상태기반정비 요구도 국방규격 반영에 관한 연구
A Study on the Reflection of Condition-Based Maintenance Requirement in the Defense Specification
0
조회
0
다운로드
11
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study was to suggest weapon system specifications for requirements of Condition-Based Maintenance(CBM/CBM+). Methods: The military documents and case studies with regard to condition-based maintenance were reviewed. Representative Korea defense specifications of weapon system such as an aircraft, a C4ISR etc. were analyzed and investigated the level of requirement for maintainability was. Results: Condition-based maintenance was defined in both U.S. instruction and Korean directive. While deparment of defense(U.S.) provide a guidebook for CBM+, detailed instruction was not sufficient for Korean. Ministry of national defense(ROK) define the CBM+ by means of IPS element which should be developed along with the system development. The maintainability was barely included in Korean defense specifications, except for BIT(Built-in test) function. As a first step for defining the condition-based maintenance requirement in defense specification, this study suggests a standard form for data needed to acquire according to types of system, fault, failure, and so on. Conclusion: The empirical researches on CMB/CBM+ with domestic weapon systems are not enough, and a logic which leads the maintenance strategy to CMB/CBM+ is not solved. Through technical researches and institutional improvements including this study, we hope that condition-based maintenance would be fully established in the Korean defense field.
Abstract
Purpose: The purpose of this study was to suggest weapon system specifications for requirements of Condition-Based Maintenance(CBM/CBM+). Methods: The military documents and case studies with regard to condition-based maintenance were reviewed. Representative Korea defense specifications of weapon system such as an aircraft, a C4ISR etc. were analyzed and investigated the level of requirement for maintainability was. Results: Condition-based maintenance was defined in both U.S. instruction and Korean directive. While deparment of defense(U.S.) provide a guidebook for CBM+, detailed instruction was not sufficient for Korean. Ministry of national defense(ROK) define the CBM+ by means of IPS element which should be developed along with the system development. The maintainability was barely included in Korean defense specifications, except for BIT(Built-in test) function. As a first step for defining the condition-based maintenance requirement in defense specification, this study suggests a standard form for data needed to acquire according to types of system, fault, failure, and so on. Conclusion: The empirical researches on CMB/CBM+ with domestic weapon systems are not enough, and a logic which leads the maintenance strategy to CMB/CBM+ is not solved. Through technical researches and institutional improvements including this study, we hope that condition-based maintenance would be fully established in the Korean defense field.
참고문헌 (32)
- Adhikari PP, "A framework for aircraft maintenance strategy including CBM", Proceedings of European Conference of the Prognostics and Health Management, 3(1), pp.1~10 (2016)
- 최창현, "군수품의 고품질 확보를 위한 개발 품질보증 적용사례 연구", 품질경영학회지, 47(1), pp.151~162 (2019), 한국품질경영학회[DOI]
- DAPA(Defense Acquisition Program Administration), "Korean defense specification: radar set, local air defense", ~ (2017)
- DAPA(Defense Acquisition Program Administration), "Korean defense specification: helicopter, utility", ~ (2020)
- DAPA(Defense Acquisition Program Administration), "Korean defense specification: gun, air defense artillery, 30mm, wheeled, self-propelled", 30~ (2021)
- DAPA(Defense Acquisition Program Administration), "Korean defense specification: thermal imaging system", ~ (2021)
- DoD(Department of Defense)., "Condition Based Maintenance Plus DoD Guidebook", ~ (2008)
- DoD(Department of Defense), "Instruction 4151.22 Condition-Based Maintenance Plus for Materiel Maintenance", ~ (2020)
- Gang Niu, "Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance", Reliability Engineering and System Safety, 95(7), pp.786~796 (2010)
- 조규선, "유도무기 탑재 궤도차량 변속기의 CBM+ 창정비에 관한 실증 연구", 한국국방경영분석학회지, 47(1), pp.46~62 (2021), 한국국방경영분석학회[DOI]
- 정일호, "무기체계 개발단계 품질관리 강화에 관한 사례 연구", 품질경영학회지, 45(3), pp.349~364 (2017), 한국품질경영학회[DOI]
- Kilby TS, "Enabling condition based maintenance with health and usage monitoring systems", Proceedings of 7th DSTO international conference on Health and Usage Monitoring (2011)
- 김근영, "군수용 고정익 항공기 구성품 PHM 적용을 위한 기술 요소 획득 로드맵 구성 및 구성품 선정단계 검증", 한국항공우주학회지, 47(9), pp.665~677 (2019), 한국항공우주학회
- 김성준, "인더스트리 4.0을 위한 고장예지 기술과 가스배관의 사용적합성 평가", 품질경영학회지, 45(4), pp.649~664 (2017), 한국품질경영학회[DOI]
- Kumar S, "Condition based maintenance of bearing and gears for fault detection-a review", Materials today : Proceedings, 5(2), pp.6128~6237 (2018)
- MND(Ministry of National Defense), "Directive on defense force development", ~ (2021)
- MND(Ministry of National Defense), "Directive on total life cycle management", ~ (2021)
- 박영민, "군용장갑차 및 자주포용 송풍기의 내구수명 향상에 대한 연구", 품질경영학회지, 47(3), pp.453~465 (2019), 한국품질경영학회[DOI]
- Powrie H, "Gas path debris monitoring for F-35 Joint Striker Fighter propulsion system PHM", Proceedings of aerospace conference IEEE (2006), MT USA
- Rabeno E, "Condition based maintenance of military ground vehicles", Proceedings of aerospace conference IEEE (2009), MT USA
- Seo BS, "Introduction of the 4th industrial revolition and seccess stories through PHM technology", Journal of the Korean Society of Mechanical Engineers, 59(1), pp.32~37 (2019)
- 서원범, "QMST", QCG 제도를 통한 잠수함 함정 체계개발단계 방법론 연구, 2020, pp.48(3), 521~534[DOI]
- 서명교, "오토인코더를 이용한 열간 조압연설비 상태모니터링과 진단", 품질경영학회지, 47(1), pp.75~86 (2019), 한국품질경영학회[DOI]
- 서윤호, "상태지수 통계적 추정을 이용한 베어링 수명 예측", 한국소음진동공학회논문집, 28(3), pp.339~347 (2018), 한국소음진동공학회[DOI]
- Serradilla O, "Interpreting remaining useful life estimations combining explainable artificial intelligence and domain knowledge in industrial machinery", Proceedings of IEEE international conference on Fuzzy Systems (2020)
- Shin JK, "On condition based maintenance policy", Journal of Computational Design and Engineering, 2(2), pp.119~227 (2015)
- Teixeira HN, "Condition-based maintenance implementation : a literature review", Procedia Manufacturing, 51, pp.228~235 (2020)
- Tinga T, "Predictive maintenance of military systems based on physical failure models", Chemical Engineering Transactions, 33, pp.295~300 (2013)
- Vachtsevanos G, "Intelligent fault diagnosis and prognosis for engineering systems" (2006), John Wiley and Sons Inc
- Wang Y, "Remaining useful life prediction using deep learning approaches : a review", Procedia Manufacturing, 49, pp.81~88 (2020)
- Xiang L, "Remaining useful life estimation in prognostics using deep convolution neural networks", Reliability Engineering and System Safety, 172, pp.1~11 (2018)
- Yu BY, "A maintenance-focused approach to complex system design. Artificial Intelligence for Engineering Design", Analysis and Manufacturing, 30(3), pp.263~276 (2016)