Experimental measurement of stiffness coefficient of high-temperature graphite pebble fuel elements in helium at high temperatures
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Graphite material plays an important role in nuclear reactors especially the high-temperature gas-cooled reactors (HTGRs) by its outstanding comprehensive nuclear properties. The structural integrity of graphite pebble fuel elements is the first barrier to core safety under any circumstances. The correct knowledge of the stiffness coefficient of the graphite pebble fuel element inside the reactor’s core is significant to ensure the valid design and inherent safety. In this research, a vertical extrusion device was set up to measure the stiffness coefficient of the graphite pebble fuel element by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University in China. The stiffness coefficient equations of graphite pebble fuel elements at different temperatures are given (in a helium atmosphere). The result first provides the data on the high-temperature stiffness coefficient of pebbles in helium gas. The result will be helpful for the engineering safety analysis of pebble-bed nuclear reactors.
Abstract
Graphite material plays an important role in nuclear reactors especially the high-temperature gas-cooled reactors (HTGRs) by its outstanding comprehensive nuclear properties. The structural integrity of graphite pebble fuel elements is the first barrier to core safety under any circumstances. The correct knowledge of the stiffness coefficient of the graphite pebble fuel element inside the reactor’s core is significant to ensure the valid design and inherent safety. In this research, a vertical extrusion device was set up to measure the stiffness coefficient of the graphite pebble fuel element by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University in China. The stiffness coefficient equations of graphite pebble fuel elements at different temperatures are given (in a helium atmosphere). The result first provides the data on the high-temperature stiffness coefficient of pebbles in helium gas. The result will be helpful for the engineering safety analysis of pebble-bed nuclear reactors.
참고문헌 (25)
- A. Koster, "Pebble-bed modular reactor: a generation IV high-temperature gas-cooled reactor", Proc. Inst. Mech. Eng. A J. Power Energy (2004)
- H. Wu, "Parameter analysis and wall effect of radiative heat transfer for CFD-DEM simulation in nuclear packed pebble bed", Exp. Computat. Multiphase Flow, 3, pp.250~257 (2021)
- Z. Wu, "The design features of the HTR-10", Nucl. Eng. Des, 218(1), pp.25~32 (2002)
- Current Status and Future Development of Modular High Temperature Gas Cooled Reactor Technology, "I.A.E. Agency", International Atomic Energy Agency, 1~268 (2001)
- Z. Zhang, "Future HTGR developments in China after the criticality of the HTR-10", Nucl. Eng. Des, 218(1–3), pp.249~257 (2002)
- Z. Zhang, "The shandong Shidao Bay 200 MWe hightemperature gas-cooled reactor pebble-bed module(HTR-PM)demonstration power plant : an engineering and technological innovation", Engineering, 2(1), pp.112~118 (2016)
- Z. Zhang, "Current status and technical description of Chinese 2 x 250 MWth HTR-PM demonstration plant", Nucl. Eng. Des, 239(7), pp.1212~1219 (2009)
- R. E. Nightingale, "Nuclear graphite" (1962), Nuclear graphite
- T. Korkut, "A molecular dynamics study about graphite and boron coated graphite at reactor temperatures", Ann. Nucl. Energy, 63, pp.100~106 (2014)
- Z. Xiangwen, "Preparation of spherical fuel elements for HTR-PM in INET", Nucl. Eng. Des, 263, pp.456~461 (2013)
- C. Tang, "Design and manufacture of the fuel element for the 10 MW high temperature gas-cooled reactor", Nucl. Eng. Des, 218(1), pp.91~102 (2002)
- Y. Yang, "Fuel management of the HTR-10 including the equilibrium state and the running-in phase", Nucl. Eng. Des, 218(1), pp.33~41 (2002)
- X. Zhou, "Nuclear graphite for high temperature gas-cooled reactors", N. Carbon Mater, 32(3), pp.193~204 (2017)
- Z. Zhang, "Design aspects of the Chinese modular hightemperature gas-cooled reactor HTR-PM", Nucl. Eng. Des, 236(5–6), pp.485~490 (2006)
- Z. Zhang, "Economic potential of modular reactor nuclear power plants based on the Chinese HTR-PM project", Nucl. Eng. Des, 237(23), pp.2265~2274 (2007)
- X. W. Zhou, "Carbon materials in a high temperature gascooled reactor pebble-bed module", N. Carbon Mater, 33(2), pp.97~108 (2018)
- J. Zhang, "Study on Probabilistic Safety Goals for Multimodule High-Temperature Gas-Cooled Reactor Based on Chinese Societal Risks", Science and Technology of Nuclear Installations (2021)
- S. Timoshenko, "History of Strength of Materials: with a Brief Account of the History of Theory of Elasticity and Theory of Structures" (1983), Courier Corporation
- A. Samuelsson, "History of the stiffness method", Int. J. Numer. Methods Eng, 67(2), pp.149~157 (2006)
- A. Halyavkin, "Determination of stiffness coefficient of stern shaft bearing", IOP Conf. Ser.: Earth Environ. Sci., 90(1), pp.012078~ (2017), IOP Publ
- Z. P. Baˇzant, "Size effect on structural strength : a review", Arch. Appl. Mech, 69, pp.703~725 (1999), Springer
- Z. P. Bazant, "Scaling of structural strength", Appl. Mech. Rev, 56(5), pp.B70~B72 (2003)
- W. Xu, "The influence of nuclear graphite oxidation on air ingress accident of HTR-PM", Ann. Nucl. Energy, 110, pp.1242~1248 (2017)
- H. Hertz, "On the contact of solid elastic bodies and on hardness", J. Math, 92, pp.156~171 (1881)
- Recent Advances on Microstructural Characterization and Modeling of Nuclear graphite, "J. Arregui Mena", Oak Ridge National Lab. (ORNL), ~ (2021)