp.629~637 (2018)
- 정명선, "금속 전극 알루미나 박막 캐패시터의 전기적 특성에 미치는 미세구조의 영향", 한국재료학회지, 21(6), pp.309~313 (2011), 한국재료학회
- O. A. Shlyakhtin, , Mater. Lett, 63(1), pp.109~112 (2009)
- J. L. Figueiredo, , J. Sol-gel Sci. Technol, 89, pp.12~20 (2019)
- 민형섭, "탄소 전극 형상 변화에 따른 전기화학 커패시터 특성 향상", 한국재료학회지, 19(10), pp.544~549 (2009), 한국재료학회
- J. Y. Hwang, , Adv. Funct. Mater, 27, pp.1605745~ (2017)
- S. Ramesh, , J. Alloy Comp, 794, pp.186~194 (2019)
- Jayaraman Theerthagiri, "Recent advances in 2-D nanostructured metal nitrides, carbides, and phosphides electrodes for electrochemical supercapacitors – A brief review", Journal of Industrial and Engineering Chemistry, 67, pp.12~27 (2018), 한국공업화학회[DOI]
- J. Y. Hwang, , Nano Energy, 18, pp.57~70 (2015)
- S. Chun, , Nat. Commun, 6, pp.7818~ (2015)
- Y. Shao, , Chem. Rev, 118, pp.9233~9280 (2018)
- M. F. El-Kady, , ACS Nano, 8, pp.8725~8729 (2014)
- 김예나, "Effect of PEG Addition on Pore Morphology and Biocompatibility of PLLA Scaffolds Prepared by Freeze Drying", Biomedical Engineering Letters (BMEL), 6(4), pp.287~295 (2016), 대한의용생체공학회[DOI]
- O. A. Shlyakhtin, , Electrochim. Acta, 50, pp.505~509 (2004)
- X. Wang, , J. Power Sources, 140, pp.211~215 (2005)