본문 바로가기
KERD
논문KCI 등재

알카자이트 수복재의 색안정성 : 실험실적 연구

Color Stability of Alkasite Restorative Material: in vitro Studies

1

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류치의학

초록

이 연구의 목적은 알카자이트 수복재와 소아치과 영역에서 널리 사용되고 있는 수복재들의 색 안정성을 비교하고, 다양한 음료에서의 색상 변화를 비교하는 것이다. 글라스아이오노머, 레진강화형 글라스아이오노머, 알카자이트 수복재, 복합레진의 시편을 준비하였고, 열순환 후 색 안정성을 측정하였다. 침전 전과 7일, 14일, 21일, 28일 후 CIE L*a*b*값의 색상 변화를 분석하기 위해 각 수복재료의 시편을 5개의 군으로 나누어 각각 PBS, 커피, 녹차, 콜라, 오렌지주스 용액에 침전시켰다. 열순환 후 복합레진에서 가장 높은 색 안정성을 보였고, 알카자이트 수복재, 글라스아이오노머, 레진강화형 글라스아이오노머 순으로 높은 안정성을 보였다. 7일간 다양한 용액에 침전시킨 결과 모든 시편에서 색상 변화가 나타났으며, 알카자이트 수복재는 글라스아이오노머 계열보다 낮은 색상 변화를 보였고, 복합레진보다는 높은 색상 변화를 나타냈다. 알카자이트 수복재는 커피에서 가장 많은 색상 변화가 나타났으며 그 다음은 녹차, 오렌지주스 순이었으나, 콜라와 PBS 용액에서는 침전 28일 이후에도 색상 변화를 거의 보이지 않았다.

Abstract

The purpose of this study is was to compare the color stability of alkasite and other restorative materials commonly used in the field of pediatric dentistry and to study a color change in response to various beverages. Test specimens of glass ionomer, resin modified glass ionomer, alkasite restorative material, and composite resin were prepared, and the color stability was measured after thermocycling. Each specimen was also subdivided into 5 groups and submerged in PBS, coffee, green tea, coke, and orange juice to analyze the color change from the original CIE L *a *b * values after 7, 14, 21, and 28 days. Composite resin showed the best color stability after thermocycling, followed by alkasite restorative material, glass ionomer, and resin modified glass ionomer. Submerging in various beverages for 7 days resulted in color change in all test specimens, with alkasite restorative material showing less color change than glass ionomer but greater change than composite resin. Alkasite restorative material showed the greatest color change in coffee, followed by green tea and orange juice, but almost no change in coke and PBS even after 28 days of submersion.

참고문헌 (50)

