CIGS thin film solar cells by electrodeposition

키워드

참고문헌 (69)

1. M. Kemell, "Thin filmdeposition methods for CuInSe2 solar cells’", Crit. Rev.Solid State Mater. Sci, 30, pp.1~ (2005)
2. K. L. Chopra, "Thin filmsolar cells: an overview’", Prog. Photovolt. Res. Appl, 12, pp.69~ (2004)
3. M. A. Green, "The path to 25% silicon solar cell efficiency:history of silicon cell evolution’", Prog. Photovolt. Res.Appl, 17, pp.183~ (2009)
4. M. Grätzel, "Photovoltaic and photoelectrochemical conversionof solar energy’", Phil. Trans. R. Soc, 365, pp.993~ (2007)
5. R. L. Stolk, "Tandem and triple junction silicon thin filmsolar cells with intrinsic layers prepared by hot-wireCVD’", Thin Solid Films, 501, pp.256~ (2006)
6. M. A. Arturo, "Can we improve the record efficiency ofCdS", CdTe solar cells, 2006, pp.90, 2213~
7. I. Repins, "19.9%-efficient ZnO", CdS, Prog.Photovolt. Res. Appl, pp.2008, 16[DOI]
8. J. J. Loferski, "Theoretical considerations governing thechoice of the optimum semiconductor for photovoltaic solarenergy conversion’", J. Appl. Phys, 27, pp.777~ (1956)
9. S. Siebentritt, "Wide gap chalcopyrites: material propertiesand solar cells’", Thin Solid Films, 1, pp.403~404 (2002)
10. R. W. Birkmire, "Compound polycrystalline solar cells:Recent progress and Y2 K perspective’", Sol. Energy Mater.Sol. Cells, 65, pp.17~ (2001)
11. W. N. Shafarman, "Device and material characterization of Cu(InGa)Se2 solarcells with increasing band gap’", J. Appl. Phys, 79, pp.7324~ (1996)
12. CP462,NCP V Photovoltaics Program Review, "A. Jayapayalan", ~ (1999)
13. H. W. Schock, "CIGS-based solar cells forthe next millennium’", Prog. Photovolt. Res. Appl, 8, pp.151~ (2000)
14. S. Al. Alagappan, "Optimizing the design ofCIGS-based solar cells: a computational approach", Mater. Sci. Eng. B, 116, pp.293~ (2005)
15. T. Negami, "Real time composition monitoring methods inphysical vapor deposition of Cu(In,Ga)Se2 thin films", Mater. Res. Soc. Symp. Proc, 426, pp.267~ (1996)
16. M. A. Contreras, "Progress toward20% efficiency in Cu(In,Ga)Se2 polycrystalline thin-filmsolar cells’", Prog. Photovolt: Res. Appl, 7, pp.311~ (1999)
17. K. Ramanathan, "Properties of 19.2%efficiency ZnO", CdS, Prog.Photovolt: Res. Appl, pp.2003, 11[DOI]
18. K. Kushiya, "Progress in large-area Cu(InGa)Se2-basedthin-film modules with the efficiency of over 13 %", pp.11~18 (2003)
19. F. H. Karg, "Development and manufacturing of CIS thinfilm solar modules’", Sol. Energy Mater. Sol. Cells, 66, pp.645~ (2001)
20. M. Turcu, "Compositional trends of defectenergies, band alignments, and recombination mechanismsin the Cu(In,Ga)(Se,S)2 alloy system’", Thin Solid Films, 158, pp.431~432 (2003)
21. W. K. Metzger, "Recombination kineticsand stability in polycrystalline Cu(In,Ga)Se2 solar cells", Thin Solid Films, 517, pp.2360~ (2009)
22. J. F. Guillemoles, "Stability issues of Cu(In,Ga)Se2-basedsolar cells’", J. Phys. Chem. B, 104, pp.4849~ (2000)
23. S. Shirakata, "Effectsof CdS buffer layers on photoluminescence properties ofCu(In,Ga)Se2 solar cells’", Sol. Energy Mater. Sol. Cells, 93, pp.988~ (2009)
