극저온에서 풍속의 영향에 따른 발열기자재의 최적설계
Optimum Design of the Heating Equipment by Influence of Wind Speed at Cryogenic Temperature
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study is to evaluate the performance of heating equipments by implementing the extreme environment in which ships navigating the ice zone are exposed and to study and apply the experimental method to infer the optimized design for each factors. Methods: It is required to verify by analysis and experiment how the environment with low temperature and wind speed implemented through the test facility affects the heating walk-way and The optimum design of the heating walk-way in that extreme environment is derived using the Taguchi technique. Results: The results of this study are as follows; It was found the effect on the condition of each factor and derive optimized conditions that satisfy the performance condition of the heating walk-way in extreme use environment. Conclusion: Ships operating in Polar waters require reliable and durable facilities for all environments during sailing.
Abstract
Purpose: The purpose of this study is to evaluate the performance of heating equipments by implementing the extreme environment in which ships navigating the ice zone are exposed and to study and apply the experimental method to infer the optimized design for each factors. Methods: It is required to verify by analysis and experiment how the environment with low temperature and wind speed implemented through the test facility affects the heating walk-way and The optimum design of the heating walk-way in that extreme environment is derived using the Taguchi technique. Results: The results of this study are as follows; It was found the effect on the condition of each factor and derive optimized conditions that satisfy the performance condition of the heating walk-way in extreme use environment. Conclusion: Ships operating in Polar waters require reliable and durable facilities for all environments during sailing.
참고문헌 (23)
- AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC, "ANSI", AMCA Standard 500-L-07 Laboratory Methods of Testing Louvers for Rating, 2016
- Bureau Veritas, "Pt E, Ch10, Section 11 Cold Weather Condition", ~ (2015)
- Det Norske Veritas, "DNV-OS-A201 Winterization for Cold Climate Operations (Tentative)", ~ (2013)
- Heated Walk Way (10XTV2, "12Lines, 10XTV2", 20Lines) Test Report, pp.2016, ~
- International Electrotechnical Commission, "IEC 60068-3-5 Environmental Testing – Part 3-5: Supporting Documentation and Guidance – Confirmation of the Performance of Temperature Chambers", ~ (2001)
- International Electrotechnical Commission, "IEC 60068-2-1 Environmental Testing – Part 2-1: Tests – Test A: Cold", ~ (2017)
- International Organization for Standardization, "ISO", DIS 18215 Ships and Marine Technology – Vessel Machinery Operations in Polar Waters – Guidelines, 2014
- International Organization for Standardization, "ISO 17713-1 Meteorology – Wind Measurements – Part 1: Wind Tunnel Test Methods for Rotating Anemometer Performance", ~ (2017)
- 지수윤, "에너지 전환 이상기능 기반 다구찌 동특성을 활용한 Fan Case 설계", 대한산업공학회지, 41(1), pp.97~104 (2015), 대한산업공학회[DOI]
- Kim, Donghyun, "Analysis of Low Temperature Performance Heat Transfer of Deck Equipment and Materials for Ice Ships", pp.2016
- 김성준, "다구치의 동적 강건설계와 그 대안에 관한 고찰", 대한산업공학회지, 39(5), pp.351~360 (2013), 대한산업공학회[DOI]
- Korean Industrial Standards, "KS P 8202 Anemometer for General Use", ~ (2006)
- Korean Industrial Standards, "KS I ISO 16622 Meteorology ― Sonic Anemometers", Thermometers ― Acceptance Test Methods for Mean wind Measurements, 2008
- Korean Industrial Standards, "KS V 0940 TestingPprocedure for Deck Equipments of Vessel Intended for Cold Climate Region", ~ (2014)
- 권혁무, "다구치 방법의 강점 및 약점에 대한 사례 연구", 대한산업공학회지, 39(5), pp.383~392 (2013), 대한산업공학회[DOI]
- Lloyd’s Register, "Provisional Rules for Winterization of Ships", ~ (2015)
- A Case Study of Performance Test for Anti-icing Deck Equipment in Arctic Marine Plant and Polar Class Vessel, "Oh, Suyoun", The Okhotsk Sea & Cold Ocean Research Association, ~ (2016)
- 신혁, "다구찌기법을 이용한 컬러필터용 고형분 제작의 공정조건 최적화에 관한 연구", 석사, 경영정책, pp.2007
- SHEET METAL & AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION, "HVAC SYSTEMS Testing, Adjusting & Balancing" (2002)
- Taguchi Kenichi, "Experimental Planning Method for Quality Design" (1991), Japanese Standards Association
- Taguchi Kenichi, "Quality Engineering in Development and Design Phase" (1991), Japanese Standards Association
- THERMON, "Electric Heat Tracing Maintenance and Troubleshooting Guide", ~ (2015)
- 염봉진, "다구치 강건설계 방법 : 현황과 과제", 대한산업공학회지, 39(5), pp.325~341 (2013), 대한산업공학회[DOI]