논문KCI 등재
Formation of nickel oxide thin film and analysis of its electrical properties
2
조회
0
다운로드
0
인용
0
참고문헌
주제분류공학일반
초록
Abstract
Ni oxide thin films with thermal sensitivity superior to Pt and Ni thin films were formed through annealing treatment after Ni thin films were deposited by a r.f. magnetron sputtering method. Resistivity values of Ni oxide thin films were in the range of 10.5 μΩcm to 2.84 × 104 μΩcm according to the degree of Ni oxidation. Also temperature coefficient of resistance(TCR) values of Ni oxide thin films depended on the degree of Ni oxidation from 2,188 ppm/oC to 5,630 ppm/oC in the temperature range of 0~150 oC. Because of the high linear TCR and resistivity characteristics, Ni oxide thin films exhibit much higher sensitivity to flow and temperature changes than pure Ni thin films and Pt thin films.
참고문헌 (10)
- J. E. Sundeen, "Electrical properties of nickel-zirconia cermet films for temperature and flow-sensor application", a 63, pp.33~40 (1997)
- A. F. P. Van Putten, "Integrated silicon anemometer", 10, pp.425~426 (1974)
- K. Petersen, "high-performance mass-flow sensor with integrated laminarflow micro-channels", pp.361~363 (1985)
- P. Rudent, "Design of a new sensor for mass flow controller using thin-film technology based on an analytical thermal model", a 16, pp.3559~3563 (1998)
- S. K. Park,S. H. Kim,S. H. Kim, "A flow direction sensor fabricated using MEMS technology and its simple interface circuit", b 91, pp.2003~
- J. E. Sudden, "Thermal sensor properties of cermet resistor films on silicon substrates", a 90, pp.118~124 (2001)
- J. M. Nel,F. D. Auret,L. Wu,M. J. Legodi, "Fabrication and Characterisation of NiO", Zno structures, 2004., pp.b 100, 270~276
- S. S. Noh,C. S. Lim,G. S. Chung,and K. H. Kim, "Fabrication of PRTs and analysis of Characteristics", 39, pp.1179~ (2003)
- S. S. Noh,D. H. Kim,G. S. Chung,H. P. Kim, "Development of Trimming Technology in High-fine Resistor Using U.V. Laser", 11, pp.6~ (2002)
- J. Zang,Y. Nagao,S. Kuwano, "Microstructure and Temperature Coefficient of Resistance of Platinum Films", pp.36~834 (1997)
관련 논문AI추천
Parameter dependence of nickel oxide nanoparticles prepared by pulsed-laserablationLeszek Zbroniec, Naoto Koshizaki, Takeshi Sasaki청정에너지연구소 · Journal of Ceramic Processing Research2005 · 제6권 제2호Thermal Evaporation 법에 의해 제조된 WO3 박막과 NiO-WO3 박막의 전기적 특성에 관한 연구나동명, 나은영, 박진성한국전기화학회 · 전기화학회지2005 · 제8권 제1호Electrodeposition characteristics and Magnetic Properties of CoFeNi Thin Film AlloysDaeheumKim, DoyoungYoon, JaesongSong, NosangMyung한국전기화학회 · 전기화학회지2002 · 제5권 제1호P-type Electrical Characteristics of the Amorphous La2NiO4+δ Thin Films김정주, 이정아, 이준형, 허영우, Dang-Hoang Hop한국표면공학회 · 한국표면공학회지2018 · 제51권 제4호ITO/Ni/ITO 박막의 광학적 전기적 특성 연구김동원, 김상호, 김소라, 서정은, 이인선한국표면공학회 · 한국표면공학회지2005 · 제38권 제2호Resistivity Variation of Nickel Oxide by Substrate Heating in RF Sputter for Microbolometer이용수한국센서학회 · 센서학회지2015 · 제24권 제5호
