自動車 廢觸媒의 浸出液으로부터 시멘테이션에 의한 白金族 金屬의 回收
Recovery of Platinum Group Metals from the Leach Solution of Spent Automotive Catalysts by Cementation
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
금속분말을 환원제로 사용하는 시멘테이션에 의하여 자동차 폐촉매의 침출액과 침출잔사의 세척액으로부터 백금족 금속을 환원석출시켜 회수하는 연구를 수행하였다. 환원제로 사용한 알루미늄, 마그네슘 그리고 아연이 백금족 금속의 시멘테이션에 미치는 영향을 조사하였으며 알루미늄을 최적 환원제로 선정하였다. 침출액에 19.3 당량의 알루미늄을 첨가하고 50~60℃에서 10분간 시멘테이션을 행하였을 때 백금, 팔라듐, 로듐의 환원석출율은 각각 99.3%, 99.4%, 90.2% 정도 이었다. 또한 세척액에 알루미늄을 45 당량 투입한 후 시멘테이션 반응을 통해 백금 , 팔라듐, 로듐을 각각 97%, 97%, 90% 회수할 수 있었다. 그리고 회수한 환원석출물의 금속불순물들을 질산침출로 제거함으로써 백금족 금속의 품위를 약 10% 정도 향상시킬 수 있었다.
Abstract
The recovery of platinum group metals (PGMs) from the leach solution of spent auto-catalyst and the wash solution of the leach residue was investigated in the laboratory scale experiments by the cementation process using metal powders as the reductant. In this study, the effect of Al, Mg and Zn powders on the cementation process was particularly examined. Aluminum powder was selected as the most suitable reductant for the cementation of PGMs. At the cementation time of 10 minute under the aluminium stoichimetric amount of 19.3 and the reaction temperature of 50~60℃, the recovery of platinum group metals from the leach solution of the spent auto-catalyst was found to be 99.3%, 99.4%, 90.2% for Pt, Pd and Rh, respectively. Under the same conditions with the aluminium stoichimetric amount of 45, the recovery of platinum group metals from the wash solution of the leach residue of spent catalyst was observed to be 97%, 97% and 90% for Pt, Pd and Rh, respectively. In addition, it was possible to upgrade the platinum group metals in the precipitates obtained from the cementation process by about 10% through the removal of metal impurities by the nitric acid leaching at ambient temperature.
참고문헌 (20)
- "Reference for Business, Encyclopedia of Business, 2nd ed"[URL]
- "Autocatalyst, Johnson Matthey"[URL]
- Robson, G. G., "PLATINUM 1988", pp.64~ (1988), Johnson Matthey
- Heck, R. M., "Automobile exhaust catalysts", Applied Catalysis A: General, 221, pp.443~457 (2001)
- Jang, B. H., "Effect of Alkaline Earth", Rare earth Addition on the Heat Resistance of Pt : Rh Three Wat Catalysts, 2001, pp.39(2), 131~137
- van Gelder, J.W., "Platinum from AngloPlatinum in catalysts of European car manufacturers" (2008), Profundo economic research
- Fornalczyk, A., "Removal of Platinum Group Metals from the Used Auto Catalytic Converter", Metalurgija, 48(2), pp.133~136 (2009)
- Jollie, D., "PLATINUM 2010" (2010), Johnson Matthey
- Mishra, R.K., "Recovery of platinum group metals from automobile catalytic converters - A review, In Precious Metals '89", pp.483~501 (1989), TMS-AIME
- Hageluken, C., "Closing the loop-Recycling of automotive catalysts", METALL, 61(1), pp.24~39 (2007)
- Suzuki, S., "Recovery of Platinum Group Metals at Nippon PGM Co., Ltd", Journal of the Mining and Materials Processing Institute of Japan, 123(12), pp.734~736 (2007)
- High-temperature cyanide leaching of platinum-group metals from automobile catalysts - Pilot plant, "Kuczynski, R.J.", ~, pp.9543 (1995)
- Chen, J., "A new technique for extraction of platinum group metals by pressure cyanidation", Hydrometallurgy, 82, pp.164~171 (2006)
- Meng, X., "Recovery of platinum and palladium from spent automobile catalytic converters by leaching with solutions containing halogen salts, ammonium and oxidants", Prodeedings of Third International Symposium on Recycling of Metals and Engineered Materials, pp.501~513 (1995), TMS
- 이재천, "自動車 廢觸媒로부터 鹽酸浸出에 의한 白金族 金屬의 回收", 자원리싸이클링, 13(5), pp.28~36 (2004), 한국자원리싸이클링학회
- 이재천, "自動車 廢觸媒의 浸出液으로부터 白金族 金屬의 溶媒抽出", 자원리싸이클링, 15(5), pp.3~10 (2006), 한국자원리싸이클링학회
- Edwards, R.I., "Refining of the platinum-group metals", JOM, 28(7), pp.4~9 (1976)
- Hunt, L.B., "Availability of the Platinum Metals", Platinum Metals Rev, 13(4), pp.126~138 (1969)
- Benner, L.S., "Recovery and Refining of Precious Metals, In Precious Metals Science and Technology", pp.375~399 (1991), International Precious Metals Institute
- Cramer, L.A., "The Extractive Metallurgy of South Africa's Platinum Ores", JOM, 53(10), pp.14~18 (2001)