3축 힘 센서가 적용된 손목 굽힘 재활로봇 개발
Development of a wrist bending rehabilitation robot with a three-axis force sensor
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper describes the development of a rehabilitation robot that can provide wrist bending exercise to a severe stroke patient staying in a bed ward or at home. The developed rehabilitation robot has a three-axis force sensor which detects three directional force Fx, Fy, and Fz. The sensor measures a bending force (Fz) exerted on the wrist and the signal force (Fx and Fy) which can be used for the safety purpose. The robot was designed for severe stroke patients in bed, and the robot program was developed to perform a wrist bending rehabilitation exercise. In our tests including a nine-day experimental exercise, the developed force sensor-based robot operated effectively and safely.
Abstract
This paper describes the development of a rehabilitation robot that can provide wrist bending exercise to a severe stroke patient staying in a bed ward or at home. The developed rehabilitation robot has a three-axis force sensor which detects three directional force Fx, Fy, and Fz. The sensor measures a bending force (Fz) exerted on the wrist and the signal force (Fx and Fy) which can be used for the safety purpose. The robot was designed for severe stroke patients in bed, and the robot program was developed to perform a wrist bending rehabilitation exercise. In our tests including a nine-day experimental exercise, the developed force sensor-based robot operated effectively and safely.
참고문헌 (16)
- P. R. Culmer, "A control strategy for upper limb robotic rehabilitation with a dual robot system", IEEE, 2010, pp.15(4), 575~585
- L. Pan, "Safety supervisory strategy for an upper-limb rehabilitation robot based on impedance control", International Journal of Advanced Robotic Systems, 10, pp.1~12 (2013)
- H. Kim, "Kinematic data analysis for post-stroke patients following bilateral versus unilateral rehabilitation with an upper limb wearable robotic system", IEEE Transactions on Neural Systems and Rehabilitation Engineering, 21(2) (2013)
- C. Li, "A self-controlled robot for upper limb rehabilitation", Proceedings of the 2010 IEEE International Conference on Information and Automation, pp.115~118 (2010)
- M. H. Rahman, "Modeling and development of an exoskeleton robot for rehabilitation of wrist movements", Advanced Intelligent Mechatronics(AIM), IEEE, 2010, 25~30
- B. C. Tsai, "An articulated rehabilitation robot for upper limb physiotherapy and training", Intelligent Robots and Systems(IROS), IEEE, 2010, 1470~1475
- S. Liu, "Interactive control for the arm rehabilitation robot", Intelligent Systems and Applications, International Workshop on, pp.1~4 (2009)
- W. Huo, "Control of upper-limb power-assist exoskeleton based on motion intention recognition", IEEE International Conference on Robotics and Automation, pp.2243~2248 (2011)
- A. Umemura, "A study on powerassisted rehabilitation robot arms operated by patient with upper limb disabilities", Rehabilitation Robotics, ICORR, IEEE International Conference on, pp.451~456 (2009)
- Y. Ren, "Developing a wholearm exoskeleton robot with hand opening and closing mechanism for upper limb stroke rehabilitation", Rehabilitation Robotics, ICORR, IEEE International Conference on, pp.761~765 (2009)
- K. Nagai, "Development of a small six-component force", torque sensor based on the double-cross structure, 2004, pp.22(3), 361~369
- G. S. Kim, "Development of the 6-axis force", moment sensor for an intelligent robot's gripper, 2005, pp.118, 127~134
- 김용국, "발목재활로봇을 위한 6축 힘", 모멘트센서 설계, 2013, pp.19(4), 357~363[DOI]
- 김갑순, "손목굽힘운동 재활로봇을 위한 3축 힘센서 설계", 센서학회지, 22(2), pp.118~123 (2013), 한국센서학회[DOI]
- Torque Sensor, "Multi-Axis Forcre", pp.2005, ATI Industrial Automation
- 김갑순, "다축 힘", 모멘트 센서 교정기의 개발 및 그의 불확도 평가, 2007, pp.24(10), 91~98[DOI]