Influence of MWCNTs on Fracture Toughness of MWCNTs/Nickel-Pitch Fiber/Epoxy Composites
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The influence of MWCNTs on fracture toughness properties of MWCNTs/Nickel-Pitch Fibers/epoxy composites (MWCNTs/Ni-PFs/epoxy) was investigated according to MWCNTs content. Nickel-Pitch-based carbon fibers (Ni-PFs) were prepared by electroless nickel-plating. The surface properties of Ni-PFs were determined by scanning electron microscopy (SEM) and X-ray photoelectron spectrometry (XPS). The fracture toughness of MWCNTs/Ni-PFs/epoxy was assessed by critical stress intensity factor (KIC) and critical strain energy release rate (GIC). From the results, it was found that the fracture toughness properties of MWCNTs/Ni-PFs/epoxy were enhanced with increasing MWCNTs content, whereas the value decreased above 5 wt.%. MWCNTs content. This was probably considered that the MWCNTs entangled with each other in epoxy due to an excess of MWCNTs.
Abstract
The influence of MWCNTs on fracture toughness properties of MWCNTs/Nickel-Pitch Fibers/epoxy composites (MWCNTs/Ni-PFs/epoxy) was investigated according to MWCNTs content. Nickel-Pitch-based carbon fibers (Ni-PFs) were prepared by electroless nickel-plating. The surface properties of Ni-PFs were determined by scanning electron microscopy (SEM) and X-ray photoelectron spectrometry (XPS). The fracture toughness of MWCNTs/Ni-PFs/epoxy was assessed by critical stress intensity factor (KIC) and critical strain energy release rate (GIC). From the results, it was found that the fracture toughness properties of MWCNTs/Ni-PFs/epoxy were enhanced with increasing MWCNTs content, whereas the value decreased above 5 wt.%. MWCNTs content. This was probably considered that the MWCNTs entangled with each other in epoxy due to an excess of MWCNTs.
참고문헌 (19)
- Maikuma, H, "Bearing Strength and Damage Progress for PAN-Based and Pitch-Based Carbon Fiber", Composites Journal of Composite Materials, 27, pp.1739~1761 (1993)
- Chae, H. G, "High Strength and High Modulus Carbon Fibers", Carbon, 93, pp.81~87 (2015)
- Iijima, S, "Helical Microtubules of Graphitic Carbon", Nature, 354, pp.56~58 (1991)
- Jakubinek, M, "Single-walled Carbon Nanotube–epoxy Composites for Structural and Conductive Aerospace Adhesives", Composites Part B: Engineering, 69, pp.87~89 (2015)
- Gallo, G, "Electrical Characterization and Modeling of Carbon Nanotube and Carbon Fiber Self-sensing Composites for Enhanced Sensing of Microcracks", Materials Today Communications, 3, pp.17~26 (2015)
- Singh, B. P, "Effect of Length of Carbon Nanotubes on Electromagnetic Interference Shielding and Mechanical Properties of Their Reinforced Epoxy Composites", Journal of Nanoparticle Research, 16, pp.2161~ (2014)
- Lee, S.O, "Modification of Surface Functionality of Multi-walled Carbon Nanotubes on Fracture Toughness of Basalt Fiber-reinforced Composites", Composites Part B: Engineering, 79, pp.47~52 (2015)
- Park, S. J, "Interlaminar and Ductile Characteristics of Carbon Fibers-Reinforced Plastics Produced by Nanoscaled Electroless Nickel Plating on Carbon Fiber Surfaces", Journal of Colloid and Interface Science, 245, pp.282~290 (2002)
- 박미라, "Combined effect of corona discharge and enzymatic treatment on the mechanical and surface properties of wool", Journal of Industrial and Engineering Chemistry, 20(1), pp.179~183 (2014), 한국공업화학회
- Yim, Y. J, "Influence of Electroless Nickel-plating on Fracture Toughness of Pitch-based Carbon Fibre reinforced Composites", Composites Part B: Engineering, 76, pp.286~291 (2015)
- Seo, M.K, "A Kinetic Study on the Thermal Degradation of Multi-Walled Carbon Nanotubes-Reinforced Poly (propylene) Composites", Macromolecular Materials and Engineering, 289, pp.368~374 (2004)
- 최정란, "A study on thermal conductivity of electroless Ni–B plated multi-walled carbon nanotubes-reinforced composites", Journal of Industrial and Engineering Chemistry, 20(5), pp.3421~3424 (2014), 한국공업화학회[DOI]
- Casella, I, "Pulsed Electrodeposition of Nickel", palladium Globular Particles from an Alkaline Gluconate Bath. An Electro Chemical, XPS and SEM Investigation, 2013, pp.692, 80~86
- Griffith, A, "The Phenomena of Rupture and Flow in Solids", Philosophical Transactions of the Royal Society A, 221, pp.163~198 (1921)
- 문철환, "탄소섬유와 에폭시 기지의 계면강도 증가를 위한 황산", 질산 양극산화에 관한 영향, 2013, pp.37(1), 61~65[DOI]
- 임윤지, "다중벽 탄소나노튜브강화 폴리프로필렌 나노복합재료의 전자파 차폐효과 및 기계적 특성", 폴리머, 36(4), pp.494~499 (2012), 한국고분자학회[DOI]
- 박수진, "Studies on Cure Behaviors, Dielectric Characteristics and Mechanical Properties of DGEBA", Poly(ethylene terephthalate) Blends, 2009, pp.17(8), 585~590[DOI]
- Wei Dong, "Fracture toughness improvement of epoxy resins with short carbon fibers", Journal of Industrial and Engineering Chemistry, 20(4), pp.1220~1222 (2014), 한국공업화학회[DOI]
- 이시은, "Mechanical and thermal properties of MWCNT-reinforced epoxy nanocomposites by vacuum assisted resin transfer molding", Carbon Letters, 15(1), pp.32~37 (2014), 한국탄소학회