24. N. B. Chaure, "Electrodeposition of p+, p, i, n and n+type copper indium gallium diselenide for developmentof multilayer thin film solar cells’", Thin Solid Films, 472, pp.212~ (2005)
25. S. Khelifi, "Characterization of flexible thin film CIGS solar cellsgrown on different metallic foil substrates’", Energy Procedia, 2, pp.109~ (2010)
26. S. Niki, "CIGS absorbers andprocesses’", Prog. Photovolt: Res. Appl, 18, pp.453~ (2010)
27. M. B. Ard, "Growth ofCu(In,Ga)Se2 thin films by coevaporation using alkaliprecursors", Thin Solid Films, 9, pp.361~362 (2000)
28. C. D. R. Ludwig, "Indium-gallium segregation inCuInxGa1−xSe2: an ab initio-based Monte Carlo study", Phys. Rev. Lett, 105 (2010)
29. S. H. Wei, "The effects ofGa addition to CuInSe2 on its electronic, structural, anddefect properties’", Appl. Phys. Lett, 72, pp.3199~ (1998)
30. J. Werner, "Efficiency limitations ofpolycrystalline thin film solar cells: case of Cu(InGa)Se2", Thin Solid Films, 480, pp.399~ (2005)
31. L. Gütay, "Spectrally resolved photoluminescencestudies on Cu(InGa)Se2 solar cells withlateral submicron resolution’", Thin Solid Films, 515, pp.6212~ (2007)
32. M. A. Arturo, "A simple model of graded band-gapCuInGaSe2 solar cells’", Energy Procedia, 2, pp.169~ (2010)
33. S. Seyrling, "Cu(In,Ga)Se2photovoltaic devices for tandem solar cell application", Thin Solid Films, 517, pp.2411~ (2009)
34. O. Savadogo, "Chemically and electrochemically depositedthin films for solar energy materials", Sol. Energy Mater.Sol. Cells, 52, pp.361~ (1998)
35. R. W. Birkmire, "Polycrystalline thin filmsolar cells: present status and future potential’", Annu. Rev.Mater. Sci, 27, pp.625~ (1997)
36. J. W. Dini, "Electrodeposition- The materials science ofcoatings and substrates" (1992), Noyes Publications
37. 이상민, "CIGS 박막의 전착에 관한 연구", 전기화학회지, 13(2), pp.89~95 (2010), 한국전기화학회
38. M. E. Calixto, "Controlling growth chemistry and morphologyof single bath electrodeposited Cu(In,Ga)Se2 thin films forphotovoltaic application", J. Electrochem. Soc, 153, pp.521~ (2006)
39. J. Zank, "‘Electrochemical codepositionof indium and gallium for chalcopyrite solarcel", Thin Solid Films, 286, pp.259~ (1996)
40. R. Friedfeld, "Electrodepositionof CuInxGa1xSe2 thin films’", Sol. Energy Mater.Sol. Cells, 58, pp.375~ (1999)
41. A. M. Hermann, "Deposition of smoothCu(In,Ga)Se2 films from binary multilayers’", Thin SolidFilms, 74, pp.361~362 (2000)
42. M. Kaelin, "Low costprocessing of CIGS thin film solar cells’", Solar Energy, 77, pp.749~ (2004)
43. D. Lincot, "Chalcopyrite thin film solarcells by electrodeposition’", Solar Energy, 77, pp.725~ (2004)
44. R. N. Bhattacharya, "12.3% efficient Culn1−xGaxSe2-based devicefrom electrodeposited precursor’", J. Electrochem. Soc, 144, pp.1376~ (1997)
45. R. N. Bhattacharya, "14.1% CuIn1−xGaxSe2-based photovoltaic cells from electrodepositedprecursors’", J. Electrochem. Soc, 145, pp.3435~ (1998)
46. R. N. Bhattacharya, "15.4% CuIn10−xGaxSe2-based photovoltaic cells from solution-basedprecursor films’", Thin Solid Films, 396, pp.361~362 (2000)
47. R. N. Bhattacharya, "CuIn1−xGaxSe2-based photovoltaic cells from electrodeposited precursorfilms’", Sol. Energy Mater. Sol. Cells, 76, pp.331~ (2003)