  1. Tunc ES, "The effects of children’s drinks on the color stability of various restorative materials", J Clin Pediatr Dent, 34, pp.147~150 (2009)
  2. Majeti C, "Evaluation of the color stability of two different posterior tooth colored restorative materials", F1000Research, 9, pp.1251~1260 (2020)
  3. Nasim I, "Color stability of microfilled, microhybrid and nanocomposite resins-an in vitro study", J Dent, 38(Suppl 2), pp.E137~E142 (2010)
  4. Villalta P, "Effects of staining and bleaching on color change of dental composite resins", J Prosthet Dent, 95, pp.137~142 (2006)
  5. Yazkan B, "Effects of aging on surface roughness and color stability of a novel alkasite in comparison with current direct restorative materials", Oper Dent, 46, pp.E240~E250 (2021)
  6. Savas S, "Color stability, roughness, and water sorption", solubility of glass ionomer-based restorative materials, 2019, pp.22, 824~832
  7. Todd JC, "Scientific documentation" (2016), Cention N. Ivoclar Vivadent Press
  8. 이동연, "수종의 불소함유 수복재의 불소 유리 및 재충전", 대한소아치과학회지, 47(2), pp.196~204 (2020), 대한소아치과학회[DOI]
  9. Poggio C, "Color stability of new esthetic restroative materials : A spectrophotometic analysis", J Funct Biomater, 8, pp.26~ (2017)
  10. 정재은, "The Color Stability of Resin Composite After Exposure to pH Solutions and Immerse Into Staining Beverages", 대한치과재료학회지, 43(2), pp.111~120 (2016), 대한치과재료학회[DOI]
  11. ten Cate JM, "Alternating demineralization and remineralization of artificial enamel lesions", Caries Res, 16, pp.201~210 (1982)
  12. 이건호, "Alkasite와 기존의 수복 재료의 압축강도 및 미세경도 비교", 대한소아치과학회지, 47(3), pp.320~326 (2020), 대한소아치과학회[DOI]
  13. Barga SR, "Reasons for placement and replacement of direct restorative materials in Brazil", Quintessence Int, 38, pp.E189~E194 (2007)
  14. 강성균, "다양한 용액에 따른 Bulk-fill 복합레진의 색조안정성 평가", 대한소아치과학회지, 46(4), pp.353~361 (2019), 대한소아치과학회[DOI]
  15. Barutcigi C, "Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites", J Dent, 40(Suppl 1), pp.E57~E63 (2012)
  16. Erdemir U, "Effects of sportsdrinks on colorstability of nanofilled and micro hybrid composites after long-term immersion", J Dent, 40(Suppl 2), pp.E55~E63 (2012)
  17. Bezgin T, "Effect of toothbrushing on color changes of esthetic restorative materials", J Esthet Restor Dent, 27(Suppl 2), pp.S65~S73 (2015)
  18. Schulze KA, "Color stability and hardness in dental composites after accelerated aging", Dent Mater, 19, pp.612~619 (2003)
  19. Fay RM, "Color of restorative materials after staining and bleaching", Oper Dent, 24, pp.292~296 (1999)
  20. Horn DJ, "Sphere spectrophotometer versus human evaluation of tooth shade", J Endod, 24, pp.786~790 (1998)
  21. 최원석, "분광광도계를 이용한 상악 유전치부와 다양한 복합레진 색조의 비교", 대한소아치과학회지, 49(1), pp.1~13 (2022), 대한소아치과학회
  22. Chu SJ, "Dental color matching instruments and systems", J Dent, 38(Suppl 2), pp.E2~E16 (2010)
  23. Bagheri R, "Influence of foodsimulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials", J Dent, 33, pp.389~398 (2005)
  24. Yap AU, "Human-eye versus computerized color matching", Oper Dent, 24, pp.358~363 (1999)
  25. Alkhadim YK, "Color shift, color stability, and post-polishing surface roughness of esthetic resin composites", Materials(Basel), 13, pp.1376~ (2020)
  26. Braem M, "In vivo evaluation of four posterior composites : quantitative wear measurements and clinical behavior", Dent Mater, 2, pp.106~113 (1986)
  27. Ernst CP, "In vivo validation of the historical in vitro thermocycling temperature range for dental materials testing", Clin Oral Investig, 8, pp.130~138 (2004)
  28. Wendt SL, "The effect of thermocycling in microleakage analysis", Dent Mater, 8, pp.181~184 (1992)
  29. Gale MS, "Thermal cycling procedures for laboratory testing of dental restorations", J Dent, 27, pp.88~99 (1999)
  30. Yap AUJ, "Comparative hardness and modulus of tooth-colored restoratives : A depth-sensing microindentation study", Biomaterials, 25, pp.2179~2185 (2004)
  31. 손유진, "Silorane-based 복합레진의 색안정성에 관한 연구", 대한소아치과학회지, 37(1), pp.73~81 (2010), 대한소아치과학회
  32. Guler AU, "Effects of different drinks on stainability of resin composite provisional restorative materials", J Prosthet Dent, 94, pp.118~124 (2005)
  33. Ertaş E, "Color stability of resin composites after immersion in different drinks", Dent Mater J, 25, pp.371~376 (2006)
  34. Ceci M, "Resin infiltrant for non-cavitated caries lesions : evaluation of color stability", J Clin Exp Dent, 9, pp.E231~E237 (2017)
  35. Bhattacharya S, "Effect of thermocycling on the colour stability of aesthetic restorative materials : An in-vitro spectrophotometric analysis", Pesqui Bras Odontopediatria Clin Intergr, 20, pp.E5174~ (2020)
  36. Mazumdar P, "Comparative evaluation of microleakage of three different direct restorative materials(silver amalgam, glass ionomer cement, cention N), in class II restorations using stereomicroscope : An in vitro study", Indian J Dent Res, 30, pp.277~281 (2019)
  37. Altinvi P, "Effects of thermocycling and various drinks on the color stability of heat-polymerized acrylic resin", J Istanb Univ Fac Dent, 50, pp.15~20 (2016)
  38. Furuse AY, "Colour-stability and gloss-retention of silorane and dimethacrylate composites with accelerated aging", J Dent, 36, pp.945~952 (2008)
  39. Cattani-Lorente MA, "Effect of water on the physical properties of resin-modified glass ionomer cements", Dent Mater, 15, pp.71~78 (1999)
  40. Small IC, "Water sorption in resin-modified glass-ionomer cements : an in vitro comparison with other materials", Biomaterials, 19, pp.545~550 (1998)
  41. Um CM, "Staining of resin-based veneering materials with coffee and tea", Quintessence Int, 22, pp.377~386 (1991)
  42. Rosentritt M, "In vivo color stability of resin composite veneers and acrylic resin teeth in removal partial dentures", Quintessence Int, 29, pp.517~522 (1998)
  43. Dietschi D, "Comparison of the color stability of ten new-generation composites : An in vitro study", Dent Mater, 10, pp.353~362 (1994)
  44. de Luca Cunha CMB, "In vitro evaluation of the impact of erosive", abrasive challenge in glass ionomer cements, 2017, pp.1, 1263~1266
  45. Neslihan Tekçe, "The effect of different drinks on the color stability of different restorative materials after one month", Restorative Dentistry and Endodontics, 40(4), pp.255~261 (2015), 대한치과보존학회[DOI]
  46. Iftikhar N, "A comparative evaluation of Mechanical properties of four different restorative materials : An in vitro study", Int J Clin Pediatr Dent, 12, pp.47~49 (2019)
  47. Lee YK, "Discoloration of dental resin composites after immersion in a series of organic and chemical solutions", J Biomed Mater Res B Appl Biomater, 73, pp.361~367 (2005)
  48. Lu H, "Effect of surface roughness on stain resistance of dental resin composites", J Esthet Restor Dent, 17, pp.102~108 (2005)
  49. Patel SB, "The effect of surface finishing and storage solutions on the color stability of resin-based composites", J Am Dent Assoc, 135, pp.587~594 (2004)
  50. Mishra A, "Comparative evaluation of mechanical properties of Cention N with conventionally used restorative materials-An in vitro study", Int J Prosthodont Restor Dent, 8, pp.120~124 (2018)

관련 논문AI추천

이 간행물의 다른 논문 (13건)