국내산 낙엽송 소경각재의 허용응력 산출
Allowable Stress Calculation of Domestic Japanese Larch Small Diameter Lumbers
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Sustainable energy consumption and increasing CO2 emissions stimulate Eco-friendly industry. Wood has positive various properties as alternative energy such as solar, wind and water. Wood provide lumber, pallet, paper, pulp and fuel through production process. Even Korea republic has 63.7% of forest rates, weather condition makes low forestry production capacity. For utilization of domestic small diameter log needs study mechanical properties. In this study, various properties tested on domestic Japanese Larch small diameter lumbers and make mechanical properties table for allowable stress calculation. Result of compressive test, allowable compressive stress is 13 MPa. Allowable bending stress is 12 MPa.
Abstract
Sustainable energy consumption and increasing CO2 emissions stimulate Eco-friendly industry. Wood has positive various properties as alternative energy such as solar, wind and water. Wood provide lumber, pallet, paper, pulp and fuel through production process. Even Korea republic has 63.7% of forest rates, weather condition makes low forestry production capacity. For utilization of domestic small diameter log needs study mechanical properties. In this study, various properties tested on domestic Japanese Larch small diameter lumbers and make mechanical properties table for allowable stress calculation. Result of compressive test, allowable compressive stress is 13 MPa. Allowable bending stress is 12 MPa.
참고문헌 (9)
- 산림청, "입업통계연보. 제41호", 서울, 한국, ~ (2011)
- 한국표준협회, "KS F 2150 목구조용 실대재 의 휨 시험 방법", 서울, 한국, ~ (2004)
- 한국표준협회, "KS F 2198 목재의 밀도 및 비중 측정 방법", 서울, 한국, ~ (2001)
- 한국표준협회, "KS F 2199 목재의 함수율 측정 방법", 서울, 한국, ~ (2001)
- 한국표준협회, "KS F 2206 목재의 압축 시험 방법", 서울, 한국, ~ (2004)
- 한국표준협회, "KS F 2208 목재의 휨 시험 방법", 서울, 한국, ~ (2004)
- 한국표준협회, "KS F 3021 구조용 집성재", 서울, 한국, ~ (2005)
- ASTM., "ASTM D 198:09 Standard test methods of static tests of lumber in structural sizes, USA", ~ (2009)
- ASTM., "ASTM D 2915:10 Practice for sampling and data-analysis for structural wood and wood-based products. USA", ~ (2010)