48. N. Guimard, "Efficeicnt CIGS solar cells prepared byelectrodeposition’", Proceedings of the 3rd world conferenceon photovoltaic energy convention, pp.11~18 (2003)
49. A. Kampmann, , Proceedings ofthe MRS 2003 Spring Meeting
50. M. Ganchev, "Preparation ofCu(In,Ga)Se2 layers by selenization of electrodepositedCu-In-Ga precursors", Thin Solid Films, 325, pp.511~512 (2006)
51. P. J. Dale, "Deposition and characterizationof copper chalcopyrite based solar cells using electrochemicaltechniques’", ECS Transactions, 6, pp.535~ (2007)
52. R. N. Bhattacharya, "Thin-film CuIn1−xGaxSe2 photovoltaic cells fromsolution-based precursor layers’", Appl. Phys. Lett, 75, pp.1431~ (1999)
53. Y. Lai, "Cyclic voltammetry study of electrodeposition ofCu(In,Ga)Se2 thin films’", Electrochim. Acta, 54, pp.3004~ (2009)
54. S. Aksu, "Electrodeposition ofIn-Se and Ga-Se thin films for preparation of CIGS solarcells’", Electrochem. Solid-State Lett, 12, pp.33~ (2009)
55. T. Matsuoka, "Preparation andcharacterization of electrodeposited CuGaxIn1−xSe2 thinfilms’", Jpn. J. Appl. Phys, 33, pp.6105~ (1994)
56. D. Xia, "Electrodeposited andselenized CIGS thin films for solar cells", J. Non Cryst.Solids, 354, pp.1447~ (2008)
57. A. M. Fer´nadeza, "Electrodepositionof CuIn1−xGaxSe2 precursor films: optimizationof film composition and morphology’", Thin Solid Films, 474, pp.10~ (2005)
58. R. N. Bhattacharya, "The performance of CuIn1−xGaxSe2-based photovoltaic cells prepared from low-costprecursor films’", Sol. Energy Mater. Sol. Cells, 63, pp.367~ (2000)
59. J. Kois, "Electrodepositionof Cu-In-Ga thin metal films for Cu(In,Ga)Se2based solar cells’", Thin Solid Films, 516, pp.5948~ (2008)
60. Feng Kang, "Properties of CuInxGa1−xSe2 thin films grown from electrodeposited precursors with different levels of selenium content", Current Applied Physics, 10(3), pp.886~888 (2010), 한국물리학회
61. M. Engelmann, "Formation and analysis of graded Cu(In(Se1−ySy)2’", ThinSolid Films, 387, pp.14~ (2001)
62. I. Dirnstorfer, "Annealing studies on CuIn(Ga)Se2: theinfluence of gallium’", Thin Solid Films, 400, pp.361~362 (2000)
63. Y. P. Fu, "CuIn1xGaxSe2 absorberlayer fabricated by pulse-reverse electrodeposition techniquefor thin film solar cell’", J. Electrochem. Soc, 156, pp.553~ (2009)
64. R. N. Bhattacharya, "Electrodeposited two-layer Cu-In-Ga-Se", In-Se thin films’, 2010, pp.157, 406~
65. D. Shivagan, "Electrodeposition of chalcopyrite films from ionicliquid electrolytes", Thin Solid Films, 515, pp.5899~ (2007)
66. R. Inguanta, "Fabricationand photoelectrochemical behavior of ordered CIGSnanowire arrays for application in solar cells’", Electrochem.Solid-State Lett, 13, pp.22~ (2010)
67. J. E. Jaffe, "Theory of band gap anomalyin ABC2 chalcopyrite semiconductors’", Phys. Rev. B, 29, pp.1882~ (1984)
68. Development of CIS-based compound thin film solar cells’, "K. Yoon", Korea Institute of Energy Research, ~, pp.KIER-A62419 (2006)
69. S. R. Kodigala, "Thin films and nanostructures- Cu(In1−xGax)Se2 based thin film solar cells’" (2010), Elsevier

관련 논문AI추천