폐기물을 보조연료로 이용한 환원철 제조 및 환원거동 분석
Preparation and Characterization of Reduced Iron by Using Wastes as Auxiliary Fuels
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 자원 재활용 및 생산비용 절감을 위해 폐기물을 국내 저급 철광석의 고품위 환원철(Direct Reduction Iron, DRI) 제조를 위한 보조연로로 사용하였으며, 폐기물이 환원철 제조에 미치는 영향을 알아보고자 한다. 석탄을 주연료 및 환원제로 사용하였으며, 폐기물을 보조연료로 사용하여 주연료의 대체 가능성을 확인하였다. 다양한 폐기물의 성상 및 발열량 분석을 통하여 연료 및 환원제로서의 가능성을 평가하였으며, 선별된 폐기물은 보조연료로 이용하여 반응온도 및 시간 제어를 통해 고품위 환원철을제조하였다. 제조된 환원철은 금속화율 측정을 통해 산화철이 Fe 금속으로 환원이 잘 이루어졌음을 확인하였다. 환원철의 금속화율은 폐기물의 발열량이 높을수록 증가하는 경향을 보였으며, 특히 발열량과 휘발분 함량이 높은 페타이어와 폐비닐의 경우 1,200 o C 에서 1시간 반응 조건에서 폐기물을 사용하지 않을 때 보다 더 높은 금속화율이 관찰 되었다. 고발열량의 휘발성 폐기물은 연료로써 우수한 물성을 가지고 있으며, 반응온도 및 시간의 최적화를 통해 고품위 환원철 제조를 위한 보조연료로 사용이 가능함을 확인하였다.
Abstract
In this study, the wastes were used as fuels for direct reduction iron (DRI) production to reduce production cost and recycle the wastes. We examined the effects of wastes on the reduction behavior of DRI manufacture and the possibility of using wastes as auxiliary fuels. The proximate and Ultimate analysis were carried out to confirm the properties of wastes as fuels, and highquality reduced irons were fabricated by using the waste as an auxiliary fuel. The metallization of reduced irons increased as the calorific value increase of auxiliary fuel. Especially, the reduced irons fabricated from the waste tires and vinyl plastics which had high heat energy and volatile matters showed higher metallization than the others. The high calorific value and volatility of waste were significant properties as fuel. The high quality DRI could be fabricated with wastes as auxiliary fuels through optimization of reaction conditions.
참고문헌 (20)
- Baikadi, A., "Operability Analysis of Direct Reduction of Iron Ore by Coal in an Industrial Rotary Kiln", IFAC-PapersOnLine, 49(1), pp.468~473 (2016)
- Dabin Guo, "Kinetics and mechanisms of direct reduction of iron ore-biomass composite pellets with hydrogen gas", Int. J. Hydro. Energy, 40, pp.4733~4740 (2015)
- Ankit, Sethi, S., "Reduction behavior of iron ore pellets with addition of plastics along with conventional reducing agents", J. Metall. Mater. Sci., 57(3), pp.167~171 (2015)
- Milandia, A., "Reduction of Low Grade Iron Ore Using a Mixture of Polyethilene (HDPE", LLDPE) and Coal as an Alternate Reductant, 2015, pp.1112, 515~518
- 오광중, "도시생활폐기물과 저품위 무연탄 혼합연료의 열분해 반응특성", 대한환경공학회지, 32(11), pp.1046~1053 (2010), 대한환경공학회
- Strezov, V., "Iron ore reduction using sawdust.Experimental analysis and kinetic modelling", Renewable Energy, 31, pp.1892~1905 (2006)
- Hata, Y., "Biotar Ironmaking Using Wooden Biomass and Nanoporous Iron Ore", Energy Fuels, 23, pp.1128~1131 (2009)
- Hu, Q., "Thermal behavior and reaction kinetics analysis of pyrolysis and subsequent in-situ gasification of torrefied biomass pellets", Energy Convers. Manage, 161, pp.205~214 (2018)
- Guo, D., "Direct reduction of iron ore", biomass composite pellets using simulated biomass-derived syngas : Experimental analysis and kinetic modelling, 2017, pp.327, 822~830
- Zuo, H. B., "Direct reduction of iron ore by biomass char", Int. J. Miner., Metall. Mater., 20(6), pp.1~8 (2013)
- Alsaleh, A., "Waste Tire Pyrolysis : Influential Parameters and Product Properties, Curr", Sustainable, 2014, pp.1, 129~135
- 이건주, "열중량 분석기를 이용한 SRF 및 산업폐기물 반응속도 연구", 신재생에너지, 11(1), pp.20~26 (2015), 한국신·재생에너지학회
- Kaantee, U., "Cement manufacturing using alternative fuels and the advantages of process modelling", Fuel Process. Technol., 85, pp.293~301 (2004)
- Conesa, J. A., "Organic and inorganic pollutants from cement kiln stack feeding alternative fuels", J. Hazard. Mater., 158, pp.585~592 (2008)
- 남성남, "투입폐기물이 시멘트", 클링커내 중금속 함량에 미치는 영향, 2009, pp.26(8), 694~701[DOI]
- 윤영민, "Phase Transition and Metalization of DRI According to the Quality of Iron Oxide", 한국세라믹학회지, 52(5), pp.389~394 (2015), 한국세라믹학회
- Murakami, T., "Reduction Mechanism of Iron Oxide–Carbon Composite with Polyethylene at Lower Temperature", ISIJ Int., 51(1), pp.9~13 (2011)
- Liu, G. S., "Thermal investigations of direct iron ore reduction with coal", Thermochim. Acta, 410, pp.133~140 (2004)
- Man, Y., "Influence of temperature and time on reduction behavior in iron ore–coal composite pellets", Powder Technol., 256, pp.361~366 (2014)
- 김동원, "열중량 분석기를 이용한 목재펠릿 및 국내무연탄의 연소 특성 조사", Korean Chemical Engineering Research(HWAHAK KONGHAK), 48(1), pp.58~67 (2010), 한국화학공학회
