동특성 다구찌 기법을 통한 Cu합금 와이어의 스폿용접 품질향상 연구
A Study on the Improvement of Spot Welding Quality of Wire Cu Alloy by Taguchi Method for Dynamic Characteristics
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study is to find the optimum working conditions for spot welding of wire Cu alloys to achieve high-level quality. The parts subject to spot welding are brush card assemblies, which are the main module of the electric movement method of the car seat. Methods: In this study, the signal-to-noise ratio(SN ratio) and the loss function [L(y)] are used as Taguchi method for dynamic characteristics. Results: The results of the study are as follows. First, the analysis of variance using SN ratio showed 6 significant factors(p = 0.1% or less) among 7 factors except press force. Second, the optimal design of the dynamic characteristics is the tip exchange cycle: 50,000 ea., the welding time is 110 ms, the pressing force is 11 kgf/cm2, the rise time is 40 ms, and the tip dressing is 3,000 ea., Tip angle is 12o and electric current is 1,800 A. Conclusion: The validity of the spot welding process of the manufacturer's brush card assembly was verified and proved to be consistent with the study results. The results of this study are expected to standardize the welding conditions and guarantee the quality level required by the customers.
Abstract
Purpose: The purpose of this study is to find the optimum working conditions for spot welding of wire Cu alloys to achieve high-level quality. The parts subject to spot welding are brush card assemblies, which are the main module of the electric movement method of the car seat. Methods: In this study, the signal-to-noise ratio(SN ratio) and the loss function [L(y)] are used as Taguchi method for dynamic characteristics. Results: The results of the study are as follows. First, the analysis of variance using SN ratio showed 6 significant factors(p = 0.1% or less) among 7 factors except press force. Second, the optimal design of the dynamic characteristics is the tip exchange cycle: 50,000 ea., the welding time is 110 ms, the pressing force is 11 kgf/cm2, the rise time is 40 ms, and the tip dressing is 3,000 ea., Tip angle is 12o and electric current is 1,800 A. Conclusion: The validity of the spot welding process of the manufacturer's brush card assembly was verified and proved to be consistent with the study results. The results of this study are expected to standardize the welding conditions and guarantee the quality level required by the customers.
참고문헌 (11)
- Cho, Sangmyung, "Principle of resistance welding and analysis of monitoring results", Journal of the Korean Welding & Joining Society, 15(2), pp.1~ (1997)
- Huh, Dongwoon, "The Optimization of Welding Parameters and Lobe Curve Expansion by changing Current Profile in Inverter DC Resistance Spot Welding", Master, pp.2009
- 조범지, "저항점용접된 Al5052", DP590 이종소재의 특성평가 및 공정의 최적화, 2015, pp.33(2), 56~61[DOI]
- Kang, Changgu, "Study on the Application of Optimization Method in Resistance Spot Welding for Enhancement of Quality and Reliability", pp.2015
- Kang, Sungkwan, "A Novel Control Method of Resistance Spot Welding Inverter using Dynamic Resistance Characteristics for Welding Quality Improvement", Ph.D, pp.2016
- Kim, Hyunjoong, "A Study on the Optimization of Welding Conditions for 3-sheet including 1.5GPa Grade Steel for Automotive in RSW", Master, pp.2015
- Park, Kyungjin, "Fundamentals and Applications of Taguchi Method", Welding and Cementing Society of Korea Welding Engineering Summer School Textbook, 1, pp.127~144 (2000)
- Park, Sunghyun, "Optimization of Resistance Spot Welding Process Parameter and Weldability Evaluation for TRIP Steel", Special lectures and conferences of the Korean Welding Society, pp.19~21 (2002)
- Shim, Junghyun, "DB Construction and Development of Auto-selecting Algorithm to determine Welding Condition for Spot Welding in Car body", Master, pp.2011
- Suk, Hosam, "The Experimental Research on the Spot Welding Properties of Cold Rolled Carbon Steel Sheets(SCP-1)Zn coation", Master, pp.1995
- Yoon, Hanki., "Strength Characteristics for Various Spot Welding Conditions in 7075-T6 Aluminum Alloy Sheets", Special lectures and conferences of the Korean Welding Society, 1(1), pp.216~218 (1999)