이종결합 고속회전 발사 탄의 비행 안정성에 결합력이 미치는 영향성 분석
Analysis of How the Bonding Force between Two Assemblies Affects the Flight Stability of a High-speed Rotating Projectile
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: We sought to understand why a high-speed rotating projectile featuring a fuze-and-body assembly sometimes exhibited airburst, and we intended to improve the flight stability by eliminating airburst. Methods: We performed characteristic factor analysis, structural mechanics modeling, and dynamic modeling and simulation; and we scheduled firing tests to discover the cause of airburst. We used a step-by-step procedure to analyze the reliability function for selecting the bonding force standard that prevents airburst. Results: The 00MM high-speed rotating projectile features a fuze bonded to a body assembly; the bonding sometimes can break on firing. The resulting contact force, vibration and roll damping during flight generated yaw. Flight became unstable; fuze operation triggered an airburst. Our reliability test improved the bonding force standard (the force was increased). When the bonding force was at least the minimum required, a firing test revealed that airburst/flight instability disappeared. Conclusion: Analysis and identification of the causes of flight instability and airburst render military training safer and enhance combat power. Ammunition must perform as designed. Our method can be used to set standards that improve the performances of similar types of ammunition.
Abstract
Purpose: We sought to understand why a high-speed rotating projectile featuring a fuze-and-body assembly sometimes exhibited airburst, and we intended to improve the flight stability by eliminating airburst. Methods: We performed characteristic factor analysis, structural mechanics modeling, and dynamic modeling and simulation; and we scheduled firing tests to discover the cause of airburst. We used a step-by-step procedure to analyze the reliability function for selecting the bonding force standard that prevents airburst. Results: The 00MM high-speed rotating projectile features a fuze bonded to a body assembly; the bonding sometimes can break on firing. The resulting contact force, vibration and roll damping during flight generated yaw. Flight became unstable; fuze operation triggered an airburst. Our reliability test improved the bonding force standard (the force was increased). When the bonding force was at least the minimum required, a firing test revealed that airburst/flight instability disappeared. Conclusion: Analysis and identification of the causes of flight instability and airburst render military training safer and enhance combat power. Ammunition must perform as designed. Our method can be used to set standards that improve the performances of similar types of ammunition.
참고문헌 (14)
- AMCCOM, "MAINTENANCE ENGINEERING QUARTERLY REPORT 1 JANUARY-31 MARCH 1987", U.S. ARMY ARMAMENT MUNITIONS AND CHEMICAL COMMAND, 136~ (1987)
- Hung-Joo Lee, "Gun and Ballistics", pp.131~240 (2001), Chung Moon Gak
- 김형진, "풀림 방지 너트의 조임력 특성에 대한 실험적 연구", 한국철도학회논문집, 21(1), pp.1~10 (2018), 한국철도학회
- 신재혁, "항공기용 유압작동기 수분유입 방지를 위한 품질개선 사례", 품질경영학회지, 47(3), pp.467~478 (2019), 한국품질경영학회[DOI]
- 최재영, "신뢰성 있는 파이로테크닉 분리 너트 설계를 위한 진동 시볼트 풀림 해석", 한국항공우주학회지, 46(12), pp.1004~1011 (2018), 한국항공우주학회
- Junbo ZHOU, "Anti-loosening performance of coatings on fasteners subjected to dynamic shear load", Journals of Tsinghua University Press. Friction, 6(1), pp.32~46 (2018)
- 박영민, "군용장갑차 및 자주포용 송풍기의 내구수명 향상에 대한 연구", 품질경영학회지, 47(3), pp.453~465 (2019), 한국품질경영학회[DOI]
- RDECOM, "Desk Evaluation of MIF-A-056-2009 for Cartridge, 40MM : HEDP, M430-Airburst", U.S. ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND, ~ (2009)
- 오세윤, "회전발사체 미익형상 롤댐핑 특성에 관한 실험연구", 한국항공우주학회지, 40(10), pp.894~900 (2012), 한국항공우주학회
- 신재원, "볼트액션 작동방식 단발형 소총의 비정상 작동에 관한 개선 연구", 품질경영학회지, 47(3), pp.417~424 (2019), 한국품질경영학회[DOI]
- Stephen, J., "Relaxation of contact pressure and self-loosening in dynamic bolted joints", Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, 231(18), pp.3462~3475 (2017)
- 신귀수, "볼트 결합부 풀림에 관한 마찰 특성(제 I 보 : 나사 마찰 실험)", 한국안전학회지, 18(2), pp.1~5 (2003), 한국안전학회
- Yoo, jaehan, "Technology Trend of Bolt Locking Methods", Current industrial and Technological Trends in Aerospace, 16(1), pp.111~117 (2018)
- 오영탁, "나사 풀림 방지를 위한 걸림턱 구조의 와셔 개발 및 성능 비교", 한국기계가공학회지, 19(8), pp.28~34 (2020), 한국기계가공학회[DOI]