Chemiresistive Sensor Array Based on Semiconducting Metal Oxides for Environmental Monitoring
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
We present gas sensing performance based on 2X2 sensor array with four different elements (TiO2, SnO2, WO3 and In2O3 thin films) fabricated by rf sputter. Each thin film was deposited onto the selected SiO2/Si substrate with Pt interdigitated electrodes (IDEs) of 5 ㎛ spacing which were fabricated on a SiO2/Si substrate using photolithography and dry etching. For 5 ppm NO2 and 50 ppm CO, each thin film sensor has a different response to offers the distinguishable response pattern for different gas molecules. Compared with the conventional micro-fabrication technology, 2X2 sensor array with such remarkable response pattern will be open a new foundation for monolithic integration of high-performance chemoresistive sensors with simplicity in fabrication, low cost, high reliablity, and multifunctional smart sensors for environmental monitoring.
Abstract
We present gas sensing performance based on 2X2 sensor array with four different elements (TiO2, SnO2, WO3 and In2O3 thin films) fabricated by rf sputter. Each thin film was deposited onto the selected SiO2/Si substrate with Pt interdigitated electrodes (IDEs) of 5 ㎛ spacing which were fabricated on a SiO2/Si substrate using photolithography and dry etching. For 5 ppm NO2 and 50 ppm CO, each thin film sensor has a different response to offers the distinguishable response pattern for different gas molecules. Compared with the conventional micro-fabrication technology, 2X2 sensor array with such remarkable response pattern will be open a new foundation for monolithic integration of high-performance chemoresistive sensors with simplicity in fabrication, low cost, high reliablity, and multifunctional smart sensors for environmental monitoring.
참고문헌 (11)
- N. Barsan, "Metal oxide-based gas sensor research: How to?", Sens. Actuator B-Chem., 121, pp.18~35 (2007)
- N. El Barbri, "Building of a metal oxide gas sensorbased electronic nose to assess the freshness of sardines under cold storage", Sens. Actuator B-Chem., 128, pp.235~244 (2007)
- A. Kolmakov, "Enhanced gas sensing by individual SnO2nanowires and nanobelts functionalized with Pd catalyst particles", Nano Lett., 5, pp.667~673 (2005)
- C. W. Na, "Selective detection of NO2 and C2H5OH using a Co3O4-decorated ZnO nanowire network sensor", Chem. Commun., 47, pp.5148~5150 (2011)
- G. Korotcenkov, "Material Design for Metal Oxide Chemiresistive Gas Sensors", 센서학회지, 22(1), pp.1~17 (2013), 한국센서학회
- H. G. Moon, "Embossed TiO2 Thin Films with Tailored Links between Hollow Hemispheres: Synthesis and Gas-Sensing Properties", The journal of physical chemistry. C, Nanomaterials and Interfaces, 115, pp.9993~9999 (2011), American Chemical Society
- H. G. Moon, "Extremely Sensitive and Selective NO Probe Based on Villi-like WO3 Nanostructures for Application to Exhaled Breath Analyzers", ACS Applied Materials & Interfaces, 5(21), pp.10591~10596 (2013), American Chemical Society
- C. M. Hangarter, "Conducting polymer nanowires for chemiresistive and FET-based bio", chemical sensors, 2010, pp.20, 3131~3140
- N. M. Kiasari, "Room temperature ultra-sensitive resistive humidity sensor based on single zinc oxide nanowire", Sens. Actuator BChem., 182, pp.101~105 (2012)
- G. Chen, "Enhanced gas sensing in pristine carbon nanotubes under continuous ultraviolet light illumination", Sci Rep 2, 2, pp.1~7 (2012)
- J. L. Zofio, "Environmental efciency and regulatory standards: the case of CO2 emissions from OECD industries", Resource and Energy Economics, 23, pp.63~83 (2001)