원통형 이차전지의 저항용접 품질 향상을 위한 공정 최적화
Process Optimization for Improving Resistance Welding Quality of Cylindrical Secondary Battery
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Purpose: This study aims to determine the optimal conditions for the spot welding process that mechanically connects the case of a cylindrical secondary battery and the negative tab. Methods: We use 33 factorial design to derive the optimal conditions for the spot welding process. The pulling strength, the cross-sectional area of nugget, and the shock test life are selected as response variables, which can represent the resistance welding quality. The input variables are selected as the welding time, welding voltage, and pressure, which are the controllable factors in the spot welding process. Results: The main effects of welding time and welding voltage and the interaction effect of welding time and welding voltage are significant. Conclusion: The optimal conditions for the spot welding process to mechanically join the negative electrode tab of the cylindrical secondary battery and the battery case are developed. The result shows that the pulling strength is increased by 44% compared to before improvement under optimal conditions.
Abstract
Purpose: This study aims to determine the optimal conditions for the spot welding process that mechanically connects the case of a cylindrical secondary battery and the negative tab. Methods: We use 33 factorial design to derive the optimal conditions for the spot welding process. The pulling strength, the cross-sectional area of nugget, and the shock test life are selected as response variables, which can represent the resistance welding quality. The input variables are selected as the welding time, welding voltage, and pressure, which are the controllable factors in the spot welding process. Results: The main effects of welding time and welding voltage and the interaction effect of welding time and welding voltage are significant. Conclusion: The optimal conditions for the spot welding process to mechanically join the negative electrode tab of the cylindrical secondary battery and the battery case are developed. The result shows that the pulling strength is increased by 44% compared to before improvement under optimal conditions.
참고문헌 (19)
- 변재현, "혼합물 소재의 난연성 향상을 위한 실험연구 사례", 품질경영학회지, 47(3), pp.631~639 (2019), 한국품질경영학회[DOI]
- 장희석, "저항 점용접의 모니터링 - 전극팽창신호와 서보건 응용기법에 대하여-", 대한용접접합학회지, 30(1), pp.19~26 (2012), 대한용접접합학회
- Cho, S. M, "Principle of Resistance Welding and Analysis of Monitoring Results", Journal of the Korean Welding and Joining Society, 15(2), pp.1~10 (1997)
- Cho, S. W., "A Development of Q-MEXS for In-Line Quality Monitoring in Resistance Welding", International Welding, 2004, 24~26
- Cho. H. S., "Welding Quality Supervision and Control in Resistance Welding Processes", Journal of the Korean Welding and Joining Society, 18(4), pp.11~19 (2000)
- Hong, M, S., "A Study on the Evaluation of Weldability in Spot Welding", Proceedings of the International Conference of Manufacturing Technology Engineers, pp.301~306 (2003)
- 황동수, "실시간 용접품질 모니터링 시스템의 개발 및 적용 동향", 대한용접접합학회지, 30(1), pp.44~50 (2012), 대한용접접합학회
- 정인준, "쌍대반응표면최적화를 위한 반복적 선호도사후제시법", 품질경영학회지, 40(4), pp.481~496 (2012), 한국품질경영학회[DOI]
- Khaldoun K. T., "A Ddesign of Experiments Approach for Optimizing an Extrusion Blow Molding Process", Journal of Quality in Maintenance Engineering, 10(1), pp.47~54 (2004)
- Kim, G. C., "Effect of Process Parameters of Heat Input Efficiency in Condenser Discharge Welding", Proceedings of the Korean Welding and Joining Society, pp.3~5 (1996)
- 김태형, "자동차 차체 제조 공정에서 용접 공정 오류 검출을 위한 지능형 모니터링 시스템 개발", 대한용접접합학회지, 28(4), pp.81~86 (2010), 대한용접접합학회
- Ko, M. H., "The Comparison of Average Dynamic Resistance and Instantaneous Dynamic Resistance Pattern during Half-Cycle for the Heat Generation Phenomena in Resistance Welding", Proceedings of the Korean Welding and Joining Society, pp.305~307 (2005)
- Ko, M. H., "Comparison and Observation of Heating Phenomena by High Speed Camera and Waveform Monitoring in Spot Welding with Various Power Sources", Proceedings of the Korean Welding and Joining Society, pp.80~82 (2006)
- 이동헌, "실험계획법을 이용한 전자부품 위치정렬장치 최적 운영조건 사례연구", 품질경영학회지, 43(3), pp.453~466 (2015), 한국품질경영학회[DOI]
- 이상필, "실험계획법을 이용한 압출공정의 최적화", 대한설비관리학회지, 24(2), pp.13~21 (2019), 대한설비관리학회
- "Lithium-ion battery" (2018)[URL]
- Park, J. H., "The On-Line Quality Monitoring for Resistance Spot Welding Using the Pressure Pattern", Proceedings of the Korean Society for Precision Engineering, pp.461~464 (1999)
- "Recall of the Samsung Galaxy Note 7" (2018)[URL]
- "What is a Secondary Battery"[URL]