Material Design for Metal Oxide Chemiresistive Gas Sensors

키워드

참고문헌 (100)

1. G. Korotcenkov, "Conductometric metal oxide gas sensors, In Chemical Sensors, Vol. 4: Solid State Devices", pp.39~186 (2011), Momentum Press
2. D. Kohl, "Surface processes in the detection of reducing gases with SnO2-based devices", Sens. Actuators, 18, pp.71~113 (1989)
3. N. Barsan, "Fundamental and practical aspects in the design of nanoscaled SnO2 gas sensors. A status report", Fresen. J. Anal. Chem, 365, pp.287~304 (1999)
4. A. Gurlo, "Interplay between O2 and SnO2 : Oxygen ionosorption and spectroscopic evidence for adsorbed oxygen", ChemPhysChem, 7, pp.2041~2052 (2006)
5. M. Batzill, "Surface science studies of gas sensing materials: SnO2", Sensors, 6, pp.1345~1366 (2006)
6. N. Barsan, "Conduction model of metal oxide gas sensors", J. Electroceram, 7(3), pp.143~167 (2001)
7. V. Brynzari, "Theoretical study of semiconductor thin film gas sensitivity: Attempt to consistent approach", J. Electron. Technol, 33, pp.225~235 (2000)
8. D.E. Williams, "Semiconducting oxides as gassensitive resistors", Sens. Actuators B, 57, pp.1~16 (1999)
9. G. Korotcenkov, "Metal oxides for solid state gas sensors: What determines our choice?", Mater. Sci. Eng. B, 139, pp.1~23 (2007)
10. G. Korotcenkov, "Chemical Sensors, Vol. 1-3: Fundamentals of Sensing Materials" (2011), Momentum Press
11. G. Korotcenkov, "Practical aspects in design of oneelectrode semiconductor gas sensors: status report", Sens. Actuators B, 121, pp.664~678 (2007)
12. G. Korotcenkov, "Ozone measuring: What can limit the application of SnO2-based gas sensors?", Sens. Actuators B, 161, pp.28~44 (2012)
13. J. L. Solis, "Semiconductor gas sensors based on nanostructured tungsten oxide", Thin Solid Films, 391, pp.255~260 (2001)
14. U. Hoefer U, "High temperature Ga2O3 gas sensors and SnO2 gas sensors: A comparison", Sens. Actuators B, 78, pp.6~11 (2001)
15. G. K. Mor, "A room-temperature TiO2-nanotube hydrogen sensor able to self-clean photoactively from environmental contamination", J. Mater. Res, 19, pp.628~634 (2004)
16. A. B. Gadkari, "Ferrite gas sensors", IEEE Sensor J, 11(4), pp.849~861 (2011)
17. H. Meixner, "Metal oxide sensors", Sens. Actuators B, 33, pp.198~202 (1999)
18. J. Tamaki, "Dilute hydrogen sulfide sensing properties of CuO-SnO2 thin film prepared by low-pressure evaporation method", Sens. Actuators B, 49, pp.121~125 (1998)
19. G. Korotcenkov, "Instability of metal oxide-based conductometric gas sensors and approaches to stability improvement", Sens. Actuators B, 156, pp.527~538 (2011)
20. G. Korotcenkov, "Faceting characterization of SnO2 nanocrystals deposited by spray pyrolysis from SnCl4-5H2O water solution", Thin Solid Films, 471, pp.310~319 (2005)
21. G. Korotcenkov, "The nature of processes controlling the kinetics of indium oxide-based thin film gas sensor response", Sens. Actuators B, 128, pp.51~63 (2007)
22. G. Korotcenkov, "Thin film SnO2- based gas sensors: Film thickness influence", Sens. Actuators B, 142, pp.321~330 (2009)
23. G. Korotcenkov, "Gas response control through structural and chemical modification of metal oxides: State of the art and approaches", Sens. Actuators B, 107, pp.209~232 (2005)
24. G. Korotcenkov, "The role of morphology and crystallographic structure of metal oxides in response of conductometric-type gas sensors", Mater. Sci. Eng. R, 61, pp.1~39 (2008)
25. V. Brinzari, "Factors influencing the gas sensing characteristics of tin dioxide films deposited by spray pyrolysis: understanding and possibilities for control", Thin Solid Films, 391, pp.167~175 (2001)
