의료용 할로겐램프의 가속수명시험에 관한 연구
A Study on Accelerated Life Test of Halogen Lamps for Medical Device
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study was to estimate life time of halogen lamps and acceleration factors using accelerated life test. Methods: Voltage was selected as an accelerating variable through the technical review about failure mechanism. The test was performed at 14.5V, 15.5V and 16.5 for 4,471 hours. It was assumed that the lifetime of Halogen lamps follow Weibull distribution and the inverse power life-stress relationship models. Results: Mean lifetimes of pin and screw types were 19,477 hours and 6,056 hours, respectively. In addition,acceleration factor of two items are calculated as 4.8 and 2.2 based on 15.5V, respectively. Conclusion: The life-stress relationship, acceleration factor, and MTTF at design condition are estimated by analyzing the accelerated life test data. These results suggest that voltage was very important factor to accelerate life time in the case of halogen lamps and the life time of pin type is three times longer than screw type lamps.
Abstract
Purpose: The purpose of this study was to estimate life time of halogen lamps and acceleration factors using accelerated life test. Methods: Voltage was selected as an accelerating variable through the technical review about failure mechanism. The test was performed at 14.5V, 15.5V and 16.5 for 4,471 hours. It was assumed that the lifetime of Halogen lamps follow Weibull distribution and the inverse power life-stress relationship models. Results: Mean lifetimes of pin and screw types were 19,477 hours and 6,056 hours, respectively. In addition,acceleration factor of two items are calculated as 4.8 and 2.2 based on 15.5V, respectively. Conclusion: The life-stress relationship, acceleration factor, and MTTF at design condition are estimated by analyzing the accelerated life test data. These results suggest that voltage was very important factor to accelerate life time in the case of halogen lamps and the life time of pin type is three times longer than screw type lamps.
참고문헌 (30)
- Abd-Elfattah, A. M., "Estimation in Step-Stress Partially Accelerated Life Tests for the Burr Type XII Distribution using Type I Censoring", Statistical Methodology, 5(6), pp.502~514 (2008)
- Bai, D. S., "Optimal Design of Partially Accelerated Life Tests for the Exponential Distribution under Type-I Censoring", IEEE Transactions on Reliability, 41, pp.400~406 (1992)
- Bai, D. S., "Optimal Design of Partially Accelerated Life Tests for the Log Normal Distribution under Type-I Censoring", Reliability Engineering and System Safety, 40, pp.193~210 (1993)
- Balarkishnan, N., "Exact Inference for a Simple Step-Stress Model with Type-I Hybrid Censored Data from the Exponential Distribution", Journal of Statistical Planning and Inference, 137(11), pp.3268~3290 (2007)
- Cayless, M. A., "Lamps and lighting", pp.177~193 (1997), Arnold
- Chernoff, H, "Optimal Accelerated Life Designs for Estimation", Technometrics, 4, pp.381~408 (1962)
- Chun, Y. H., "Accelerated Life Test and Data Analysis of the Silver Through Hole Printed Wiring Board", Journal of the Korean Society for Quality Management, 25(2), pp.15~27 (1997)
- Escobar, L. A., "Planning Accelerated Life Tests with Type II Censored Data", Journal of Statistical Computation and Simulation, 23, pp.273~297 (1986)
- Fard, N., "Optimal Simple Step-Stress Accelerated Life Test Design for Reliability Prediction", Journal Statistical Planning and Inference, 139(5), pp.1799~1808 (2009)
- Jeong, H. R., "Degradation Analysis of Tungsten filament in Automotive Halogen Lamp", Proceedings of the KSME conference, pp.2143~2148 (2010)
- Khamis, I. H, "Optimum M-Step, Step Stress Design with K Stress Variables", Communications in Statistics-Simulation and Computation, 26, pp.1301~1313 (1997)
- Kim, C. S., "Lifetime Estimation of an Automative Halogen Lamp", Proceedings of the KSME conference, pp.1259~1264 (2008)
- Lee, Y. S., "Lifetime decrease of halogen lamps for Automotive Headlighting by Field Stress", Proceedings of the KSME, pp.134~136 (2010)
- 임헌상, "열화가 Wiener process를 따르는 경우의 비용을 고려한 가속열화시험 계획", 품질경영학회지, 40(2), pp.117~125 (2012), 한국품질경영학회[DOI]
- Liu, X., "Planning Sequential Constant-Stress Accelerated Life Tests with Stepwise Loaded Auxiliary Acceleration Factor", Journal of Statistical Planning and Inference, 140, pp.1968~1985 (2010)
- Maciejewski, H, "Accelerated Life Test Data Analysis with Generalized Life Distribution Function and with No Aging Model Assumption", Microelectronics Reliability, 35(7), pp.1047~1051 (1995)
- Miller, R., "Optimal Simple Step-Stress Plans for Accelerated Life Testing", IEEE Transaction on Reliability, 32, pp.59~65 (1983)
- 문지섭, "정수기용 부스터펌프의 가속수명시험", 신뢰성 응용연구, 11(3), pp.281~291 (2011), 한국신뢰성학회
- Nelson, W., "Accelerating Test: Statistical Models, Test Plans and Data Analysis" (1990), John Wiley and Sons
- Nelson, W., "Theory for Optimum Censored Accelerated Tests for Normal and Lognormal Life Distribution", Technometrics, 18, pp.105~114 (1976)
- Park, J. W., "Optimal Design of Partially Accelerated Life Tests with Two Stresses", Naval Research Logistics, 43, pp.863~884 (1996)
- Seo, J. H., "Design of Accelerated Life Test Sampling Plans with a Nonconstant Shape Parameter", European Journal of Operational Research, 197, pp.659~666 (2009)
- Seo, S. K., "Optimal Design of Accelerated Life Tests under Model Uncertainty", Journal of the Korean Society for Quality Management, 29(3), pp.49~65 (2001)
- Seo, S. K., "Reliability Engineering" (2010), Kyobomungo
- Seo, S. K., "Accelerated Life Test Plans under Intermittent Inspection and Type I Censoring: The Case of Weibull Failure Distribution", Naval Research Logistics, 38, pp.1~22 (1991)
- Srivastava, P. W., "Optimum Step-Stress Accelerated Life Test for the Truncated Logsitic Distribution with Censoring", Applied Mathematical Modelling, 34(10), pp.3166~3178 (2010)
- Tang, L. C., "Planning Accelerated Life Tests with Three Constant Stress Levels", Computers and Industrial Engineering, 42, pp.439~446 (2002)
- Tang, L. C., "A Multiple Objective Framework for Planning Accelerated Life Tests", IEEE Transactions on Reliability, 54, pp.58~63 (2005)
- Yun, W. Y., "Optimum Progressive-Stress Accelerated Life Test", Journal of the Korean Institute of Industrial Engineers, 19, pp.15~21 (1993)
- Wu, S. J., "Optimal Step-Stress Test under Type I Progressive Group-Censoring with Random Removals", Journal of Statistical Planning and Inference, 138, pp.817~826 (2008)