p 형 반도체 층의 Mg 델타 도핑을 이용한 센서 광원 용 LED의 성능 향상
Improvement of the LED Performance Using Mg Delta-doing in p Type Cladding Layer for Sensor Application
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The efficacy improvement of the light emitting diode (LED) was studied for the realization of small-size, low power consumption, and highly sensitive bio-sensor instrument. The performance of the LED with Mg delta-doping at the interface of AlGaN/GaN superlattice in p type cladding layer was simulated. The device with Mg delta-doping showed improved current, radiative recombination rate, electroluminescence, and light output power compared to the conventional LED structure. Under the bias condition of 5 V, the improved device exhibited 20.8% increase in the light output power. This is attributed to the increment of hole concentration from stable ionization of Mg in p type cladding layer. This result is expected to be used for the miniaturization, power saving, and sensitivity improvement of the bio-sensor system.
Abstract
The efficacy improvement of the light emitting diode (LED) was studied for the realization of small-size, low power consumption, and highly sensitive bio-sensor instrument. The performance of the LED with Mg delta-doping at the interface of AlGaN/GaN superlattice in p type cladding layer was simulated. The device with Mg delta-doping showed improved current, radiative recombination rate, electroluminescence, and light output power compared to the conventional LED structure. Under the bias condition of 5 V, the improved device exhibited 20.8% increase in the light output power. This is attributed to the increment of hole concentration from stable ionization of Mg in p type cladding layer. This result is expected to be used for the miniaturization, power saving, and sensitivity improvement of the bio-sensor system.
참고문헌 (15)
- RACHIMVEGAPRADANA, "RGB-LED-based Optical Camera Communication using Multilevel Variable Pulse Position Modulation for Healthcare Applications", 센서학회지, 27(1), pp.6~12 (2018), 한국센서학회[DOI]
- H. Kudo, "A NADHdependent fiber-optic biosensor for ethanol determination with a UV-LED excitation system", Sens. Actuators B Chem, 141(1), pp.20~25 (2009)
- L. Umar, "Sensitivity and Photoperiodism Response of AlgaeBased Biosensor Using Red and Blue LED Spectrums", AIP Conf Proc, 2320, pp.050016(1)~050016(8) (2021)
- C. Vaghela, "LEDBased Portable Optical Biosensor for Measurement of Serum Urea Levels Using Urease Immobilized AgaroseGuar Gum Composite Film", IEEE Sens J, 18(17), pp.7273~7279 (2018)
- H. Wu, "Development of a novel LED color-switching type biosensor system for the visualization of fish stress responses", Anal. Methods, 11(43), pp.5623~5628 (2019)
- J. Simon, "Polarization-Induced Hole Doping in Wide-BandGap Uniaxial Semiconductor Heterostructures", Science, 327(5961), pp.60~64 (2010)
- H. Obloh, "Self-compensation in Mg doped p-type GaN grown by MOCVD", J. Cryst. Growth, 195(1-4), pp.270~273 (1998)
- P. Kozodoy, "MOVPE growth and characterization of Mg-doped GaN", J. Cryst. Growth, 195(1-4), pp.265~269 (1998)
- B. Schineller, "The influence of Mgconcentration and carrier gas on the electrical and optical properties of GaN : Mg grown by MOVPE", J. Cryst. Growth, 195(1-4), pp.274~279 (1998)
- T. Stephan, "Influence of Mg doping profile on the electroluminescence properties of GaInN multiple-quantumwell light-emitting diodes", Proc. SPIE, 5366, pp.118~345 (2004)
- W. Lee, "Effect of thermal annealing induced by p-type layer growth on blue and green LED performance", J. Cryst. Growth, 287(2), pp.577~581 (2006)
- Y. K. Su, "ESD engineering of nitride-based LEDs", IEEE Trans. Device Mater. Rel, 5(2), pp.277~281 (2005)
- S. Nakamura, "Thermal Annealing Effects on P-type Mg-Doped GaN Films", Jpn. J. Appl. Phys, 31(2B), pp.139~142 (1992)
- P. Kozodoy, "Polarization-enhanced Mg doping of AlGaN", GaN superlattices, 1999, pp.75(16), 2444~2446
- Y. Zhao, "Enhanced PType GaN Conductivity by Mg Delta Doped AlGaN", GaN Superlattice Structure, 2021, pp.14(1), 144~150