26. G. Korotcenkov, "Distinguishing feature of metal oxide films' structural engineering for gas sensor application", J. Phys.: Confer. Series, 15, pp.256~261 (2005)
27. N. Yamazoe, "Effects of additives on semiconductor gas sensors", Sens. Actuators, 4, pp.283~289 (1983)
28. G. Korotcenkov, "Grain size effects in sensor response of nanostruc-tured SnO2- and In2O3-based conductometric gas sensor", Crit. Rev. Sol. St. Mater. Sci, 34(1), pp.1~17 (2009)
29. A. Gurlo, "Grain size control in nanocrystalline In2O3 semiconductor sensors", Sens. Actuators B, 44, pp.327~333 (1997)
30. G. Korotcenkov, "The influence of film structure on In2O3 gas response", Thin Solid Films, 460, pp.308~316 (2004)
31. G. Korotcenkov, "The role of the grain size in thermal stability of nanostructured SnO2 and In2O3 metal oxides films aimed for gas sensor application", Prog. Crystal. Growth, 58, pp.167~208 (2012)
32. G. Korotcenkov, "Structural stability of In2O3 films deposited by spray pyrolysis during thermal annealing", Thin Solid Films, 479, pp.38~51 (2005)
33. G. Korotcenkov, "(Cu, Fe, Co or Ni)-doped SnO2 films deposited by spray pyrolysis: Doping influence on film morphology", J. Mater. Sci, 43(8), pp.2761~2770 (2008)
34. G. Korotcenkov, "(Cu, Fe, Co and Ni)-doped SnO2 films deposited by spray pyrolysis : Doping influence on thermal stability of SnO2 film structure", Mater. Chem. Phys, 113, pp.756~763 (2009)
35. Z. R. Dai, "Ultra-long single crystalline nanoribbons of tin oxide", Sol. St. Commun, 118, pp.351~354 (2001)
36. Z. R. Dai, "Novel nanostructures of functional oxides ssynthesized by thermal evaporation", Adv. Funct. Mater, 13(1), pp.9~24 (2003)
37. X. L. Ma, "Growth mode of the SnO2 nanobelts synthesized by rapid oxidation", Chem. Phys, 376, pp.794~798 (2003)
38. L. Huang, "Controlled growth of well-faceted zigzag tin oxide mesostructures", Appl. Phys. Let, 87, pp.163124~ (2005)
39. M. Law, "Photochemical sensing of NO2 with SnO2 nanoribbon nanosensors at room temperature", Angew. Chem. Int. Ed, 41, pp.2405~2408 (2002)
40. J. D. Prades, "Equivalence between thermal and room temperature UV light-modulated responses of gas sensors based on individual SnO2 nanowires", Sens. Actuators B, 140, pp.337~342 (2009)
41. C. Li, "In2O3 nanowires as chemical sensors", Appl. Phys. Lett, 82, pp.1613~1615 (2003)
42. D. H. Zhang, "Detection of NO2 down to ppb levels using individual and multiple In2O3 nanowire devices", Nano Lett, 4, pp.1919~1924 (2004)
43. M.-W. Ahn, "Gas sensing properties of defect-controlled ZnOnanowire gas sensor", Appl. Phys. Lett, 93, pp.263103~ (2008)
44. A. Kolmakov, "Enhanced gas sensing by individual SnO2 nanowires and nanobelts functionalized with Pd catalyst particles", Nano Lett, 5, pp.667~673 (2005)
45. J. M. Baik, "Pdsensitized single vanadium oxide nanowires: Highly responsive hydrogen sensing based on the metalinsulator transition", Nano Lett, 9, pp.3980~3984 (2009)
46. C. S. Rout, "Room temperature hydrogen and hydrocarbon sensors based on single nanowires of metal oxides", J. Phys. D, 40, pp.2777~2782 (2007)
47. L. H. Qian, "CO sensor based on Au-decorated SnO2 nanobelt", Mater. Chem. Phys, 10, pp.82~84 (2006)
48. Q. Kuang, "Enhancing the photonand gas-sensing properties of a single SnO2 nanowire based nanodevice by nanoparticle surface functionalization", J. Phys. Chem. C, 112, pp.11539~11544 (2008)
49. T. Y. Wei, "Gigantic enhancement in sensitivity using Schottky contacted nanowire nanosensor", J. Am. Chem. Soc, 131, pp.17690~17695 (2009)
