본문 바로가기
KERD
논문KCI 등재

다양한 용액에 따른 Bulk-fill 복합레진의 색조안정성 평가

Color Stability of Bulk-Fill Resin Composites after Immersion in Different Media

송지현|강성균
대한소아치과학회 (The Korean Academy Of Pediatric Dentistry)|2019.11|대한소아치과학회지 (Journal of the Korean academy of pediatric dentistry)|제46권 제4호|pp. 353-361|DOI https://doi.org/10.5933/JKAPD.2019.46.4.353

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

Color stabilityBulk-fill resin compositesRestorative materials
주제분류치의학

초록

이 연구의 목적은 bulk-fill 복합레진과 전통적인 복합레진을 대상으로 다양한 용액과 시편의 두께에 따른 색조안정성의 차이를 평가하는 것이다. 전통적인 복합레진으로 Filtek™ Z250, Filtek™ Z350XT와, bulk-fill 복합레진으로 Filtek™ Bulk-fill Posterior Restorative, Tetric® N-Ceram Bulk Fill이 사용되었다. 각 복합레진 시편은 3개의 군으로 나누어 각각 증류수, 레드와인, 커피 용액에 침전시킨 뒤, 침전 1, 7, 28일에 색조 측정을 시행하여 각 시점과 초기 기준점의 CIE L*a*b*값의 색차(ΔE*)가 계산되었다. 모든 복합레진은 레드와인에서 가장 큰 색조변화가 나타났으며, 그 다음은 커피, 증류수 순서였다. Filtek™ Z350XT는 모든 용액에서가장 큰 색조변화를 나타냈고, 다음은 Filtek™ Bulk-fill Posterior Restorative였다. 그 뒤로는 Filtek™ Z250과 Tetric® N-Ceram Bulk Fill이유사한 수준의 색조변화를 나타냈다. Bulk-fill 복합레진에서 2 mm와 4 mm인 시편의 두께에 따른 색조변화의 차이는 나타나지 않았다.

Abstract

The aim of this study was to evaluate the color stability of bulk-fill and conventional resin composites with respect to different storage media and thickness of composites. Filtek™ Z250 and Filtek™ Z350XT were evaluated as conventional resin composites. Filtek™ Bulk-fill Posterior Restorative and Tetric® N-Ceram Bulk Fill were evaluated as bulk-fill resin composites. CIE L*a*b* values of baseline were measured after 24 hours of storage in distilled water, and each resin composite group was divided into three subgroups and stored in distilled water, red wine, and coffee media respectively. Again after 1, 7 and 28 days of immersion, color changes (ΔE*) were calculated using the CIE L*a*b* values. The greatest ΔE* was observed in red wine for all resin composites, and the mean color changes were ranked in the increasing order of distilled water, coffee, red wine. Filtek™ Z350XT exhibited the greatest color change in all media, followed by Filtek™ Bulk-fill Posterior Restorative. Filtek™ Z250 and Tetric® N-Ceram Bulk Fill followed with similar mean color change values. According to the 2 different thicknesses of 2 mm and 4 mm of bulk-fill resin composites, there was no thickness-related difference on color changes.

참고문헌 (32)

