국산훈련기 신뢰성기반 정비주기 연장방안 연구
A Study for Maintenance Period Extensionbased on Reliability of Korea Trainer
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Currently, there are two types of trainer in Korea : basic and advanced. Both models have been in operation for more than 10 years, and compared to the early stage of operation, reliability has gradually improved and failure rates have also entered a trend of stabilization. Therefore, it is necessary to extend the maintenance period considering economic feasibility. This study investigates the three maintenance period calculation methods: NAVAIR 00-25-403 [17], DOD, U.S. [4], CERL and US Army [3], with intention to extend the maintenance period of the trainer from current 200 hours to 400 hours. In addition, the maintenance period was calculated by the three methods with actual operational data. Common standards and procedures were established to apply operational data to the existing maintenance period calculation methods, the required reliability indicators were derived, and the maintenance periods was calculated based on the results, additionally, a review on the field applicability of the three maintenance cycles was conducted. An on-site interviews were conducted with the calculation results, and 11 out of the 15 items were expected to be extended by 400 hours. It was suggested that the remaining 4 items could be extended to 400 hours by supplementing the inspection method through additional analysis such as functional analysis, inspection content verification, and site connection.
Abstract
Currently, there are two types of trainer in Korea : basic and advanced. Both models have been in operation for more than 10 years, and compared to the early stage of operation, reliability has gradually improved and failure rates have also entered a trend of stabilization. Therefore, it is necessary to extend the maintenance period considering economic feasibility. This study investigates the three maintenance period calculation methods: NAVAIR 00-25-403 [17], DOD, U.S. [4], CERL and US Army [3], with intention to extend the maintenance period of the trainer from current 200 hours to 400 hours. In addition, the maintenance period was calculated by the three methods with actual operational data. Common standards and procedures were established to apply operational data to the existing maintenance period calculation methods, the required reliability indicators were derived, and the maintenance periods was calculated based on the results, additionally, a review on the field applicability of the three maintenance cycles was conducted. An on-site interviews were conducted with the calculation results, and 11 out of the 15 items were expected to be extended by 400 hours. It was suggested that the remaining 4 items could be extended to 400 hours by supplementing the inspection method through additional analysis such as functional analysis, inspection content verification, and site connection.
참고문헌 (22)
- "AFMCI 21-103, Reliability-Centered Maintenance(RCM)Programs", ~ (1993)
- Barlow, R., "Mathematical theory of reliability" (1996), Society for Industrial and Applied Mathe- matics
- CERL, "Technical Report-Reliability Centered Maintenance(RCM) Guide", ~ (1993)
- DOD, U.S., "DoD guide for achieving Reliability, Avail- ability", ~ (2005)
- 한영희, "국방획득정책과 T-50 고등훈련기 연구개발의 성공사례", 한국혁신학회지, 7(1), pp.115~135 (2012), 한국혁신학회[DOI]
- "JA1012, S.A.E., A Guide to the Reliability-Centered Maintenance(RCM) Standard", The Engineering Society for Advancing Mobility Land, Sea. Air, and Space, ~ (2002)
- 전태보, "항공기 유형을 고려한 최적 예비엔진 및 모듈 소요 산출", 한국시뮬레이션학회 논문지, 26(3), pp.35~46 (2017), 한국시뮬레이션학회[DOI]
- 조인탁, "항공전자장비의 운용자료 분석을 통한 신뢰성 성장 연구", 한국산업경영시스템학회지, 36(4), pp.100~108 (2013), 한국산업경영시스템학회
- 김근원, "위험도평가 기반의 항공기 구조물 RCM 적용 방안 연구", 한국항공경영학회지, 11(1), pp.61~74 (2013), 한국항공경영학회
- Mann, N. R., "Methods for statistical analysis of reliability and life data" (1974), Wiley
- "MIL-HDBK-217F Notice 2, Military Handbook, Reli- ability Prediction of Electronic Equipment", Department of Defense, ~ (1995)
- "MIL-HDBK-338B, Electronic Reliability Design Hand- book", ~ (1998)
- "MIL-STD-1843, Reliability-centered maintenance for air- craft, engines and equipment", ~ (1986)
- Moubray, J., "Reliability-centered maintenance" (2001), Industrial Press Inc.
- Nakagawa, T., "Maintenance theory of reliability" (2006), Sprin- ger Science & Business Media
- Nakagawa, T., "Random maintenance policies" (2014), Springer
- "NAVAIR 00-25-403, Guidelines for the Naval Aviation Reliability Centered Maintenance Process", ~ (1993)
- NAVAL SEA SYSTEMS COMMAND, "Reliability-Centerted Maintenance(RCM) Handbook, S9081-AB-GIB010", ~ (2007)
- Ryu, D., "Improving reliability and quality for product success" (2012), Crc Press
- Smith, A.M., "RCM-Gateway to world class maintenance" (2003), Elsevier
- 손영탁, "한국형 무인운전 고무차륜 AGT 시스템의 유지보수를 위한 신뢰성 기반의 고장 예방정비 시스템 개발에 관한 연구", 한국정밀공학회지, 27(5), pp.36~47 (2010), 한국정밀공학회
- Song, K.-T., "Application of Reliability based Inspection for an Effective RCM Approach of Railway System", Proceedings of the KSR Conference, The Korean Society for Railway, pp.1294~1300 (2008)