본문 바로가기
KERD
논문KCI 등재

실내 대기질 진단을 위한 금속산화물 기반 폼알데하이드 가스센서 연구 동향

Review of Metal Oxide-based Formaldehyde Gas Sensor to Measure Indoor Air Quality

1

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류공학일반

초록

People currently spend more than 80% of their time indoors; therefore, the management of indoor air quality has become an important issue. The contamination of indoor air can cause sick house syndrome and various environmental diseases such as atopy and nephropathy. Formaldehyde gas, which is the main contaminant of indoor air, is lethal even with microscopic exposure; however, it is commonly used as an adhesive and waterproofing agent for indoor building materials. Therefore, there is a need for a gas sensor capable of detecting trace amounts of formaldehyde gas. In this review, we summarize recent studies on metal oxide-based semiconductor gas sensors for formaldehyde gas detection, methods to improve the gas-sensing properties of metal oxides of various dimensions, and the effects of catalysts for the detection of parts-per-billion level gases. Through this, we discuss the necessary characteristics of the metal oxidebased semiconductors for gas sensors for the development of next-generation sensors.

Abstract

People currently spend more than 80% of their time indoors; therefore, the management of indoor air quality has become an important issue. The contamination of indoor air can cause sick house syndrome and various environmental diseases such as atopy and nephropathy. Formaldehyde gas, which is the main contaminant of indoor air, is lethal even with microscopic exposure; however, it is commonly used as an adhesive and waterproofing agent for indoor building materials. Therefore, there is a need for a gas sensor capable of detecting trace amounts of formaldehyde gas. In this review, we summarize recent studies on metal oxide-based semiconductor gas sensors for formaldehyde gas detection, methods to improve the gas-sensing properties of metal oxides of various dimensions, and the effects of catalysts for the detection of parts-per-billion level gases. Through this, we discuss the necessary characteristics of the metal oxidebased semiconductors for gas sensors for the development of next-generation sensors.

참고문헌 (33)

