이산화탄소 감지를 위한 4.26 µm 필터용 poly Si/SiO2 다층 박막 기반의 패브리 페로-필터
Si/SiO2 Multilayer-based Fabry–Perot Filter for 4.26 µm Filtering in Carbon Dioxide Detection
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, the relationship between the transmitted light intensity and full-width-at-half-maximum (FWHM) of a Fabry–Perot filter was investigated. The measured refractive indices and absorption coefficients of the fabricated thin films were applied to the Fabry–Perot filter via simulations using optical software. Although considerable research has been conducted on Fabry–Perot filters, this study focused on the usefulness of 4.26-µm infrared filtering in carbon dioxide detection. Optical analysis was performed considering the effects of the thickness, refractive indices, and number of thin films in a distributed Bragg reflector. Ultimately, a clear trade-off relationship was observed wherein the transmitted light intensity decreased as the number of multilayers increased; however, the FWHM was observed to be narrower.
Abstract
In this study, the relationship between the transmitted light intensity and full-width-at-half-maximum (FWHM) of a Fabry–Perot filter was investigated. The measured refractive indices and absorption coefficients of the fabricated thin films were applied to the Fabry–Perot filter via simulations using optical software. Although considerable research has been conducted on Fabry–Perot filters, this study focused on the usefulness of 4.26-µm infrared filtering in carbon dioxide detection. Optical analysis was performed considering the effects of the thickness, refractive indices, and number of thin films in a distributed Bragg reflector. Ultimately, a clear trade-off relationship was observed wherein the transmitted light intensity decreased as the number of multilayers increased; however, the FWHM was observed to be narrower.
참고문헌 (10)
- N. Ma, "Novel Solid Electrolyte CO2 Gas Sensors Based on c-Axis-Oriented Y-Doped La9. 66Si5. 3B0. 7O26. 14", ACS Appl. Mater. Interfaces, 12(19), pp.21515~21520 (2020)
- H. Wang, "Solidstate potentiometric CO2 sensor combining Li3PO4 with MoO3-doped Li2CO3 sensing electrode", Ionics, 25(7), pp.3397~3406 (2019)
- M. Struzik, "A Simple and Fast Electrochemical CO2 Sensor Based on Li7La3Zr2O12 for Environmental Monitoring", Adv. Mater., 30(44), pp.1804098~ (2018)
- T. V. K. Karthik, "Porous silicon ZnO", SnO2 structures for CO2 detection, 2018, pp.731(15), 853~863
- D. Y. Kim, "A carbon dioxide gas sensor based on cobalt oxide containing barium carbonate", Sens. Actuators B Chem., 248, pp.987~992 (2017)
- H. Liu, "Design of a six-gas NDIR gas sensor using an integrated optical gas chamber", Opt. Express, 28(8), pp.11451~11462 (2020)
- S. Esfahani, "Development of a Tuneable NDIR Optical Electronic Nose", Sensors, 20(23), pp.6875~ (2020)
- 이승환, "Infrared Light Absorbance: a New Method for Temperature Compensation in Nondispersive Infrared CO2 Gas Sensor", 센서학회지, 29(5), pp.303~311 (2020), 한국센서학회
- H. H. Ma, "Characterization of Novel Fabry Pérot Filter Arrays for Nanospectrometers in Medical Applications", pp.2012