Fracture behavior of nuclear grade graphite under mixed mode I-II
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Mixed mode I and mode II fracture toughness values of five grades of nuclear graphites were measured at room temperature using a centrally notched disk specimen. The specimens were compressed diametrically with a crosshead speed of 0.125 mm/ min in ambient air. The fracture loads of the nuclear graphites decreased as the notch inclination angle increased under mixed mode I-II loading. The nuclear grade graphites with the higher bulk density and coarser coke particles showed higher mode I and mode II fracture toughness. The ratios of KIIc/KIc were in the range of 1.4 ~ 1.5 regardless of the coke type and size
Abstract
Mixed mode I and mode II fracture toughness values of five grades of nuclear graphites were measured at room temperature using a centrally notched disk specimen. The specimens were compressed diametrically with a crosshead speed of 0.125 mm/ min in ambient air. The fracture loads of the nuclear graphites decreased as the notch inclination angle increased under mixed mode I-II loading. The nuclear grade graphites with the higher bulk density and coarser coke particles showed higher mode I and mode II fracture toughness. The ratios of KIIc/KIc were in the range of 1.4 ~ 1.5 regardless of the coke type and size
참고문헌 (10)
- "ASTM D 7219-08, Standard Specification for Isotropic and Near-isotropic Nuclear Graphites", Annual book of ASTM Standards, ~ (2009)
- "ASTM D 7301-08. Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose", Annual book of ASTM Standards, ~ (2009)
- T. Iyoku, , Nucl. Eng. Deg, 132, pp.23~ (1991)
- T. Shibata, "JAEA-Research 2009-042", ~
- C. Atkinson, , Int. J. Frac, 18, pp.279~ (1982)
- T. Burchell, , Proceeding of 3rd International Topical Meeting on High Temperature Reactor Technology (2006)
- E.S. Kim, , Proceeding of Carbon 2010
- M. Ishihara, , Tanso, 117, pp.124~ (1984)
- S. Sato, , Nucl. Eng. Deg, 103, pp.291~ (1987)
- M. Li, , Carbon, 37(10), pp.1633~ (1999)