본문 바로가기
KERD
논문KCI 등재

수경성 무기재료의 수화도 측정에 대한 건조방법의 영향: 2) 알칼리 활성 슬래그

Influence of Drying Methods on Measurement of Hydration Degree of Hydraulic Inorganic Materials: 2) Alkali-activated slag

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류자원공학

초록

본 연구는 수경성 무기재료를 사용한 배합의 고정수량 측정을 위해 적절히 사용할 수 있는 건조방법을 찾기 위해 수행되었으며, 제1보에서는 보통 포틀랜드 시멘트, 그리고 본 제 2보에서는 알칼리 활성 슬래그의 경우에 대해 다루었다. 다양한 w/b, 알칼리 활성화제 종류 및 양을 갖는 알칼리 활성 슬래그에 대해 진공건조 및 오븐건조, 이 둘의 조합 그리고 작열법이 사용되었다. 실험결과, 진공건조 후 오븐건조를 사용한 경우 비록 수화물의 결정수 일부가 분해되지만 자유수분의 완전한 증발이 가능하여 그 결과값의 편차가 작았으며, 따라서 AAS의 수화도를 정량평가하기 위한 단순하고 쉬운 고정수량 측정방법으로 적합하다고 판단하였다.

Abstract

The present study was carried out to find a suitable drying method for the determination of non-evaporable water in hydraulic inorganic materials. In Part 1 of the paper, the case ordinary Portland cement was discussed and, in this Part 2, the case of alkali active slag (AAS) was investigated. Various drying methods including vacuum and oven drying, and an ignition, were used for the AAS system having different w/b, types and amounts of alkali activators. It was found that a combination of the vacuum and oven drying was a suitable drying method for the AAS case. Although a part of the crystallized water in hydration products was decomposed, but the free and adsorbed water could be completely evaporated and the deviation of the results was small.

참고문헌 (28)

  1. 이효경, "수경성 무기재료의 수화도 측정에 대한 건조방법의 영향: 1) 보통 포틀랜드 시멘트 페이스트 및 모르타르", 자원리싸이클링, 27(1), pp.92~105 (2018), 한국자원리싸이클링학회[DOI]
  2. Song, S., "Hydration of alkali-activated ground granulated blast furnace slag", Journal of Materials Science, 35(1), pp.249~257 (2000)[DOI]
  3. Kim, D., "Geopolymer formation and its unique properties", Environmental geology, 51(1), pp.103~111 (2006)[DOI]
  4. Li, C., "A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements", Cement and Concrete Research, 40(9), pp.1341~1349 (2010)[DOI]
  5. Bullard, J. W., "Mechanisms of cement hydration", Cement and Concrete Research, 41(12), pp.1208~1223 (2011)[DOI]
  6. Schwarz, N., "Influence of a fine glass powder on cement hydration: Comparison to fly ash and modeling the degree of hydration", Cement and Concrete Research, 38(4), pp.429~436 (2008)[DOI]
  7. Lam, L., "Degree of hydration and gel", space ratio of high-volume fly ash, Cement and Concrete Research, pp.2000, 30(5)[DOI]
  8. Haha, M. B., "Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag-Part I: Effect of MgO", Cement and Concrete Research, 41(9), pp.955~963 (2011)[DOI]
  9. Haha, M. B., "Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags", Cement and Concrete Research, 41(3), pp.301~310 (2011)[DOI]
  10. North, M. R., "Kinetics of silicate exchange in alkaline aluminosilicate solutions", Inorganic chemistry, 39(12), pp.2661~2665 (2000)[DOI]
  11. Bakharev, T., "Effect of elevated temperature curing on properties of alkali-activated slag concrete", Cement and concrete research, 29(10), pp.1619~1625 (1999)[DOI]
  12. Korpa, A., "The influence of different drying methods on cement paste microstructures as reflected by gas adsorption: comparison between freeze-drying (F-drying), D-drying, P-drying and oven-drying methods", Cement and Concrete Research, 36(4), pp.634~649 (2006)[DOI]
  13. Coussy, O., "The equivalent pore pressure and the swelling and shrinkage of cement-based materials", Materials and structures, 37(1), pp.15~20 (2004)[DOI]
  14. Bakharev, T., "Geopolymeric materials prepared using Class F fly ash and elevated temperature curing", Cement and concrete research, 35(6), pp.1224~1232 (2005)[DOI]
  15. Luke, K., "Selective dissolution of hydrated blast furnace slag cements", Cement and Concrete Research, 17(2), pp.273~282 (1987)[DOI]
  16. Yang, K. H., "Properties of cementless mortars activated by sodium silicate", Construction and Building Materials, 22(9), pp.1981~1989 (2008)[DOI]
  17. Yang, K. H., "Workability loss and compressive strength development of cementless mortars activated by combination of sodium silicate and sodium hydroxide", Journal of materials in Civil Engineering, 21(3), pp.119~127 (2009)[DOI]
  18. Yang, K. H., "Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars", Construction and Building Materials, 29, pp.410~419 (2012)[DOI]
  19. Myers, R. J., "Generalized structural description of calcium-sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model", Langmuir, 29(17), pp.5294~5306 (2013)[DOI]
  20. Halle, J. C., "Vaporization and decomposition of sodium sulfate. Thermodynamics and kinetics", The Journal of Physical Chemistry, 84(13), pp.1699~1704 (1980)[DOI]
  21. Lothenbach, B., "Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes", Cement and Concrete Research, 37(4), pp.483~491 (2007)[DOI]
  22. Guerrieri, M., "Investigation of the cause of disintegration of alkali-activated slag at temperature exposure of <TEX>$50^{\circ}C$<", TEX>, 2011, pp.23(12), 1589~1595
  23. Garbev, K., "Cell Dimensions and Composition of Nanocrystalline Calcium Silicate Hydrate Solid Solutions. Part 2: X-Ray and Thermogravimetry Study", Journal of the American Ceramic Society, 91(9), pp.3015~3023 (2008)[DOI]
  24. Yu, P., "Thermal dehydration of tobermorite and jennite", Concrete Science and Engineering, 1, pp.185~191 (1999)
  25. Collins, F., "Effect of pore size distribution on drying shrinking of alkali-activated slag concrete", Cement and Concrete Research, 30(9), pp.1401~1406 (2000)[DOI]
  26. Jensen, O. M., "Water-entrained cement-based materials: I. Principles and theoretical background", Cement and concrete research, 31(4), pp.647~654 (2001)[DOI]
  27. Escalante-Garcia, J. I., "Hydration products and reactivity of blast?furnace slag activated by various alkalis", Journal of the American Ceramic Society, 86(12), pp.2148~2153 (2003)[DOI]
  28. Gao, X., "Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends", Construction and Building Materials, 80, pp.105~115 (2015)[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (11건)