50. J. S. Tresback, "Low-temperature gas sensing in individual metal-oxide-metal heterojunction nanowires", J. Mater. Res, 23, pp.2047~2052 (2008)
51. L. Liao, "Single CeO2 nanowire gas sensor supported with Pt nanocrystals: Gas sensitivity, surface bond states, and chemical mechanism", J. Phys. Chem. C, 112, pp.9061~9065 (2008)
52. V. Kumar, "Copper doped SnO2 nanowires as highly sensitive H2S gas sensor", Sens. Actuators B, 138, pp.587~590 (2009)
53. L. Liao, "The sensitivity of gas sensor based on single ZnO nanowire modulated by helium ion radiation", Appl. Phys. Lett, 91, pp.173110~ (2007)
54. Z. M. Zeng, "The detection of H2S at room by using individual indium oxide nanowire transistors", Nanotechnol, 20, pp.045503~ (2009)
55. Y. Liu, "Growth of aligned squareshaped SnO2 tube arrays", Adv. Mater, 15(1), pp.57~62 (2005)
56. P. Feng, "Achieving fast oxygen response in individual β-Ga2O3 nanowires by ultraviolet illumination", Appl. Phys. Lett, 89, pp.112~114 (2006)
57. Z. Lin, "Highly sensitive gas sensor based on coral-like SnO2 prepared with hydrothermal treatment", Sens. Actuators B, 173, pp.22~27 (2012)
58. J.-H. Lee, "Gas sensors using hierarchical and hollow oxide nanostructures: Overview", Sens. Actuators B, 140, pp.319~336 (2009)
59. K. Okuyama, "Preparation of functional nanostructured particles by spray drying", Adv. Powder Technol, 17, pp.587~611 (2006)
60. P. Colombo, "Fabrication of ceramic components with hierarchical porosity", J. Mater. Sci, 45, pp.5425~5455 (2010)
61. M. Hayashi, "Effects of microstructure of mesoporous SnO2 powders on their H2 sensing properties", Sens. Actuators B, 141, pp.465~470 (2009)
62. A. Rothschild, "Gas sensors: New materials and processing approaches", J Electroceram, 17, pp.1005~1012 (2006)
63. Y. Wang, "Template synthesis of nanostructured materials via layer-by-layer assembly", Chem. Mater, 20, pp.848~858 (2008)
64. T. L. Wadea, "Template synthesis of nanomaterials", Eur. Phys. J., Appl. Phys, 29, pp.3~22 (2005)
65. W. Yue, "Crystalline mesoporous metal oxide", Prog. Nat. Sci, 18, pp.1329~1338 (2008)
66. C. Sanchez, "Design, synthesis, and properties of inorganic and hybrid thin films having periodically organized nanoporosity", Chem. Mater, 20, pp.682~737 (2008)
67. O. K. Varghese, "Hydrogen sensing using titania nanotubes", Sens. Actuators B, 93, pp.338~344 (2003)
68. Y. Li, "Fabrication of TiO2 nanotube thin films and their gas sensing properties", J. Sensors, 2009, pp.402174~ (2009)
69. S. Rani, "Synthesis and applications of electrochemically self-assembled titania nanotube arrays", Phys. Chem. Chem. Phys, 12, pp.2780~2800 (2010)
70. J.-H. Jeun, "CuO-loaded nanoporous SnO2 films fabricated by anodic oxidation and RIE process and their gas sensing properties", Sens. Actuators B, 151, pp.1~7 (2010)
71. M. Tiemann, "Porous metal oxides as gas sensors", Chem. Eur. J, 13, pp.8376~8388 (2007)
72. Y. Shimizu, "Mesoporous semiconducting oxides for gas sensor application", J. Eur. Ceram. Soc, 24, pp.1389~1398 (2004)
73. Y. Shimizu, "Preparation of large mesoporous SnO2 powders for gas sensor application", Sens. Actuators B, 108, pp.56~61 (2005)
74. G. S. Devi, "Synthesis of mesoporous TiO2-based powders and their gas-sensing properties", Sens. Actuators B, 87, pp.122~129 (2002)
75. T. Hyodo, "Gassensing properties of ordered mesoporous SnO2 and effects of coating thereof", Sens. Actuators B, 93, pp.590~600 (2003)
76. T. Wagner, "Ordered mesoporous ZnO for gas sensing", Thin Solid Films, 515, pp.8360~8363 (2007)
