수치실험을 통한 스트레스 감소 예방보수모형의 고찰
Numerical Experiments for the Stress-Reducing Preventive Maintenance Model
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper investigates the stress-reducing preventive maintenance model through numerical experiments. The preventive maintenance model is used to analyze the relationship between related conditions and variables to gain insight into the efficient operation of the system when performing preventive maintenance in real-world situations. Various preventive maintenance models have been developed over the past decades and their complexity has increased in recent years. Increasing complexity is essential to reflect reality, but recent models can only be interpreted through numerical experiments. The stress-reducing preventive maintenance is a newly introduced preventive maintenance concept and can only be interpreted numerically due to its complexity, and has received little attention because the concept is unfamiliar. Therefore, for information purposes, this paper investigates the characteristics of the stress-reducing preventive maintenance and the relationship between parameters and variables through numerical experiments. In particular, this paper is focusing on the economic feasibility of stress-reducing preventive maintenance by observing changes in the optimal preventive maintenance period in response to changes in environmental stress and the improvement factor. As a result, when either the environmental stress or the improve effect of stress-reducing preventive maintenance is low, it is not necessary to carry out the stress-reducing preventive maintenance at excessive cost. In addition, it was found that the age reduction model is more economical than the failure rate reduction model.
Abstract
This paper investigates the stress-reducing preventive maintenance model through numerical experiments. The preventive maintenance model is used to analyze the relationship between related conditions and variables to gain insight into the efficient operation of the system when performing preventive maintenance in real-world situations. Various preventive maintenance models have been developed over the past decades and their complexity has increased in recent years. Increasing complexity is essential to reflect reality, but recent models can only be interpreted through numerical experiments. The stress-reducing preventive maintenance is a newly introduced preventive maintenance concept and can only be interpreted numerically due to its complexity, and has received little attention because the concept is unfamiliar. Therefore, for information purposes, this paper investigates the characteristics of the stress-reducing preventive maintenance and the relationship between parameters and variables through numerical experiments. In particular, this paper is focusing on the economic feasibility of stress-reducing preventive maintenance by observing changes in the optimal preventive maintenance period in response to changes in environmental stress and the improvement factor. As a result, when either the environmental stress or the improve effect of stress-reducing preventive maintenance is low, it is not necessary to carry out the stress-reducing preventive maintenance at excessive cost. In addition, it was found that the age reduction model is more economical than the failure rate reduction model.
참고문헌 (34)
- Aghezzaf, E. H., "An integrated production and preventive maintenance planning model", European Journal of Operational Research, 181(2), pp.679~685 (2007)
- Assaf, D., "Optimal group maintenance policies with continuous and periodic inspections", Management Science, 33(11), pp.1440~1452 (1987)
- Barlow, R., "Optimum preventive maintenance policies", Operations Research, 8(1), pp.90~100 (1960)
- Bartholomew-Biggs, M., "Modelling and optimizing sequential imperfect preventive maintenance", Reliability Engineering and System Safety, 94(1), pp.53~62 (2009)
- Beichelt, F., "A generalized block replacement policy", IEEE Transaction on Reliability, 30(2), pp.171~172 (1981)
