그래핀/탄소나노섬유 코팅된 3D 프린팅 고분자 구조를 이용한 신축성 스트레인 센서
Stretchable Strain Sensors Using 3D Printed Polymer Structures Coated with Graphene/Carbon Nanofiber Hybrids
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
신축성 스트레인 센서는 웨어러블 기기나 건강 모니터링과 같은 미래 응용 분야에 적용하기 위하여 개발되고 있는데, 센서의 신뢰성을 높이기 위해 안정성과 반복성이 고려되어야 한다. 본 연구에서는 3D 프린팅을 통해 키리가미 패턴이 있는 고분자 구조를 제작하여 센서의 신축성과 히스테리시스를 개선하였다. 견고한 전도성 네트워크를 구현하기 위하여 그래핀과 탄소나노섬유를 혼합한 하이브리드 소재를 고분자 구조에 코팅하였다. 제작한 신축성 스트레인 센서는 32%의 스트레인에 대해 게이지팩터가 36을 보였으며, 1%부터 30%까지의 다양한 스트레인에 대해서 안정적인 저항 변화 응답을 나타냈다.
Abstract
Stretchable strain sensors have been developed for potential future applications including wearable devices and health monitoring. For practical implementation of stretchable strain sensors, their stability and repeatability are one of the important aspects to be considered. In this work, we utilized 3D printed polymer structures having kirigami patterns to improve the stretchability and reduce the hysteresis. The polymer structures were coated with graphene/carbon nanofiber hybrids to make a robust electrical network. The stretchable strain sensors showed a high gauge of 36 at a strain of 32%. Because of the kirigami structures and the robust graphene/carbon nanofiber coating, the sensors also exhibited stable resistance responses at various strains ranging from 1% to 30%.
참고문헌 (27)
- Shahrubudin, N., "An Overview on 3D Printing Technology : Technological, Materials, and Applications", Procedia Manufacturing, 35, pp.1286~1296 (2019)
- Christ, J. F., "3D Printed Highly Elastic Strain Sensors of Multiwalled Carbon Nanotube", Thermoplastic Polyurethane Nanocomposites, 2017, pp.131, 394~401
- Yin, Y. M., "Facile Fabrication of Flexible Pressure Sensor with Programmable Lattice Structure", ACS Applied Materials & Interfaces, 13(8), pp.10388~10396 (2021)
- Wang, Z., "Full 3D Printing of Stretchable Piezoresistive Sensor with Hierarchical Porosity and Multimodulus Architecture", Advanced Functional Materials, 29(11), pp.1807569~ (2019)
- Niknam, H., "3D Printed Accordion-like Materials : a Design Route to Achieve Ultrastretchability", Additive Manufacturing, 34, pp.101215~ (2020)
- Jiang, J., "3D Printing of Lightweight, Super-strong Yet Flexible All-cellulose Structure", Chemical Engineering Journal, 405, pp.126668~ (2021)
- Zhou, X., "All 3D-printed Stretchable Piezoelectric Nanogenerator with Non-protruding Kirigami Structure", Nano Energy, 72, pp.104676~ (2020)
- Sun, Y., "Geometric Design Classification of Kirigami-inspired Metastructures and Metamaterials", Structures, 33, pp.3633~3643 (2021)
- Nakajima, J., "Experimental Study on Tensile Properties of 3D Printed Flexible Kirigami Specimens", Additive Manufacturing, 32, pp.101100~ (2020)
- Li, H., "Kirigamibased Highly Stretchable Thin Film Solar Cells that are Mechanically Stable for more than 1000 Cycles", ACS Nano, 14(2), pp.1560~1568 (2020)
- Chen, W., "Kirigamiinspired Highly Stretchable, Conductive, and Hierarchical Ti3C2Tx MXene Films for Efficient Electromagnetic Interference Shielding and Pressure Sensing", ACS Nano, 15(4), pp.7668~7681 (2021)
- Venkataraman, A., "Carbon Nanotube Assembly and Integration for Applications", Nanoscale Research Letters, 14(1), pp.220~ (2019)
- Qu, S., "Carbon Nanotube Film Based Multifunctional Composite Materials : An Overview", Functional Composites and Structures, 2(2), pp.022002~ (2020)
- Garnett, E., "Introduction : 1D Nanomaterials", nanowires, 2019, pp.119(15), 8955~8957
- Piao, C, "Enhanced Dynamic Performance of Twisted and Coiled Soft Actuators Using Graphene Coating", Composites Part B: Engineering, 178, pp.107499~
- Zhu, Y., "Graphene and Graphene Oxide : Synthesis, Properties, and Applications", Advanced Materials, 22(35), pp.3906~3924 (2010)
- Suk, J. W., "Impact of Grain Boundaries on the Elastic Behavior of Transferred Polycrystalline Graphene", Chemistry of Materials, 32(14), pp.6078~6084 (2020)
- Suk, J. W., "Fracture of Polycrystalline Graphene Membranes by in situ Nanoindentation in a Scanning Electron Microscope", Physica Status Solidi-Rapid Research Letters, 9, pp.564~569 (2015)
- Novoselov, K. S., "Electric Field Effect in Atomically Thin Carbon Films", Science, 306(5696), pp.666~669 (2004)
- Hao, Y., "Enhancement of the Electrical Properties of Graphene Grown by Chemical Vapor Deposition via Controlling the Effects of Polymer Residue", Nano Letters, 13(4), pp.1462~1467 (2013)
- Lim, S., "Measurements of the Electrical Conductivity of Monolayer Graphene Flakes Using Conductive Atomic Force Microscopy", Nanomaterials, 11, pp.2575~ (2021)
- Chen, D., "Graphene Oxide : Preparation, Functionalization, and Electrochemical Applications", Chemical Reviews, 112(11), pp.6027~6053 (2012)
- Park, H., "Electrical Measurements of Thermally Reduced Graphene Oxide Powders Under Pressure", Nanomaterials, 9(10), pp.1387~ (2019)
- Piao, C., "Graphene", silver Nanowire Hybrid Coating for Improved Cycle Performance of Thermally-operated Soft Actuators, 2020, pp.10, 17553~
- Vo, T. T., "Synergistic Effect of Graphene", silver Nanowire Hybrid Fillers on Highly Stretchable Strain Sensors Based on Spandex Composites, 2020, pp.10, 2063~
- Al-Saleh, M.H., "A Review of Vapor Grown Carbon Nanofiber", polymer Conductive Composites, 2009, pp.47(1), 2~22
- 장호영, "폴리우레탄 기반 복합 섬유의 기계적, 전기적 특성", Composites Research, 33(2), pp.50~54 (2020), 한국복합재료학회[DOI]