3D 프린팅 센서 연구 동향 소개-전왜성 변형/로드셀 센서 중심으로
A review of 3D printing technology for piezoresistive strain/loadcell sensors
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The conventional microelectromechanical system (MEMS) process has been used to fabricate sensors with high costs and high-volume productions. Emerging 3D printing can utilize various materials and quickly fabricate a product using low-cost equipment rather than traditional manufacturing processes. 3D printing also can produce the sensor using various materials and design its sensing structure with freely optimized shapes. Hence, 3D printing is expected to be a new technology that can produce sensors on-site and respond to on-demand demand by combining it with open platform technology. Therefore, this paper reviews three standard 3D printing technologies, such as Fused Deposition Modeling (FDM), Direct Ink Writing (DIW), and Digital Light Processing (DLP), which can apply to the sensor fabrication process. The review focuses on strain/load sensors having both sensing material features and structural features as well. NCPC (Nano Carbon Piezoresistive Composite) is also introduced as a promising 3D material due to its favorable sensing characteristics
Abstract
The conventional microelectromechanical system (MEMS) process has been used to fabricate sensors with high costs and high-volume productions. Emerging 3D printing can utilize various materials and quickly fabricate a product using low-cost equipment rather than traditional manufacturing processes. 3D printing also can produce the sensor using various materials and design its sensing structure with freely optimized shapes. Hence, 3D printing is expected to be a new technology that can produce sensors on-site and respond to on-demand demand by combining it with open platform technology. Therefore, this paper reviews three standard 3D printing technologies, such as Fused Deposition Modeling (FDM), Direct Ink Writing (DIW), and Digital Light Processing (DLP), which can apply to the sensor fabrication process. The review focuses on strain/load sensors having both sensing material features and structural features as well. NCPC (Nano Carbon Piezoresistive Composite) is also introduced as a promising 3D material due to its favorable sensing characteristics
참고문헌 (27)
- H. Liu, "3D Printing Flexible Strain Sensors : From Printing to Devices and Signals", Adv. Mater., 33(8), pp.2004782(1)~2004782(19) (2021)
- T. Blachowicz, "3D Printed MEMS Technology—Recent Developments and Applications", Micromachines, 11(4), pp.434(1)~434(14) (2020)
- A. Mora, "Electrical conductivity of CNT", polymer composites: 3D printing, measurements and modeling, 2020, pp.183, 107600(1)~107600(28)
- S. J. Leigh, "A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors", PLoS One, 7(11), pp.e49365(1)~e49365(6) (2012)
- 오승한, "세라믹 3D 프린팅 소개와 치과분야에서의 활용가능성", 대한치과의사협회지, 58(7), pp.448~459 (2020), 대한치과의사협회[DOI]
- H. Guo, "Recent advances on 3D printing graphene-based composites", Nano Mater. Sci., 1(2), pp.101~115 (2019)
- S. H. Ko, "Printing for Micro", nano-fabrication, 2019, pp.59(3), 22~43
- G. Postiglione, "Conductive 3D microstructures by direct 3D printing of polymer", carbon nanotube nanocomposites via liquid deposition modeling, 2015, pp.76, 110~114
- K. Gnanasekaran, "3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling", Appl. Mater. Today, 9, pp.21~28 (2017)
- I. P. Kang, "A Carbon Nanotube Strain Sensor for Structural Health Monitoring", Smart Mater. Struct., 15(3), pp.737~748 (2006)
- 강인필, "탄소나노튜브 스마트 복합소재의 전기적 임피던스 변화를 이용한 나노센서의 센싱 특성 연구", 동력시스템공학회지, 13(1), pp.65~71 (2009), 한국동력기계공학회
- 김성용, "3D 프린팅을 활용한 탄소 나노 튜브 전왜성 복합소재 기반 압력 센서 개발 연구", 대한기계학회논문집 A, 41(3), pp.187~192 (2017), 대한기계학회
- K. Y. Joung, "3DPrinted Load Cell Using Nanocarbon Composite Strain Sensor", Sens., 21(11) (2021)
- J. F. Christ, "Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube", Thermoplastic Polyurethane Nanocomposites, 2019, pp.11(1), 11(1)~11(16)
- W. Huang, "Flexible and Lightweight Pressure Sensor Based on Carbon Nanotube", Thermoplastic Polyurethane-Aligned Conductive Foam with Superior Compressibility and Stability, 2017, pp.9(48), 42266~42277
- K. Li, "3D printed stretchable capacitive sensors for highly sensitive tactile and electrochemical sensing", Nanotechno, 29(18), pp.185501(1)~185501(8) (2018)
- X. Wan, "CNT-based electroresponsive shape memory functionalized 3D printed nanocomposites for liquid sensors", Carbon, 155, pp.77~87 (2019)
- T. D. Ngo, "Additive manufacturing(3D printing) : A review of materials, methods, applications and challenges", Compos. B Eng., 143, pp.172~196 (2018)
- T. Xiao, "3D Printing of Flexible Strain Sensor Array Based on UV-Curable Multiwalled Carbon Nanotube", Elastomer Composite, 2020, pp.6(1), 2000745(1)~200745(10)
- A. Cortés, "Mechanical and Strain-Sensing Capabilities of Carbon Nanotube Reinforced Composites by Digital Light Processing 3D Printing Technology", Polym, 12(4), pp.975(1)~975(15) (2020)
- G. Gonzalez, "Development of 3D printable formulations containing CNT with enhanced electrical properties", Polym., 109, pp.246~253 (2017)
- M. G. A. Mohamed, "Rapid and Inexpensive Fabrication of Multi-Depth Microfluidic Device using High-Resolution LCD Stereolithographic 3D Printing", Manuf. Mater. Process, 3(1), pp.26(1)~26(11) (2019)
- 강인필, "탄소나노튜브 복합소재 전왜 특성과 3D 프린팅을 활용한 로드셀 개발 연구", 드라이브·컨트롤, 17(4), pp.97~102 (2020), 사단법인 유공압건설기계학회
- J. F. Christ, "3D printed highly elastic strain sensors of multiwalled carbon nanotube", thermoplastic polyurethane nano composites, 2017, pp.131, 392~401
- K. Y. Kim, "3D printing of multiaxial force sensors using carbon nanotube(CNT)", thermoplastic polyurethane(TPU)filaments, 2017, pp.263, 493~500