Processing, microstructure and mechanical properties of porous silicon nitride by a slip casting method using petroleum coke as pore former
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, porous Si3N4 ceramics were obtained by a slip casting method which would be easier applied in industry. The most stable and dispersing aqueous suspension was obtained from a solid slurry content of 56.2%, a carboxymethyl cellulose concentration of 0.3% as the adhesive and 0.05% glycerol as the defoamer. Petroleum coke was used as pore-former, and at the same time, it was helpful for the stability of the suspension. The burning-out of the petroleum coke seemed to be an economical way for increasing the porosity of porous Si3N4. After sintering at 1,800℃ for 2 h, samples with a pore size about 10 μm, porosities of 45-60%, and flexural strength of 52.0-112.1MPa were obtained.
Abstract
In this study, porous Si3N4 ceramics were obtained by a slip casting method which would be easier applied in industry. The most stable and dispersing aqueous suspension was obtained from a solid slurry content of 56.2%, a carboxymethyl cellulose concentration of 0.3% as the adhesive and 0.05% glycerol as the defoamer. Petroleum coke was used as pore-former, and at the same time, it was helpful for the stability of the suspension. The burning-out of the petroleum coke seemed to be an economical way for increasing the porosity of porous Si3N4. After sintering at 1,800℃ for 2 h, samples with a pore size about 10 μm, porosities of 45-60%, and flexural strength of 52.0-112.1MPa were obtained.
참고문헌 (7)
- S.-Q. Li, , Ceram. int, 32, pp.701~705 (2006)
- M. Maeda, , J. Ceram. Soc. Jpn, 105, pp.1155~1158 (1997)
- O. Penas, , Ceram. int, 27, pp.591~596 (2001)
- J.-F. Yang, , Key Eng. Mater, 280, pp.1231~1236 (2005)
- R.L. Coble, , J. Am. Ceram. Soc, 39, pp.377~ (1956)
- T. Kawashima, , J. Ceram. Soc. Jpn, 99, pp.320~323 (1997)
- B.T. Lee, , Mater Lett, 61, pp.2182~2186 (2007)