Effects of Heating Temperature and Time on the Physical Properties of Heat-Treated Wood
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study was performed to investigate the effects of heat treatment on the physicalproperties of two species of wood under different heating conditions including at 180℃ for 12h and 24h, and at 210℃ for 3h and 6h. Heat treatment tests for Pinus densiflora and Larixkaempferi were performed in order to assess the effects on the properties of dimension, weight,density loss, and water absorption. The results showed heat treatment caused significant changesin physical properties such as the dimension, weight, density loss and amount of waterabsorption. The dimension, weight and density of wood after heat treatment decreased as theheating temperature and time were increased. The amount of water absorption was lower inheat-treated wood than that in solid wood until 48hours. However, the water absorption ofheat-treated wood was higher in heat-treated wood than that in solid wood at 96hours. Theamount of water absorption of solid Pinus densiflora was higher than that of solid Larixkaempferi.
Abstract
This study was performed to investigate the effects of heat treatment on the physicalproperties of two species of wood under different heating conditions including at 180℃ for 12h and 24h, and at 210℃ for 3h and 6h. Heat treatment tests for Pinus densiflora and Larixkaempferi were performed in order to assess the effects on the properties of dimension, weight,density loss, and water absorption. The results showed heat treatment caused significant changesin physical properties such as the dimension, weight, density loss and amount of waterabsorption. The dimension, weight and density of wood after heat treatment decreased as theheating temperature and time were increased. The amount of water absorption was lower inheat-treated wood than that in solid wood until 48hours. However, the water absorption ofheat-treated wood was higher in heat-treated wood than that in solid wood at 96hours. Theamount of water absorption of solid Pinus densiflora was higher than that of solid Larixkaempferi.
참고문헌 (13)
- Bekir CB., "Some physical and mechanical properties of thermally modified juvenile and mature black pine wood", Eur. J. Wood Prod, 72, pp.61~66 (2014)
- Borrega M, "Mechanical behavior of heat-treated spruce(Picea abies)wood at constant moisture content and ambient humidity", Holz als Roh-und Werkstoff, 66, pp.63~69 (2008)
- Brito JO, "Chemical composition changes in Eucalyptus and Pinuswoods submitted to heat treatment", Bioresour Technol, 99, pp.8545~8548 (2008)
- Cademartoria PHG, "Effect of thermal treatment on physicochemical properties of Gympie messmate wood", Ind Crops Prod, 45, pp.360~366 (2013)
- Esteves B, "Influence of steam heating on the properties of pine(Pinus Pinaster)and eucalypt(Eucalypus globulus)wood", Wood Sci Technol, 41(3), pp.193~207 (2007)
- Hakkou M, "Investigation of wood wettability changes during heat treatment on the basis of chemical analysis", Polymer degradation and stability, 89(1), pp.1~5 (2005)
- Kartal SN, "Water absorption of boron-treated and heat-modified wood", J Wood Sci, 53, pp.454~457 (2007)
- Korkut S, "Performance of three thermally treated tropical wood species commonly used in Turkey", Ind Crops Prod, 36, pp.355~362 (2012)
- Sini MK, "The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170℃, 19 0℃, 210℃ and 230℃", Holz als Roh-und Werkstoff, 64, pp.192~197 (2006)
- Sivonen H, "Magnetic resonance studies of thermally modified wood", Holzforschung, 56(6), pp.648~654 (2002)
- Effects of heat treatment on modulus of elasticity of beech wood, "Yildiz SC", ~, pp.IRG (2002), WP 02-40222
- Yildiz S, "Mechanical and chemical behavior of spruce wood modified by heat", Build Environ, 41, pp.1762~1766 (2006)
- 원경록, "Effects of Heating Temperature and Time on the Mechanical Properties of Heat-Treated Woods", 목재공학, 43(2), pp.168~176 (2015), 한국목재공학회[DOI]