Development of Stretchable PZT/PDMS Nanocomposite Film with CNT Electrode
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The piezoelectric composite film of ferroelectric PZT ceramic (PbZrxTi1-xO3) and polymer (PDMS, Polydimethylsiloxane) wasprepared to improve the flexibility of piezoelectric material. The bar coating method was applied to fabricate flexible nanocomposite film with large surface area by low cost process. In the case of using metal electrode on the composite film, although there is no problem by bending process, the electrode is usually broken away from the film by stretching process. However, the well-attached, flexible CNT electrode on PZT/PDMS film improved flexibility, especially stretchability. PZT particles was usually settled down into polymer matrix due to gravity of the weighty particle, so to improve the dispersion of PZT powder in polymer matrix, small amount of additives (CNT powder, Carbon nanotube powder) was physically mixed with the matrix. By stretching the film, an output voltage of PZT(70 wt%)/PDMS with CNT (0.5 wt%) was measured.
Abstract
The piezoelectric composite film of ferroelectric PZT ceramic (PbZrxTi1-xO3) and polymer (PDMS, Polydimethylsiloxane) wasprepared to improve the flexibility of piezoelectric material. The bar coating method was applied to fabricate flexible nanocomposite film with large surface area by low cost process. In the case of using metal electrode on the composite film, although there is no problem by bending process, the electrode is usually broken away from the film by stretching process. However, the well-attached, flexible CNT electrode on PZT/PDMS film improved flexibility, especially stretchability. PZT particles was usually settled down into polymer matrix due to gravity of the weighty particle, so to improve the dispersion of PZT powder in polymer matrix, small amount of additives (CNT powder, Carbon nanotube powder) was physically mixed with the matrix. By stretching the film, an output voltage of PZT(70 wt%)/PDMS with CNT (0.5 wt%) was measured.
참고문헌 (10)
- G. Shirane, "Crystal structure of Pb(Zr- Ti)O3", J. Phys. Soc. Jpn, 7, pp.333~ (1952)
- N. Setter, "Electroceramics: looking ahead", J. Eur. Ceram. Soc, 21, pp.1279~1293 (2001)
- H. Jaffe, "Piezoelectric ceramics", J. Am. Ceram. Soc, 41, pp.494~4988 (1958)
- T. Furukawa, "Piezoelectricity and pyroelectricity in polymers", IEEE Trans. Electr. Insul, 24, pp.375~394 (1989)
- R. G. Kepler, "Piezoelectricity in polymers", Crit. Rev. Solid. State. Mater. Sci, 9, pp.399~447 (1980)
- G. M. Sessler, "Electromechanical response of cellular electret films", J. Appl. Phys. Lett, 75, pp.3405~3407 (1999)
- X. Chen, "1.6 V nanogenerator for mechanical energy harvesting using PZT nanofibers", Nano Lett, 10, pp.2133~2137 (2010)
- G. Zhu, "Flexible high-output nanogenerator based on lateral ZnO nanowire array", Nano Lett, 10, pp.3151~3155 (2010)
- Y. Hwang, "Piezoelectric properties of polypeptide- PMMA molecular composites fabricated by contact charging", Polymer, 52, pp.2723~2728 (2011)
- K. I. Park, "Flexible nanocomposite generator made of BaTiO3 nanoparticles and graphitic carbons", Adv. Mater, 24, pp.2999~3004 (2012)