77. Q. Liu, "Aqueous route for mesoporous metal oxides using inorganic metal source and their applications", Micropor. Mesopor. Mater, 100, pp.233~240 (2007)
78. K. Choi, "Enhanced CO sensing characteristics of hierarchical and hollow In2O3 microspheres", Sens. Actuators B, 138(4), pp.97~503 (2009)
79. E. Rossinyol, "Mesostructured pure and coppercatalyzed tungsten oxide for NO2 detection", Sens. Actuators B, 126, pp.18~23 (2007)
80. E. Rossinyol, "Synthesis and characterization of chromiumdoped mesoporous tungsten oxide for gas sensing applications", Adv. Funct. Mater, 17, pp.1801~1806 (2007)
81. L. He, "Development of sensors based on CuO-doped SnO2 hollow spheres for ppb level H2S gas sensing", J. Mater. Sci, 44, pp.4326~4333 (2009)
82. T. Hyodo, "Preparation and gas-sensing properties of thermally stable mesoporous SnO2", Sens. Actuators B, 83, pp.209~215 (2002)
83. C. Shao, "A novel method for making silica nanofibers by using electrospun fibers of polyvinyl alcohol", silica composite as precursor, 2002, pp.13, 635~637
84. Z. Miao, "Electrochemically induced sol-gel sreparation of single-crystalline TiO2 nanowires", Nano Lett, 2, pp.717~720 (2002)
85. B. Ding, "Titanium dioxide nanofibers prepared by using electrospinning method", Fiber. Polym, 5, pp.105~109 (2004)
86. I. Raible, "V2O5 nanofibers: Novel gas sensors with extremely high sensitivity and selectivity to amines", Sens. Actuators B, 106, pp.730~735 (2005)
87. R. Luoh, "Electrospun nanocomposite fiber mats as gas sensors", Composites. Sci. Technol, 66, pp.2436~2441 (2006)
88. S. K. Lim, "Preparation of mesoporous In2O3 nanofibers by electrospinning and their application as a CO gas sensor", Sens. Actuators B, 149, pp.28~33 (2010)
89. J.-A. Park, "Structure and CO gas sensing properties of electrospun TiO2 nanofibers", Mater. Lett, 64, pp.255~257 (2010)
90. I. Kim, "Ultrasensitive chemiresistors based on electrospun TiO2 nanofibers", Nano Lett, 6, pp.2009~2013 (2006)
91. Y. Zhang, "Fabrication and ethanol-sensing properties of micro gas sensor based on electrospun SnO2 nanofibers", Sens. Actuators B, 132, pp.67~73 (2008)
92. O. Landau, "Processing-microstructure-properties correlation of ultrasensitive gas sensors produced by electrospinning", Chem. Mater, 21, pp.9~11 (2009)
93. A. Yang, "Room temperature gas sensing properties of SnO2", multiwallcarbonnanotube composite nanofibers, 2007, pp.91, 133110~
94. Y. Wang, "Detection of moisture and methanol gas using a single electrospun tin oxide nanofiber", IEEE Sensors J, 7, pp.1347~1348 (2007)
95. G. Wang, "Fabrication and characterization of polycrystalline WO3 nanofibers and their application for ammonia sensing", J. Phys. Chem. B, 110, pp.23777~23782 (2006)
96. Z. Li, "Highly sensitive and stable humidity nanosensors based on LiCl doped TiO2 electrospun nanofibers", J. Am. Chem. Soc, 130, pp.5036~5037 (2008)
97. M. Yang, "Fabrication and photoelectric oxygen sensing characteristics of electrospun Co doped ZnO nanofibers", Appl. Phys. A-Mat. Sci. Process, 89, pp.427~430 (2007)
98. K. Sahner, "Electrodeposited and sol-gel precipitated p-type SrTi1-x FexO3-δsemiconductors for gas sensing", Sensors, 7, pp.1871~1886 (2007)
99. G. Wang, "Fabrication and characterization of polycrystalline WO3 nanofibers and their application for ammonia sensing", J. Phys. Chem. B, 110, pp.23777~23782 (2006)
100. N. M. Vuong, "Realization of an open space ensemble for nanowires: a strategy for the maximum response in resistive sensors", J. Mater. Chem, 22, pp.6716~6725 (2012)

관련 논문AI추천