국산 소경재의 휨 성질을 이용한 충격에너지와 최대하중까지 일-에너지 예측연구
Study on the Prediction of the Work-energy to the Maximum Load and Impact Bending Energy from the Bending Properties
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This research investigates the bending properties to predict the work-energy to maximum load and impact bending energy from static bending and impact bending test. Specimens were prepared from lumber made of thinning crop-trees. Matched specimens were used for MC 12% and green moisture specimens to measure the effect of moisture content on the absorbed energy from static and impact bending tests. The bending properties such as MOE, MOR, etc. is a good predictor to investigate the work-energy and work-energy per unit volume from static bending and impact bending test. The impact bending energy is increased with increasing moisture content. However, the work to maximum load from static bending test is increasing with increasing the MC only for higher density species.
Abstract
This research investigates the bending properties to predict the work-energy to maximum load and impact bending energy from static bending and impact bending test. Specimens were prepared from lumber made of thinning crop-trees. Matched specimens were used for MC 12% and green moisture specimens to measure the effect of moisture content on the absorbed energy from static and impact bending tests. The bending properties such as MOE, MOR, etc. is a good predictor to investigate the work-energy and work-energy per unit volume from static bending and impact bending test. The impact bending energy is increased with increasing moisture content. However, the work to maximum load from static bending test is increasing with increasing the MC only for higher density species.
참고문헌 (8)
- Adamopoulos, S, "Strength properties of juvenile and mature wood in black locust", Wood and Fiber Sci, 39(2), pp.241~249 (2007)
- "American Society for Testing and Materials. 1986. Standard test method of testing small clear specimens for timber. ASTM D 143. ASTM, Philadelphia, PA.", ~ (1986)
- Evans, J. W, "Juvenile wood effect in red alder: analysis of physical and mechanical data to delineate juvenile and mature wood zones", Forest Prod. J, 50(7), pp.75~87 (2000)
- Hearman.R.F.S, "Theory of vibration testing of wood", Forest Prod. J, 16(8), pp.29~40 (1966)
- Wang, J. C, "Dynamic test for evaluating decay in wood", Forest Prod. J, 30(7), pp.35~37 (1980)
- 차재경, "국내산 침엽수목재의 섬유포화점측정 및 기계적 성질에 대한 함수율의 영향", 산림과학, 20, pp.43~51 (2007)
- 차재경, "VARTM(Vacuum assisted resin transfer molding)방법에 의해 보강된 목재 및 파티클보드를 유리섬유로 보강한 복합소재의 성질", 목재공학, 35(3), pp.29~35 (2007)
- 한국표준협회, "목재 휨 시험방법. KS F 2211" (2004)