自動車 廢觸媒의 浸出液으로부터 白金族 金屬의 溶媒抽出
Solvent Extraction of Platinum Group Metals from the leach Liquor of Spent Automotive Catalyst
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
자동차 폐촉매의 침출액으로부터 백금족 금속의 분리를 위하여 용매추출에 대한 기초연구가 수행되었다. 추출제로 tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) 그리고 di-n-hexyl sulfide (DHS)를 등유에 희석하여 사용하였다. 추출제의 종류 및 농도가 백금, 팔라듐 그리고 로듐의 추출거동에 미치는 영향을 조사하였다. 또한 세륨, 납, 철, 마그네슘 그리고 알루미늄 등 침출액에 존재하는 주요 금속불순물의 추출거동도 함께 조사하였다. TBP는 백금과 팔라듐, 그리고 TOA는 백금, 팔라듐, 로듐을 동시에 추출하였다. DHS 추출제인 SFI-6에 의한 용매추출 시 백금이 팔라듐과 함께 유기상으로 추출되었으나, SFI-6R은 팔라듐만 선택적으로 추출하였다. SFI-6R은 SFI-6에 비하여 팔라듐에 대한 선택성이 우수하였으나 추출속도가 느렸다. 추출제의 종류에 따라 백금족 금속과 함께 추출되는 금속불순물들이 달라지며 세정 또는 탈거공정에서 이들을 제거하여야 한다. 자동차 폐촉매의 침출액으로부터 백금, 팔라듐 그리고 로듐을 분리하기 위하여 먼저 DHS 추출제인 SFI-6R를 사용하여 팔라듐을 분리한 다음 TBP 또는 TOA으로 백금을 추출하여 로듐과 분리하는 공정이 적절한 것으로 나타났다.
Abstract
The solvent extraction for the separation of platinum group metals from the leach liquor of spent automotive catalysts has been studied. Tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) and di-n-hexyl sulfide (DHS) were used as extractants and kerosene as a diluent. The extraction behavior of platinum, palladium and rhodium has been investigated as functions of different kinds of extractants and their concentrations. In addition, the extraction behavior of the major metal impurities such as cerium, lead, iron, magnesium and aluminum has been investigated. Platinum and palladium were extracted with TBP. And platinum, palladium and rhodium were extracted with TOA. Platinum was co-extracted with palladium into the organic phase by solvent extraction using SFI-6 of DHS extractant, but only palladium was selectively extracted with SFI-6R. The selective extraction of palladium with SFI-6R was found better than that with SFI-6, but the kinetics of extraction with SFI-6R was found poor in comparison to SFI-6. The metal impurities extracted simultaneously during the extraction of platinum group metals should be removed in scrubbing and stripping processes. A suitable process has been proposed for the separation of platinum group metals from the leach liquor of spent automotive catalysts. Initially palladium was extracted with SFI-6R, followed by the separation of platinum with TBP or TOA leaving rhodium in the raffinate.
참고문헌 (16)
- "Recovering platinum group metals from autocatalyst", pp.40~44, 40
- "Recovery of platinum group metals from automobile catalytic converters - A review ed. by Jha", pp.483~501
- "Platinum 2005 Interim Review" (2005)
- "Handbook of Extractive Metallurgy edited by Fathi Habashi", 3, pp.1269~1328 (1997)
- "Chapter 9 - Recovery and Refining of Precious Metals edited by Linda S. Benner et al.", pp.377~378 (1991)
- "제2장 백금족 금속 제련기술의 현황 산업 폐기물로부터 백금족 금속의 회수 및 정제기술 개발 한국지질자원연구원", pp.40~49 (1997)
- "Refining of the platinum-group metals", pp.4~9, August 1976
- "Solvent extraction in platinum group metal processing", pp.210~224
- "Solvent extraction at Inco's Acton precious metal refinery", pp.151~155, March 1982
- "Solvent Extraction in Precious Metals Refining", pp.13~17, June 1986
- "Solvent extraction of palladium by tributyl phosphate in HCl solution", 31(1), pp.33~39 (1996)
- "Refining of platinum group metals by solvent extraction", 35(1), pp.37~42 (1998)
- "Solvent extraction of palladium with Di-n-hexyl sulfide from hydrochloric acid media", 37(3), pp.166~172 (2000)
- "Recovery of platinum group metals from spent automotive catalysts by hydrochloric acid leaching", 13(5), pp.28~36 (2004)
- "Solvent Extraction of Precious Metals", 53(10), pp.641~646 (2002)
- "Separation of Platinum Group Metals in Hydrochloric Media Solvent Extraction of Palladium with Dialkyl Sulphides Separation Processes in Hydrometallurgy Ed. by Davies Society of Chemical Industry", pp.2242006614~