  1. "WHO: air pollution is single biggest environmental health risk", The Guardian, ~ (2014)
  2. 함진식, "신축 공동주택의 포름알데히드 농도 발생특성과 저감대책에 관한 연구", 대한건축학회논문집, 28(09), pp.261~268 (2012), 대한건축학회
  3. Ministry of Environment, "Plan of Indoor Air Quality Control (2015~2019)", ~ (2015)
  4. Ministry of Environment(South Korea), "Indoor Air Quality Control Act", Enforcement Date 13. Jun, 2018, ~ (2018)
  5. WHO Regional Office for Europe, "WHO Guidelines for Indoor Air Quality: Selected Pollutants", ~ (2010)
  6. Ministry of Environment and National Institute of Environmental Research (South Korea), "Indoor Air Quality Guideline", ~ (2012)
  7. WHO Regional Office for Europe, "Air Quality Guidelines" (2001), Publisher, City
  8. U.S. Department of Health and Human Services, "Occupational Safety and Health Guideline for Formaldehyde Potential Human Carcinogen" (1988)
  9. 이장현, "독성가스 감지용 센서 기술 동향 리뷰", 센서학회지, 24(5), pp.311~318 (2015), 한국센서학회[DOI]
  10. A. Bielanski, "Electric Conductivity and Catalytic Activity of Semiconducting Oxide Catalysts", Nature, 179(4561), pp.668~669 (1957)
  11. S. -J. Choi, "Electrospun Nanostructures for High Performance Chemiresistive and Optical Sensors", Macromol. Mater. Eng, 302(8), pp.1600569(1)~1600569(37) (2017)
  12. N. Barsan, "Fundamental and practical aspects in the design of nanoscaled SnO2 gas sensors : a status report", Fresenius J. Anal. Chem, 365(4), pp.287~304 (1999)
  13. N. Hongsith, "Enhancement of sensor response by TiO2 mixing and Au coating on ZnO tetrapod sensor", Sens. Actuator B, 147(2), pp.502~507 (2010)
  14. Q. Huang, "Room temperature formaldehyde sensors with enhanced performance, fast response and recovery based on zinc oxide quantum dots", graphene nanocomposites, 2012, pp.4(18), 5651~5658
  15. L. Peng, "Ultraviolet-assisted gas sensing : A potential formaldehyde detection approach at room temperature based on zinc oxide nanorods", Sens. Actuator B, 136(1), pp.80~85 (2009)
  16. H. Liu, "Solution-Processed Gas Sensors Employing SnO2 Quantum Dot", MWCNT Nanocomposites, 2016, pp.8(1), 840~846
  17. J. Zhai, "Visible-light-induced photoelectric gas sensing to formaldehyde based on CdS nanoparticles", ZnO heterostructures, 2010, pp.147(1), 234~240
  18. Y. Li, "Ligand-free and size-controlled synthesis of oxygen vacancy-rich WO3-x quantum dots for efficient room-temperature formaldehyde gas sensing", RSC Adv, 6(98), pp.95747~95752 (2016)
  19. S. Tian, "Poresize-dependent sensing property of hierarchical SnO2 mesoporous microfibers as formaldehyde sensors", Sens. Actuator B, 186(1), pp.640~647 (2013)
  20. H. Dua, "Formaldehyde gas sensor based on SnO2", In2O3 heteronanofibers by a modified double jets electrospinning process, 2012, pp.166-167(1), 746~752
  21. H. Tian, "Zeolitic Imidazolate Framework Coated ZnO Nanorods as Molecular Sieving to Improve Selectivity of Formaldehyde Gas Sensor", ACS Sens, 1(3), pp.243~250 (2016)
  22. D. Wang, "Mesoporous Ultrathin SnO2Nanosheets in Situ Modified by Graphene Oxide for Extraordinary Formaldehyde Detection at Low Temperatures", ACS Appl. Mater. Interfaces, 11(13), pp.12808~12818 (2019)
  23. R. Kim, "A General Synthesis of Crumpled Metal Oxide Nanosheets as Superior Chemiresistive Sensing Layers", Adv. Funct. Mater, 29(31), pp.1903128(1)~1903128(10) (2019)
  24. Y. Cao, "Tungsten oxide clusters decorated ultrathin In2O3 nanosheets for selective detecting formaldehyde", Sens. Actuator B, 252(1), pp.232~238 (2017)
  25. M. H. Oh, "Galvanic Replacement Reactions in Metal Oxide Nanocrystals", Science, 340(6135), pp.964~968 (2013)
  26. J. -S. Jang, "Metal Organic Framework-Templated Chemiresistor : Sensing Type Transition from P-to-N Using Hollow Metal Oxide Polyhedron via Galvanic Replacement", J. Am. Chem. Soc, 139(34), pp.11868~11876 (2017)
  27. J. -S. Jang, "Heterogeneous, Porous 2D Oxide Sheets via Rapid Galvanic Replacement : Toward Superior HCHO Sensing Application", Adv. Funct. Mater, 29(42), pp.1903012(1)~1903012(10) (2019)
  28. N. Yamazoe, "Oxide semiconductor gas sensors", Catal. Surv. Asia, 7(1), pp.63~75 (2003)
  29. W. Wei, "High sensitive and fast formaldehyde gas sensor based on Ag-doped LaFeO3 nanofibers", J. Alloy. Comp, 695(1), pp.1122~1127 (2017)
  30. Y. -Y. Xue, "Mesoporous Ag", In2O3 composite derived from indium organic framework as high performance formaldehyde sensor, 2017, pp.251(1), 170~175
  31. J. Deng, "Design of CuO–TiO2 heterostructure nanofibers and their sensing performance", J. Mater. Chem. A, 2(24), pp.9030~9034 (2014)
  32. J. -Y. Kang, "Perovskite La0. 75Sr0. 25Cr0. 5Mn0. 5O3-δ sensitized SnO2 fiber-intube scaffold : highly selective and sensitive formaldehyde sensing", J. Mater. Chem. A, 6(22), pp.10543~10551 (2018)
  33. Y. J. Jeong, "Bio-inspired heterogeneous sensitization of bimetal oxides on SnO2 scaffolds for unparalleled formaldehyde detection", Chem. Commun, 55(25), pp.3622~3625 (2019)

관련 논문AI추천

이 간행물의 다른 논문 (12건)