Effect of corrugation structure and shape on the mechanical stiffness of the diaphragm
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Here, we studied the change in the mechanical stiffness of a diaphragm according to the corrugation pattern. The diaphragm consists of a silicon oxide and nitride double layer; a corrugation pattern was formed by dry etching, and the diaphragm was released by wet etching. The fabrication of the thin film was verified using focused ion beam and scanning electron microscopy images. The mechanical stiffness of the diaphragm was obtained by measuring the surface vibration using a laser Doppler vibrometer while applying external sound pressure. Flat squares, diaphragms with square corrugations, and circular corrugation patterns were measured and compared. The stiffness of the diaphragm with a corrugation structure was found to be smaller than that without a corrugation structure; in particular, circular corrugation showed a better effect because of the high symmetry. Furthermore, the effect of corrugation was theoretically predicted. The proposed corrugated diaphragm showed comparable flexibility with the state-of-the-art MEMS microphone diaphragm.
Abstract
Here, we studied the change in the mechanical stiffness of a diaphragm according to the corrugation pattern. The diaphragm consists of a silicon oxide and nitride double layer; a corrugation pattern was formed by dry etching, and the diaphragm was released by wet etching. The fabrication of the thin film was verified using focused ion beam and scanning electron microscopy images. The mechanical stiffness of the diaphragm was obtained by measuring the surface vibration using a laser Doppler vibrometer while applying external sound pressure. Flat squares, diaphragms with square corrugations, and circular corrugation patterns were measured and compared. The stiffness of the diaphragm with a corrugation structure was found to be smaller than that without a corrugation structure; in particular, circular corrugation showed a better effect because of the high symmetry. Furthermore, the effect of corrugation was theoretically predicted. The proposed corrugated diaphragm showed comparable flexibility with the state-of-the-art MEMS microphone diaphragm.
참고문헌 (11)
- M. Pedersen, "A silicon condenser microphone with polyimide diaphragm and backplate", Sens. Actuator A Phys., 63(2), pp.97~104 (1997)
- M. Ohring, "Material science of thin films", pp.711~779 (2002), Academic Press
- M. Fueldner, "Handbook of silicon based MEMS materials and technologies", pp.937~948 (2020), Elsevier
- M. Fu, "Analytical analysis and finite element simulation of advanced membranes for silicon microphones", IEEE Sens. J., 5(5), pp.857~863 (2005)
- P. R. Scheeper, "The design, fabrication, and testing of corrugated silicon nitride diaphragms", J. Microelectromech. Syst., 3(1), pp.36~42 (1994)
- R. Kressmann, "Silicon condenser microphones with corrugated silicon oxide", nitride electret membranes, 2002, pp.100(2-3), 301~309
- C. H. Huang, "Implementation of the CMOS MEMS condenser microphone with corrugated metal diaphragm and silicon backplate", Sensors, 11(6), pp.6257~6259 (2011)
- 김준수, "Development of apparatus for Single-sided Wet Etching and its applications in Corrugated Membrane Fabrication", 센서학회지, 30(1), pp.10~14 (2021), 한국센서학회
- J. Lu, "High quality factor silicon cantilever driven by PZT actuator for resonant based mass detection", 2008Symposium on Design, Test, Integration and Packaging of MEMS, 2008, 60~65
- A. Dehé, "The infineon silicon MEMS microphone’", presented at the AMA Conferences - SENSOR 2013 Nürnberg (2013)
- W. K. Schomburg, "Introduction to microsystem design", pp.43~69 (2015), Springer-Verlag