Shape Optimization of a Segment Ball Valve Using Metamodels
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study presents the optimization design process of a segment ball valve that involves the reduction of the flow resistance coefficient and the satisfaction of the strength requirement. Numerical analysis of fluid flow and structural analysis have been performed to predict the flow resistance coefficient and the maximum stress of a segment ball valve. In this study, a segment ball valve incorporating the advantages of a ball valve and a butterfly valve has been devised. In general, ball valves are installed in a pipe system where tight shut off is required. Butterfly valves having smaller end-to-end dimension than ball valve can be installed in narrow spaces in a pipe system. The metamodels for the shape design of a segment ball valve are built by the response surface method and the Kriging interpolation model.
Abstract
This study presents the optimization design process of a segment ball valve that involves the reduction of the flow resistance coefficient and the satisfaction of the strength requirement. Numerical analysis of fluid flow and structural analysis have been performed to predict the flow resistance coefficient and the maximum stress of a segment ball valve. In this study, a segment ball valve incorporating the advantages of a ball valve and a butterfly valve has been devised. In general, ball valves are installed in a pipe system where tight shut off is required. Butterfly valves having smaller end-to-end dimension than ball valve can be installed in narrow spaces in a pipe system. The metamodels for the shape design of a segment ball valve are built by the response surface method and the Kriging interpolation model.
참고문헌 (16)
- ANSYS, Inc., "ANSYS CFX 11.0 User`s Manual" (2007), ANSYS, Inc.
- ANSYS, Inc., "ANSYS WOKRBENCH 11.0 User`s Manual" (2007), ANSYS, Inc.
- Guinta, A., "A Comparison of Approximation Modeling Techniques: Polynomial Versus Interpolating Models", Proceedings of the 7th AIAA, NASA, pp.ISSMO Symposium on Multidisciplinary Analysis and Optimization, 1998[DOI]
- Henderson, A.D., "A Numerical Study of the Flow through a Safety Butterfly Valve in a Hydro-Electric Power Scheme", 16th Australasian Fluid Mechanics Conference, pp.1116~1122 (2007)
- Huang, C.D., "Three-dimensional analysis of partially open butterfly valve flows", Trans. of the ASME, 118, pp.562~568 (1996)
- Industrial-process control valves-Part 2-3:Flow capacity-Test procedures, "IEC", IEC, ~, pp.60534-2-3 (1997)
- Kimura, T., "Hydrodynamic Characteristics of a Butterfly Valve-Prediction of Pressure Loss Characteristics", ISA Trans., 34(4), pp.319~326 (1995)
- 이진환, "Prediction of the resistance coefficient in a segment ball valve", 대한기계학회 영문 논문집, 24(1), pp.185~188 (2010), 대한기계학회
- Lee, J.H., "Shape Optimization of a Segmented Ball Valve Considering FSI", Int. Conf, on Computational Design in Engineering (2009)
- Lee, K.H., "A Global Robust Optimization Using Kriging Based Approximation Model", JSME Int. J., 49(3), pp.779~788 (2006)
- Leary, S.J., "A derivative based surrogate model for approximating and optimizing the output of an expensive computer simulations", J. Glob. Optim., 30(1), pp.39~58 (2004)
- Montgomery, D.C., "Design and Analysis of Experiments" (2005)
- Ogawa, K., "Hydrodynamic Characteristics of a Butterfly Valve-Prediction of Torque Characteristics", ISA Trans, 34(4), pp.327~333 (1995)
- Skousen, L.S., "Valve Handbook" (2006), McGraw-Hill Korea
- Smith, P., "Valve Selection Handbook" (2004), Elsevier
- 송병철, "정강도를 고려한 상부 컨트롤 암의 구조설계", 한국자동차공학회 논문집, 17(1), pp.190~196 (2009), 한국자동차공학회