합성목재의 난연성 확보를 위한 혼합물 실험계획 사례

Abstract

Purpose: This paper addresses a case study of developing a flame retardant wood-plastic composites (WPC) by adding tannic acid to the existing synthetic wood. The optimal mixing ratios of six components are explored to minimize the burning time using two mixture designs. Methods: In the preliminary experiment, six components are considered to find important components and their ranges. Seven D-optimal mixture design points are generated. Two points are removed for the balance of plastic components to be maintained, and the remaining five points are augmented with two basic compositions. Four components are selected to be considered in the main experiment. In the main experiment, pellets are extruded at the eight mixture design points. In-house testing of burning time is executed three times. Specimens made of pellets from two promising flame retardant compositions are sent to the accredited laboratories and tested. Results: The test results are as follows: 1) The best composition (Wood flour, Tannic acid, PE, Lubricant) = (25, 41, 10, 2) (wt%) shows the burning time of 1 second, which is 9-fold improvement compared to the the burning time of 9 seconds from the existing composition (58, 0, 10, 2) (wt%). 2) The second best composition (41, 25, 10, 2) (wt%) results in the burning time of 2 seconds. This composition is inferior to the best composition in terms of the flame retardancy, but more economical since it needs less tannic acid ratio which is 100-fold expensive than the wood flour. Conclusion: Flame retardant compositions are found by adding tannic acid to the existing WPC employing optimal mixture designs. This case study will be helpful to practitioners who try to develop new products with additional physical properties with as small number of experimental trials as possible. Future research direction includes exploring conditions which satisfy both performance level and cost limitation simultaneously.