  1. Ilie N, "Bulk-fill resin-based composites : an in vitro assessment of their mechanical performance", Oper Dent, 38, pp.618~625 (2013)
  2. Kalliecharan D, "Shrinkage stress kinetics of Bulk Fill resin-based composites at tooth temperature and long time", Dent Mater, 32, pp.1322~1331 (2016)
  3. Czasch P, "In vitro comparison of mechanical properties and degree of cure of bulk fill composites", Clin Oral Investig, 17, pp.227~235 (2013)
  4. Al-Ahdal K, "Polymerization kinetics and impact of post polymerization on the degree of conversion of bulk-fill resin-composite at clinically relevant depth", Dent Mater, 31, pp.1207~1213 (2015)
  5. Barutcigil Ç, "Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites", J Dent, 40, pp.57~63 (2012)
  6. Deligeorgi V, "An overview of reasons for the placement and replacement of restorations", Prim Dent Care, 8, pp.5~11 (2001)
  7. Barutcigil Ç, "Color of bulk-fill composite resin restorative materials", J Esthet Restor Dent, 30, pp.3~8 (2018)
  8. Shamszadeh S, "Color stability of the bulk-fill composite resins with different thickness in response to coffee", water immersion, 2016, pp.2016, 7186140~
  9. 석유정, "Bulk-fill과 Conventional 복합레진의 물성비교", 대한소아치과학회지, 43(4), pp.427~434 (2016), 대한소아치과학회[DOI]
  10. 윤종현, "저점도 벌크필레진과 복합레진 적층수복물의 색조 평가", 구강회복응용과학지, 31(4), pp.294~300 (2015), 대한턱관절교합학회[DOI]
  11. 손유진, "Silorane-based 복합레진의 색안정성에 관한 연구", 대한소아치과학회지, 37(1), pp.73~81 (2010), 대한소아치과학회
  12. 김은하, "Effect of resin thickness on the microhardness and optical properties of bulk-fill resin composites", Restorative Dentistry and Endodontics, 40(2), pp.128~135 (2015), 대한치과보존학회
  13. Reem AA, "Optical and surface properties of different bulkfill resin composites after storage in different media", J Am Sci, 11, pp.249~254 (2015)
  14. Tanthanuch S, "Surface changes of various bulk-fill resin-based composites after exposure to different food-simulating liquid and beverages", J Esthet Restor Dent, 30, pp.126~135 (2018)
  15. Uzay Koc-Vural, "Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks", Restorative Dentistry and Endodontics, 42(2), pp.118~124 (2017), 대한치과보존학회
  16. Yap AU, "Human-eye versus computerized color matching", Oper Dent, 24, pp.358~363 (1999)
  17. Ertaş E, "Color stability of resin composites after immersion in different drinks", Dent Mater J, 25, pp.371~376 (2006)
  18. Ugur E, "Color stability of bulkfill composites immersed in different drinks", Color Res Appl, 43, pp.1~9 (2018)
  19. Um CM, "Staining of resin-based veneering materials with coffee and tea", Quintessence Int, 22, pp.377~386 (1991)
  20. Muhammet K, "Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites", Meandros Med Dent J, 18, pp.199~205 (2017)
  21. Villalta P, "Effects of staining and bleaching on color change of dental composite resins", J Prosthet Dent, 95, pp.137~142 (2006)
  22. Neslihan Tekçe, "The effect of different drinks on the color stability of different restorative materials after one month", Restorative Dentistry and Endodontics, 40(4), pp.255~261 (2015), 대한치과보존학회[DOI]
  23. Kalachandra S, "Water sorption of polymethacrylate networks : bis-GMA", TEGDM copolymers, 1987, pp.21, 329~338
  24. Gajewski VE, "Monomers used in resin composites : degree of conversion, mechanical properties and water sorption", solubility, 2012, pp.23, 508~514
  25. Dietschi D, "Comparison of the color stability of ten new-generation composites : an in vitro study", Dent Mater, 10, pp.353~362 (1994)
  26. Collares FM, "Ytterbium trifluoride as a radiopaque agent for dental cements", Int Endod J, 43, pp.792~797 (2010)
  27. Manojlovic D, "Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites", Dent Mater, 32, pp.183~191 (2016)
  28. Arikawa H, "Effect of various visible light photoinitiators on the polymerization and color of light-activated resins", Dent Mater J, 28, pp.454~460 (2009)
  29. Albuquerque PP, "Color stability, conversion, water sorption and solubility of dental composites formulated with different photoinitiator systems", J Dent, 3, pp.67~72 (2013)
  30. Ilie N, "Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites", J Dent, 41, pp.695~702 (2013)
  31. Yap AU, "Curing efficacy of a new generation high-power LED lamp", Oper Dent, 30, pp.758~763 (2005)
  32. Benetti AR, "Bulkfill resin composites : polymerization contraction, depth of cure, and gap formation", Oper Dent, 40, pp.190~200 (2015)

관련 논문AI추천

Silorane-based 복합레진의 색안정성에 관한 연구김영재, 김정욱, 김종철, 손유진, 이상훈, 장기택, 한세현, 현홍근대한소아치과학회 · 대한소아치과학회지2010 · 제37권 제1호저점도 벌크필레진과 복합레진 적층수복물의 색조 평가윤종현, 장훈상, 정지혜대한턱관절교합학회 · 구강회복응용과학지2015 · 제31권 제4호Comparison of Color Stability Between Single-Layer Bulk-Fill Composites and Bilayer Conventional and Bulk-Fill Composites김영재, 김정욱, 김현덕, 김현태, 송지수, 신터전, 장기택, 현홍근, 모하마드 알케샨, 모하마드 알카르니대한소아치과학회 · 대한소아치과학회지2025 · 제52권 제3호Effect of immersion into solutions at various pH on the color stability of composite resins with different shades권용훈, 문지덕, 박정길, 선은미, 손성애대한치과보존학회 · Restorative Dentistry and Endodontics2015 · 제40권 제4호Effect of traditional Korean fermented foods on the color stability of single-shade resin권희재, 진명욱대한턱관절교합학회 · 구강회복응용과학지2025 · 제41권 제2호Bulk-fill과 Conventional 복합레진의 물성비교김기섭, 김종빈, 김종수, 석유정대한소아치과학회 · 대한소아치과학회지2016 · 제43권 제4호

이 간행물의 다른 논문 (9건)

초등학교 어린이의 평균 구순폐쇄력과 이에 영향을 미치는 요소백경희, 김재곤, 이한이, 이대우, 양연미pp. 343-352최근 3년간 전북대학교 치과병원의 소아청소년환자 의뢰경향이대우, 김재곤, 양연미, 배철현pp. 362-368소아 수면호흡장애의 진단과 상악확장술의 치료효과김재곤, 백경희, 이대우, 김도영, 양연미pp. 369-381최소침습적 복합레진 수복을 위한 레진침투법의 활용김형준, 정태성, 김신, 박소영pp. 382-391광중합 시간과 거리의 변화에 따른 TheraCal LC의 중합도 평가이제우, 배상용, 라지영pp. 392-399
원문 보기