알칼리 활성 슬래그의 열역학적 수화모델링에 대한 황산염의 영향
Influence of Sulfate on Thermodynamic Modeling of Hydration of Alkali Activated Slag
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 석고의 형태로 황산염이 혼입된 알칼리 활성 슬래그의 수화반응에 대해, 깁스 최소화 에너지 개념을 이용한 반응계산 결과가 계산 조건에 따라 어떻게 달라지는지에 대해 확인하였다. 계산을 위한 변수로는 황화물의 고려 여부, AFt/AFm 상의생성가능성 여부, 대기 중 산소의 반응기여 여부 등을 검토하였다. 계산결과, 실제 위의 다양한 조건의 변화에도 불구하고 공극량, 화학수축과 같이 이후 배합의 성능에 영향을 미칠 수 있을 만한 값 들은 크게 차이가 발생하지 않았는데, 이 변수들에 의한 변화폭은 물결합재비에 의한 변화폭에 비해 월등히 작은 값이었다. 생성되는 물질들의 종류 및 양은 일부 초기조건 설정에 따라 변화할 수 있으나, 가장 주요한 수화물인 C-(N-)A-S-H의 생성량에는 별다른 영향을 미치지 않았다.
Abstract
The present study investigated hydration of alkali activated slag incorporating sulfate as a form of anhydrite by employing thermodynamic modeling using the Gibbs free energy minimization approach. Various parameters were evaluated in the thermodynamic calculations, such as presence of sulfide, precipitation/dissolution of AFt/AFm phase, and the effect of oxic condition on the predicted reaction. The calculations suggested no significant difference in the void volume and chemical shrinkage, which might influence the performance of the mixtures, in spite of various changes of the parameters. Although the types of hydration products and their amount varied according to the input conditions, their variations were smaller range than that induced by water-to-binder ratio. Moreover, it did not affect the amount of C-(N-)A-S-H which was the most important hydration product.
참고문헌 (19)
- Lothenbach, B., "Supplementary cementitious materials", Cement and Concrete Research, 41(12), pp.1244~1256 (2011)
- Li, C., "A review. The comparison between alkali-activated slag(Si+Ca)and metakaolin(Si+Al)cements", Cement and Concrete Research, 40(9), pp.1341~1349 (2010)
- Alahrache, S., "Chemical activation of hybrid binders based on siliceous fly ash and Portland cement", Cement and Concrete Composites, 66, pp.10~23 (2016)
- Wang, S. D., "Hydration products of alkali activated slag cement", Cement and Concrete Research, 25(3), pp.561~571 (1995)
- Escalante-García, J. I., "hydration products and reactivity of blast-furnace slag activated by various alkalis", Journal of the American Ceramic Society, 86(12), pp.2148~2153 (2003)
- Matschei, T., "The AFm phase in Portland cement", Cement and Concrete Research, 37(2), pp.118~130 (2007)
- Lothenbach, B., "Hydration of alkali-activated slag. thermodynamic modelling", Advances in Cement Research, 19(2), pp.81~92 (2007)
- Chen, W., "The hydration of slag, part 1. reaction models for alkali-activated slag", Journal of Materials Science, 42(2), pp.428~443 (2007)
- Myers, R. J., "Thermodynamic modelling of alkali-activated slag cements", Applied Geochemistry, 61, pp.233~247 (2015)
- Myers, R. J., "Phase diagrams for alkali-activated slag binders", Cement and Concrete Research, 95, pp.30~38 (2017)
- 이효경, "수경성 무기재료의 수화도 측정에 대한 건조방법의 영향: 2) 알칼리 활성 슬래그", 자원리싸이클링, 27(1), pp.106~117 (2018), 한국자원리싸이클링학회[DOI]
- Kulik, D. A., "GEM-Selektor geochemical modeling package. revised algorithm and GEMS3K numerical kernel for coupled simulation codes", Computational Geosciences, 17, pp.1~24 (2013)
- Wagner, T., "GEM-Selektor geochemical modeling package.TSolMod library and data interface for multicomponent phase models", Canadian Mineralogist, 50, pp.1173~1195 (2012)
- Lothenbach, B., "Cemdata18. A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials", Cement and Concrete Research (2018)
- Helgeson, H. C., "Theoretical prediction of the thermodynamic behavior of aqueous electrolytes at high pressures and temperatures.IV. Calculation of activity coefficients, osmotic coefficients, and apparent molal and standard and relative partial molal properties to 600C and 5 kb", American Journal of Science, 281, pp.1249~1516 (1981)
- Myers, R. J., "A thermodynamic model for C-(N-)ASH gel. CNASH_ss. Derivation and validation", Cement and Concrete Research, 66, pp.27~47 (2014)
- Ren, Q., "Crystallisation behaviour of blast furnace slag modified by adding fly ash", Ceramics International, 44(10), pp.11628~11634 (2018)
- Palacios, M., "Effect of shrinkagereducing admixtures on the properties of alkali-activated slag mortars and pastes", Cement and concrete research, 37(5), pp.691~702 (2007)
- Schwab, A. P., "Characteristics of blast furnace slag leachate produced under reduced and oxidized conditions", Journal of Environmental Science and Health Part A, 41(3), pp.381~395 (2006)[DOI]