Effect of the turbulence model in the flow analysis of triple offset butterfly valve
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A valve is a device that regulates the flow of fluid by manipulating various passageways to control the pressure and flow stream. For the robust design of valves using a numerical approach, understanding the flow behavior through valves with complicated geometric structures is crucial. The present paper reports a numerical study of flow behavior through a 300 mm sized triple offset butterfly valve with different turbulence models of k–ε and Reynolds stress models. The effect of the turbulence model and consequent flow behavior analysis of the valve under different disc opening cases were carried out to examine the effect of different turbulence models. Different discrepancies between the numerical and experimental results were observed, and the Reynolds stress model showed a considerably smaller discrepancy than that of the k–ε model. Whereas the turbulence effect was well expressed with the Reynolds stress model at the developing location, it was well expressed with the k–ε model rather than the Reynolds stress model at the developed location.
Abstract
A valve is a device that regulates the flow of fluid by manipulating various passageways to control the pressure and flow stream. For the robust design of valves using a numerical approach, understanding the flow behavior through valves with complicated geometric structures is crucial. The present paper reports a numerical study of flow behavior through a 300 mm sized triple offset butterfly valve with different turbulence models of k–ε and Reynolds stress models. The effect of the turbulence model and consequent flow behavior analysis of the valve under different disc opening cases were carried out to examine the effect of different turbulence models. Different discrepancies between the numerical and experimental results were observed, and the Reynolds stress model showed a considerably smaller discrepancy than that of the k–ε model. Whereas the turbulence effect was well expressed with the Reynolds stress model at the developing location, it was well expressed with the k–ε model rather than the Reynolds stress model at the developed location.
참고문헌 (16)
- N. H. Kaartinen, "Fluid flow control de-vice. U.S. Patent No. 4,258,740", ~ (1981)
- S. -W. Choi, "Analysis of flow characteristics and effects of turbulence models for the but-terfly valve", Applied Sciences, 11(14), pp.6319~ (2021)
- P. Smith, "Valve selection handbook: engi-neering fundamentals for selecting the right valve design for every industrial flow application" (2004), Gulf Professional Pub-lishing
- A. Del Toro, "Computa-tional fluid dynamics investigation of butterfly valve perfor-mance factors", Journal-American Water Works Associa-tion, 107(5) (2015)
- M. K. Sharma, "Aniso-tropic energy transfers in rapidly rotating turbulence", Phys-ics of Fluids, 31(8) (2019)
- X. Wu, "Boundary layer turbulence and freestream turbulence interface, turbulent spot and freestream turbulence interface, laminar boundary layer and freestream turbulence interface", Physics of Flu-ids, 31(4) (2019)
- H. Li, "Separated boundary layer transition un-der pressure gradient in the presence of free-stream turbu-lence", Physics of Fluids, 31(10) (2019)
- W. P. Jones, "The prediction of laminar-ization with a two-equation model of turbulence", Interna-tional Journal of Heat and Mass Transfer, 15(2), pp.301~314 (1972)
- B. E. Launder, "Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc", Letters in Heat and Mass Transfer, 1(2), pp.131~137 (1974)
- Williams, S, "Flow Monitoring us-ing Flow Control Device. U.S. Patent No. 7,092,797", ~ (2006)
- ISA, "Standard, Control Valve Sizing Equations for Com-pressible Fluids, ISA-S75", The International Society of Au-tomation: Research Triangle Park, ~ (2007)
- ISA, "Standard, Control Valve Capacity Test Procedures, ISA-S75", The International Society of Automation: Re-search Triangle Park, ~ (2007)
- "KS B 2101; Test Procedures for Flow Coefficient Valves", Korean Standards Association, ~ (2003)
- 이정흠, "Analysis of Hydraulic Characteristics According to the Cross-Section Changes in Submerged Rigid Vegetation", 한국해양공학회지, 36(5), pp.326~339 (2022), 한국해양공학회[DOI]
- 김태영, "CFD Simulation of Multiphase Flow by Mud Agitator in Drilling Mud Mixing System", 한국해양공학회지, 35(2), pp.121~130 (2021), 한국해양공학회[DOI]
- 김재욱, "Analysis of Dynamic Response Characteristics for 5 MW Jacket-type Fixed Offshore Wind Turbine", 한국해양공학회지, 35(5), pp.347~359 (2021), 한국해양공학회[DOI]