- Chan, P. K. W., "Two criteria for preventive maintenance", IEEE Transactions on Reliability, 27(4), pp.272~273 (1978)
- Chelbi, A., "An optimal inspection strategy for randomly failing equipment", Reliability Engineering and System Safety, 63(2), pp.127~131 (1999)
- Chen, H. P., "Reliability analysis and optimum maintenance of coastal flood defences using probabilistic deterioration modelling", Reliability Engineering and System Safety, 185, pp.163~174 (2019)
- Cheng, C. Y., "The periodic preventive maintenance policy for deteriorating systems by using improvement factor model", International Journal of Applied Science and Engineering, 1(2), pp.114~122 (2003)
- Chien, Y. H., "The optimal preventive-maintenance policy for a NHPBP repairable system under free-repair warranty", Reliability Engineering and System Safety, 188, pp.444~453 (2019)
- Dong, W., "Optimal periodic maintenance policies for a parallel redundant system with component dependencies", Computers and Industrial Engineering, 138, pp.106133~ (2019)
- Hashemi, M., "Optimal maintenance policies for coherent systems with multi-type components", Reliability Engineering and System Safety, 195, pp.106674~ (2020)
- Kuschel, T., "Solving the weighted capacitated planned maintenance problem and its variants", European Journal of Operational Research, 272(3), pp.847~858 (2019)
- 이진표, "이산 시간을 고려한 시스템의 교체와 수리 비용 최적화 연구", 한국산업경영시스템학회지, 43(1), pp.61~69 (2020), 한국산업경영시스템학회[DOI]
- 이주현, "대여 장비의 예방정비 일정 결정을 위한 의사 결정 모델 개발", 한국산업경영시스템학회지, 41(2), pp.24~31 (2018), 한국산업경영시스템학회[DOI]
- Lie, C. H., "An algorithm for preventive maintenance policy", IEEE Transactions on Reliability, 35(1), pp.71~75 (1986)
- Lin, D., "Sequential imperfect preventive maintenance models with two categories of failure modes", Naval Research Logistics, 48(2), pp.172~183 (2001)
- Malik, M. A. K., "Reliable preventive maintenance policy", AIIE Transactions, 11(3), pp.221~228 (1979)
- Mullor, R., "A modelling approach to optimal imperfect maintenance of repairable equipment with multiple failure modes", Computers and Industrial Engineering, 128, pp.24~31 (2019)
- Nakagawa, T., "A summary of maintenance policies for a finite interval", Reliability Engineering and System Safety, 94(1), pp.89~96 (2009)
- Nakagawa, T., "Imperfect preventive maintenance", IEEE Transactions on Reliability, 28(5), pp.402~ (1979)
- Nakagawa, T., "A summary of periodic and random inspection policies", Reliability Engineering and System Safety, 95(8), pp.906~911 (2010)
- Nakagawa, T., "Optimum policies when preventive maintenance is imperfect", IEEE Transactions on Reliability, 28(4), pp.331~332 (1979)
- Ohnishi, M., "An optimal inspection and replacement policy for a deteriorating system", Journal of Applied Probability, 23(4), pp.973~988 (1986)
- Ozekici, S., "Optimal periodic replacement of multicomponent reliability systems", Operations Research, 36(4), pp.542~552 (1988)
- Park, J. H., "Stress-reducing preventive maintenance model for a unit under stressful environment", Reliability Engineering and System Safety, 108, pp.42~48 (2012)
- Park, J. H., "An optimal block preventive maintenance policy for a multiunit system considering imperfect maintenance", Asia-Pacific Journal of Operational Research, 26(6), pp.831~847 (2009)
- 박종훈, "가혹환경 하에서 사용되는 시스템의 외부환경보수에 대한 고장률 모형", 대한산업공학회지, 36(1), pp.69~77 (2010), 대한산업공학회
- 박종훈, "직접보수와 간접보수를 함께 고려하는 예방보수모형 소프트웨어의 검증 및 활용", 신뢰성 응용연구, 20(1), pp.72~83 (2020), 한국신뢰성학회[DOI]
- Pham, H., "Imperfect maintenance", European Journal of Operational Research, 94(3), pp.425~438 (1996)
- Qiu, Q., "Optimal maintenance policy considering maintenance errors for systems operating under performance-based contracts", Computers and Industrial Engineering, 112, pp.147~155 (2017)
- Ritchken, P., "(m, T) group maintenance policies", Management Science, 36(5), pp.632~639 (1990)
- Shen, J., "Availability and optimal maintenance policy for systems degrading in dynamic environments", European Journal of Operational Research, 276(1), pp.133~143 (2019)
- Sheu, S., "A generalized group maintenance policy", European Journal of Operational Research, 96(2), pp.232~247 (1997)